Office Automation :: Excel Process Continues Running (.Net Framework 3.5, VS.Net 2008, .Net 2008)
Apr 15, 2011
I'm calling the following method from a button click event to export a datatable to excel. After the export is completed, the excel application object is quit, released and assigned to nothing. But in reality it's not getting released and stays active unless the entire application is closed. So every time the button is clicked for export, a new excel application object keeps on running. The problem doesn't occur if two of the lines from the method below are not used. But I can't omit them as they are really needed. Check the * marked lines.
Code:
''' <summary>
''' Exports data from a datatable to excel.
''' </summary>
[code]....
View 1 Replies
ADVERTISEMENT
Apr 15, 2011
I'm calling the following method from a button click event to export a datatable to excel. After the export is completed, the excel application object is quit, released and assigned to nothing. But in reality it's not getting released and stays active unless the entire application is closed. So every time the button is clicked for export, a new excel application object keeps on running. How can I solve this?
The problem doesn't occur if two of the lines from the method below are not used. But I can't omit them as they are really needed. Check the * marked lines.
[Code]...
View 2 Replies
Apr 15, 2011
I'm calling the following method from a button click event to export a datatable to excel. After the export is completed, the excel application object is quit, released and assigned to nothing. But in reality it's not getting released and stays active unless the entire application is closed. So every time the button is clicked for export, a new excel application object keeps on running.The problem doesn't occur if two of the lines from the method below are not used. But I can't omit them as they are really needed. Check the * marked lines.[code]
View 4 Replies
Jun 17, 2009
I'm using excel via interop in application.Sometimes users kill application that created excel instance and that results in excel instance sitting in memory without any chance of disposing it.First I tried to tackle this using ROT(running object table) looks like not all instances of excel are registered there.Than I tried to somehow mark excel process after it is started via interop.[code]This works as long as excel is visible but in my case excel window is invisible.All I need is to somehow mark process that started via automation with the parent PID, so that later I can kill it if parent does not exist.
View 19 Replies
Sep 2, 2010
Excel process will not terminate...
Code:
oExcel = CreateObject("Excel.Application")
oBooks = oExcel.Workbooks
oBook = oBooks.Open(Filename:="C:Jared FC Project Desktopfixture tracking.xls", UpdateLinks:=False, ReadOnly:=False)
oSheet = oBook.Worksheets(1)
[Code] .....
View 6 Replies
Nov 13, 2009
I'm trying to create an excel file and load headers into the first row and then save the file to the local computer for later use. All of that works fine, but for some reason the "EXCEL" process won't quit. I have read through the tutorial written by Mike R and I have even tried just copying and pasting the code from the tutorial into my project, but to no avail. I should also note that I have not yet tried the "Extreme Measures" listed in the post, though at this point I am tempted to.
Code:
Dim ExcelApp As Excel.Application
Dim ExcelWorkBook As Excel.Workbook
[code]....
View 5 Replies
Dec 19, 2010
I got exactly the same situation as the following link. I need to end the excel process after calling it in Visual Basic. But it did not and I have to use task manager to kill EXCEL process manually.
[URL]
I have been trying the same solution mentioned in the above link but not successful. Can any body to take the code below to let me know what I am doing wrong?
Code:
Please use the CODE tags when posting code. Click on this post's quote button to see how.
View 8 Replies
Aug 19, 2011
I try to develop a automation-add-in for Excel which can get some data from our SQL DB. So i call my add from an Excel-cell.. like "=getThisFromDb()"... This works totally fine! But what if i want to write to another cell then just give a return value? I managed to get the running instance of excel. I can read from it. I can open a new document in it and write to it. ->> But can't write to the Worksheet that called me!!
View 2 Replies
Aug 24, 2009
I have an issue which has successfully busted my head all weekend. I created a COMAdd-in, in VB.NET (VS 2008) for Excel 2003. We now need to work the solution out for 2007 and since the layout and objects are a little different we had to make some critical Interface changes.Instead of a floating CommandBar we are now going with RibbonBar, which looks good but it doesn't work. Whenever I open Excel Workbook (which is the primary application). The Add-in successfully recognizes it and opens it up properly (bunch of Macro calls, layout settings etc). Anyway, after it opens, if I click on any button (on the new ribbon tab) I get "Application not properly initialize. Program will now close" and excel object is lost.
