I have a Excel file and I want to write some code to adjust it. What I want like this: Each cell in column E, if E6 and E9 have the same value, ROW9 should become ROW7 (old ROW7 became ROW8), and then E6 and E7 merged.I knew how to merge cells but I didn't know how change the whole row.
View 2 RepliesI've searched for this everywhere, but can't find a solution after trying for two days. What I want to accomplish is creating a table in Word (n-rows, and 3 cols,) (which I successfully have) and for each row that has a new date, I want to merge all three column cells just for that one row with the date. For every other row, above and below, I still want to preserve the 3 columns structure. What happens with the Merge() method is that all the rows merge, not just the row I'm currently on. I did a macro and noticed that there is a Selection.MoveRight() option I can do, but I can't yet figure out how to put all these statements together to accomplish this. When I do the MoveRight, trying many variants like the following:
oDoc.ActiveWindow.Selection.Tables(1).Range.Cells(wordRowIdx).Select()
oDoc.ActiveWindow.Selection.MoveRight(12)
I get a member cannot be found for the first statement.
Cells.Find(What:="Reaction", After:=ActiveCell, LookIn:=xlValues, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
I've an excel sheet which is populated with thousands of rows of data, is there a way in vb.net I can pick out only selected cells/rows without having to go through every row?
View 2 RepliesI've been aware for some time that the Cells() property is early bound but the Cells.Item() property is late bound. In VBA this all works seamlessly apart from the fact that we lose intellisense in the VBA IDE in the latter case:
Code:
'VBA code
Cells. '<---- we get intellisense
Cells(1). '<---- we do not get intellisense
However, in VB .Net with Option Strict On this means that we have an extra consideration in that we have to explicitly convert to an Excel.Range if we want to set the range reference to a range variable:
Code:
'VB .Net code
Option Strict On
Imports Excel = Microsoft.Office.Interop.Excel
'
'
'
Dim oApp As New Excel.Application
[Code] .....
I'm comfortable enough with this because I'm aware of it and it is trivial to handle by explicitly converting to an Excel.Range. We also had a pretty good discussion about the Cells property a little while back in the VBA board which looked at some of its inner workings. My question is to dig a little bit deeper into the way that this has been implemented. I'm trying to get a better understanding about the reasoning behind the Cells.Item() property returning an Object rather than a Excel.Range?
experience on how to create an engine using C# (VB.NET is okay too) that is generic enough to handle most cases of MS Word text fields I need to fill with data I'm getting from a database? In short, I'm about to embark on this little Office automation excursion and I'm hoping a little bit of feedback here.
View 2 RepliesIt appears that when one creates an instance of Excel, using CreateObject, (Late binding), the suggested Excel closing function (with GC.collect etc) does not work. I have tried several suggestions, and the only one that works is process.kill method. Do you see any problem in using this? BTW: the reason we are using late binding is that we cannot use Office PIAs....not sure which version of Office would be installed on the client site. We work with O2003, but the client might still be at 2000 or 2002.
View 7 RepliesI have written an automation addin in Excel with C# (addin.dll). To use the addin, I need to 1. register it using "regasm /codebase c:...addin.dll"2. select in ExcelOptionsAddInsExcel AddinsAutomation the respective addin from the list
I would like to automatize 1) and 2), so that the user just needs to run an exe-file in order to use the addin. 1) should be no problem, but how can one automatize 2)?
Ok basically what I need to do is the following:Read FirstExcelDoc (attached)For every row in that: Retrieve data from sql server db based on info in the Orange columns of FirstExcelDoc Let's say I retrieved data elements A, B, C, D, and E from sql server. Then I need to enter those same data elements A, B, and C in another excel spreadsheet (which has formulas etc) After inputing A, B, and C in that spreadsheet, read a couple of calculated fields and compare those results to data elements D and E retrieved originally from SQL Server DB. Finally, output the results in the Blue columns of the FirstExcelDoc spreadsheet for that row.Loop through and do the same thing for row 2 of the FirstExcelDoc and keep on until you see "END TEST" in the FirstExcelDoc.
I'm looking for a method of doing this efficiently. I have read several articles over the past few days as well as those from Mike R. but just need some direction to get started on this.To start of I'm looking for whether to read the entire FirstExcelDoc spreadsheet or just read the info for first policy number(2nd row) and process it and write out the blue column info for that row and then loop through and come back and read the second policy number (3rd row) etc... Please attach a code snippet for either way of reading the data.
I'm using excel via interop in application.Sometimes users kill application that created excel instance and that results in excel instance sitting in memory without any chance of disposing it.First I tried to tackle this using ROT(running object table) looks like not all instances of excel are registered there.Than I tried to somehow mark excel process after it is started via interop.[code]This works as long as excel is visible but in my case excel window is invisible.All I need is to somehow mark process that started via automation with the parent PID, so that later I can kill it if parent does not exist.
View 19 RepliesI have successfully automated a PowerPoint Metrics presentation with VB.Net. However, since there were many complicated calculations, it took quite some time to make the 120+ slide presentation - so I recently tried to revamp the application to be multi-threaded.
[Code]...
I've got VS2008 and Office2010, but I don't have Office2007. Therefore, I have the Word14 Object Library but not the Word12 Object Library. Will the code that I create for Office2010 automation also work where clients only have Office2007 or will they have to upgrade their office suites?