View 1 Replies
Aug 18, 2010
So I've been trying to write an Add-In for Excel for a week now. I already have the add-in made up in VBA (CustomUI.xml has been added too for a ribbon). I've been using it for awhile now from Excel's VBA Editor. But I want to get a bit more fancy with it, so I'm going to re-write it in VB.net since it's ribbon designer is nicer than writing XML code by hand. The only problem is, I've been very confused on how Visual Studio sets up all the references to Excel.As I've been looking through examples in threads across this forum I see a lot of people using this code to get access to Excel.
[Code]...
at the top of every sub routine that I'm going to be using excel in? Isn't that going to open a bunch of different windows and separate my code from the data I'm trying to manipulate?
View 2 Replies
Apr 20, 2010
I'm trying to open an excel file and then move around a little bit in the excel from VB 2008 and I having some problems. I'm trying next:
dim objExcel as excel.application
objExce = new excel.application
objExcel.visible=true
[code]......
View 2 Replies
Feb 12, 2009
The program creates the report in excel just fine and it creates the borders and headers. I want to know how can I printpreview an excel file from VB.net. You can refer a tutorial or explanation or sample of how can I do this.
View 12 Replies
Aug 9, 2010
I have a VB app that exports some data to dbf tabes.I have empty dbf files,I write data and then save them,all works fine,but now I need to export to a .xls file(I have a structure just like dbf),I need to write data to the file without having Excel installed.
View 9 Replies
May 12, 2010
In VBA I am able to search a text in an excel range like this:
Code:
Workbooks("Book1").Activate
With Worksheets(1).Range("C1:C10000")
[code].....
I have upgraded to Visual Studio because of the jobs I am to carry out. So I am translating all the codes from "VBA" to "VB.NET" (Visual Basic 2008)But I haven't been able to use "Find Method" in VB.NET. I am using Microsoft Office XP Standart Edition (2002 Version). I downloaded and installed Office XP PIAs. After that I referenced them in my project. I used the code Code:Imports Microsoft.Office.Interop.ExcelBut I can't do what I want Now, how can I use "Find Method" in Visual Basic 2008 to find a text in an excel range in one of my workbooks?
View 4 Replies
Jun 19, 2009
I added the reference and the "Imports" line, and I get the folowing error on the line
Code:
Dim oApp As New Excel.Application
Dim oWB As Excel.Workbook = oApp.Workbooks.Add()
Dim oWS As Excel.Worksheet = CType(oWB.Worksheets(1), Excel.Worksheet)
COMException was unhandled
Old format or invalid type library. (Exception from HRESULT: 0x80028018 (TYPE_E_INVDATAREAD))
View 4 Replies
Feb 12, 2010
is there a way of getting the screen coordinates of individual cells on an open Excel sheet, what I want to ultimately do is pass in a cell range say, "A5" into a function and watch the mouse cursor move slowly to that cell. I know this might seem a weird request. I already have a mouse move function but that accepts the x/y coords in pixel terms where excel using .TOP and .LEFT give an entirely different format?
View 1 Replies
May 31, 2010
Ok, what I would like to be able to do seems simple enough. I would like to be able to create an Excel document with a series of columns that contain data to import into Visual Basic 2008
[Code]...
View 1 Replies
Feb 14, 2009
It appears that when one creates an instance of Excel, using CreateObject, (Late binding), the suggested Excel closing function (with GC.collect etc) does not work. I have tried several suggestions, and the only one that works is process.kill method. Do you see any problem in using this? BTW: the reason we are using late binding is that we cannot use Office PIAs....not sure which version of Office would be installed on the client site. We work with O2003, but the client might still be at 2000 or 2002.
View 7 Replies
Jan 25, 2011
I have written an automation addin in Excel with C# (addin.dll). To use the addin, I need to 1. register it using "regasm /codebase c:...addin.dll"2. select in ExcelOptionsAddInsExcel AddinsAutomation the respective addin from the list
I would like to automatize 1) and 2), so that the user just needs to run an exe-file in order to use the addin. 1) should be no problem, but how can one automatize 2)?
View 12 Replies
Apr 20, 2010
Ok basically what I need to do is the following:Read FirstExcelDoc (attached)For every row in that: Retrieve data from sql server db based on info in the Orange columns of FirstExcelDoc Let's say I retrieved data elements A, B, C, D, and E from sql server. Then I need to enter those same data elements A, B, and C in another excel spreadsheet (which has formulas etc) After inputing A, B, and C in that spreadsheet, read a couple of calculated fields and compare those results to data elements D and E retrieved originally from SQL Server DB. Finally, output the results in the Blue columns of the FirstExcelDoc spreadsheet for that row.Loop through and do the same thing for row 2 of the FirstExcelDoc and keep on until you see "END TEST" in the FirstExcelDoc.
I'm looking for a method of doing this efficiently. I have read several articles over the past few days as well as those from Mike R. but just need some direction to get started on this.To start of I'm looking for whether to read the entire FirstExcelDoc spreadsheet or just read the info for first policy number(2nd row) and process it and write out the blue column info for that row and then loop through and come back and read the second policy number (3rd row) etc... Please attach a code snippet for either way of reading the data.
View 19 Replies
Dec 17, 2010
I have been pulling my hair out trying to fix this.
[Code]....
View 1 Replies
Jun 1, 2010
We have a vb program which is run on our server by scheduled task every day. The program opens about 30 excel files, refreshes the data connections, pivot tables and then saves the document in another location.
This may run fine for a couple days but sooner or later the process starts crashing, usually with this error: RPC_E_SERVERFAULT.
My question is, Is it expected that continually opening/closing/refreshing workbooks will inevitably cause the Excel object to crash at some point.
View 3 Replies
Mar 28, 2011
i was wondering if someone could give me the final explanation on what i might be doing wrong here.I spent a lot of time reading around the net and the forum about how to add Threading capabilities to a VB project.
Nos, i've got .NET 4 installed, and i've added the system.tsr and mscorlib.dll files as reference in, say, Excel 2007 (see screenshot).However, when i try to make a thread with anything as basic as "Dim Thread1 As System.Threading.Thread", i get a user-defined type not found error.Indeed, when i use the object browser to see what's in the System file, theres nothing remotely linked to any Threading, and in the mscorlib file, nothing under "Threading" either, just a few Thread related functions, but nothing defining a data type
View 2 Replies
Sep 25, 2009
I'm having an issue where my excel.exe process doesn't close until I close my .net application. I'd like to avoid using Process.Kill() if at all possible.
Code:
Private Sub WriteRowsToXls(ByVal rows As DataRowCollection, ByVal xlsPath As String, ByVal showStatus As Boolean, Optional ByVal AddTotals As Boolean = True)
Dim xlsApp As New Microsoft.Office.Interop.Excel.Application
[CODE]............
This method references a couple of other methods I use for repeated formatting tasks, I'll include those methods below. (I added the FinalReleaseComObject into the other methods after reading Mike's thread but the issue persists)
Code:
Private Sub SetRangeValidation(ByVal rng As Range)
With rng.Validation
.Delete()
[CODE]..............
Method SetRangeAllBorders does about the same as these other methods but my post is too long to add it. The only other things not shown in these code snippets are a few string variable that are defined in the class, studentWS, studentsWSPW, paymentsWS and paymentsWSPW My App creates an instance of the class, loads some data, runs the method above, and then sets the class to nothing. I'm using .NET 3.5 automating Excel 10
View 2 Replies
May 28, 2009
I am developing an application using excel automation.The worst thing is the client's side doesn't have excel installed.What is the solution for this case?
View 17 Replies
Apr 2, 2012
I am doing a bit of Office Automation and when printing a .doc file using VB.NET Office reference DLLs it causes great CPU load so I want to limit those processes to only use a single virtual core. I haven't been able to find anything in Microsoft's documentation about this.
This is the code I am using to print
Dim oWordApp As Word.Application
Dim oTargetDoc As Word.Document
oWordApp = New Word.Application
Select Case SQLdr("Priority")
[Code] .....
View 1 Replies
Oct 6, 2009
I'm trying to upgrade a VB6 app to VB 2008. I have read the article in the tutors corner about automating Excel from VB but I cannot get it to work. Heres what I have done:
1) set a reference to the Microsoft Excel 12.0 Object Library
2) Added "Imports Excel = Microsoft.Office.Interop.Excel" to the top of the module
3) in a routine I have added: Dim X As New Excel.Application Here's where I get an error: Error 75 'Application' is ambiguous in the namespace 'Microsoft.Office.Interop.Excel'.
View 6 Replies
Feb 24, 2012
I am writing a program that loops through all of the sheets in an Excel workbook and saves each sheet as its own workbook. It turned out to be a bit trickier than I expected, since the Sheet.Copy method creates a strange object (see here for the MSDN discussion that I believe is relevant: [URL]. Anyway, I found a Stack Overflow post [URL] that got me to where I am, which is essentially complete, outside of one hanging EXCEL.EXE process that is left after the program completes, which I believe is a result of the sheet.copy method creating a new workbook (potentially a new application as well?). The other thing I run into, which I believe is related to this, is that even though I have my application set to visibility off, when I run the program, excel still opens up and is visible going through the steps.
Here is my code:
Code:
Imports System.Data
Imports System.IO
Imports Microsoft.Office.Interop
[CODE]...
Now I think the problem comes from the end of the loop, where I try to close the export file and the new worksheet it creates:
Code:
'close excel and release com objects
System.Runtime.InteropServices.Marshal.ReleaseComObject(exportsheet)
exportsheet = Nothing
xlApp1.Workbooks(fileNames(counter - 1)).Close(False)
I can't figure out what to do to release the `ComObject` for the new worksheet that is created. I have been trying all sorts of things, but it always throws a COM error when I do it and if I try to define it as nothing (like I do with exportsheet) is says that it is read only by default, so I can't do it. It seems like it should be something as simple as: System.Runtime.InteropServices.Marshal.ReleaseComObject(xlApp1.Workboo ks(fileNames(counter - 1))) But that is not the case. I have tried a few variants of this and I am thinking it has to do with the MSDN link above, but I can't quite sort out what to do. So the code works for my purposes, outside of leaving one EXCEL.EXE after it is done. As far as a test file, I am just using an Excel file with 3 sheets and I put some information on each and change the sheet name, so it is easy to see if it is working or not.
View 1 Replies
Aug 3, 2009
I use the following code snippet
Dim exlapp As New Microsoft.Office.Interop.Excel.Application
Dim xlWorkBook_new As Microsoft.Office.Interop.Excel.Workbook
Dim strOriginal As String
strOriginal = Server.MapPath(Request.ApplicationPath & "/Attachments/") & "abc.xls"
xlWorkBook_new = exlapp.Workbooks.Open(strOriginal)
The code hangs in the last line. It works fine in the development environment. i deployed in windows server 2000 ,where I get this issue. the browser goes half way and throws the below exception after some time
[Code]...
I have set the identity impersonate to true in web config. This should be mostly an access rights issue.I have even provided access rights for the "everyone " user in the excel file and as well for the interop component. Please post ur valuable comments.
View 3 Replies
Jun 15, 2011
We have a VB 2005 program that reads data from a database and builds an Excel output file to be emailed. This works fine from my computer but when we put it on the server it fails on the Excel functionality.
The error is: Unhandled Exception: System.Runtim.InteropServices.COMException
Although Excel is not installed on the server we did also build a Setup program to install our program. It copies the Microsoft.Office.Interop.Excell.dll to the server folder with the exe.I thought the setup program should register the Excel DLL and the program should work even if the server does not have Office or Excel installed.
View 3 Replies