View 1 RepliesI have been pulling my hair out trying to fix this.
[Code]....
We have a vb program which is run on our server by scheduled task every day. The program opens about 30 excel files, refreshes the data connections, pivot tables and then saves the document in another location.
This may run fine for a couple days but sooner or later the process starts crashing, usually with this error: RPC_E_SERVERFAULT.
My question is, Is it expected that continually opening/closing/refreshing workbooks will inevitably cause the Excel object to crash at some point.
i was wondering if someone could give me the final explanation on what i might be doing wrong here.I spent a lot of time reading around the net and the forum about how to add Threading capabilities to a VB project.
Nos, i've got .NET 4 installed, and i've added the system.tsr and mscorlib.dll files as reference in, say, Excel 2007 (see screenshot).However, when i try to make a thread with anything as basic as "Dim Thread1 As System.Threading.Thread", i get a user-defined type not found error.Indeed, when i use the object browser to see what's in the System file, theres nothing remotely linked to any Threading, and in the mscorlib file, nothing under "Threading" either, just a few Thread related functions, but nothing defining a data type
I've developed shared addin for Microsoft Word. I distribute this addin with my application and using Inno setup for installation. The Inno setup installs my application and then runs "myAddin.msi" file in order to install addin.
how to uninstall this addin programatically?
Right now, in order to uninstall addin, the user has to to it manually through control panel.
how do i use the webbrowser to display the word or excel docs. just like the pdf viewer... i tried the webrowser1.navigate but it didnot work, if it does its opening a new window, im using office 2010..
View 4 RepliesHow do I use the webbrowser to display the word or excel docs. just like the pdf viewer. I tried the webrowser1.navigate but it didnot work, if it does its opening a new window, I am using office 2010.
View 1 RepliesI've made Add-in for Word 2007 in VS2005.It worked well with Word 2007 and now it works well with Word 2010 32 bit.However it doesn't work with Word 2010 64 bit. The installation is successful, but the ribbon button doesn't show up.
Do you have any experience with add-ins for Office 64 bit?
I'm having an issue where my excel.exe process doesn't close until I close my .net application. I'd like to avoid using Process.Kill() if at all possible.
Code:
Private Sub WriteRowsToXls(ByVal rows As DataRowCollection, ByVal xlsPath As String, ByVal showStatus As Boolean, Optional ByVal AddTotals As Boolean = True)
Dim xlsApp As New Microsoft.Office.Interop.Excel.Application
[CODE]............
This method references a couple of other methods I use for repeated formatting tasks, I'll include those methods below. (I added the FinalReleaseComObject into the other methods after reading Mike's thread but the issue persists)
Code:
Private Sub SetRangeValidation(ByVal rng As Range)
With rng.Validation
.Delete()
[CODE]..............
Method SetRangeAllBorders does about the same as these other methods but my post is too long to add it. The only other things not shown in these code snippets are a few string variable that are defined in the class, studentWS, studentsWSPW, paymentsWS and paymentsWSPW My App creates an instance of the class, loads some data, runs the method above, and then sets the class to nothing. I'm using .NET 3.5 automating Excel 10
I wrote a simple Automation Addin using VB.NET and .NET 4 and want to distribute it's dll to a
computer with xp sp2 and Office 2007 (Excel 2007) without I install .net on that computer, is it
possible?
This might seem a ridiculous question but I just want to make 100% sure before I start committing any funds to software purchases. Can I use VB2008to develop automation routines to control Office2010 applications or must I absolutely use VB2010 to do so?I ask this because I installed an Office 2010 pro on my station which already has VB2008 and I do not have any Word14 reference in the COM section of the list of references...
View 1 RepliesI have used VB.NET and Microsoft Offices Interop to create an application that will run on a server and will print files for different users.My problem is that I need to find a way to impersonate different users so that when MS Word opens and prints, the resulting print job is recorded under that user. I found this link that lets you run .net code as a different user - unfortunately it doesn't work with this code. The username recorded is still the user that is logged on the server.Code Removed by moderator. Any ideas how I can make the Office app I'm automating run under a different user to the .net program that is calling it?
View 2 RepliesI would like to create Shared add-in that works with Word, Excel, Outlook and Power Point. I've found nice article that provides step by step instruction for creating shared add-in for Word: [URL] I've followed instructions and it worked. However, I am looking for a way to create one add-in that works with Word, Excel, Outlook and Power Point, not only Word. I didn't find any reference on the WEB.
View 7 RepliesIs the following grid layout possible with DataGridView in VB.net? Kind of similar to html table layout. I'm adding data cell by cell. However I'm not sure on how to get the layout for Group A & Group B Cells.
-------------------------------------------------|
| Item11 | Item12 | Item13 |
|-----------------------------------------|
| Item21 | Item22 | Item23 |
GroupA |-----------------------------------------|
| Item31 | Item32 | Item33 |
|-----------------------------------------|
| Item41 | Item42 | Item43 |
-------------------------------------------------|
| Item51 | Item52 | Item53 |
|-----------------------------------------|
GroupB | Item61 | Item62 | Item63 |
|-----------------------------------------|
|Item71 | Item72 | Item73 |
-------------------------------------------------|
I want how to merge cells in DataGridView?
View 1 RepliesI have a combobox named month and i have a datagridview and i use acces as datasource to view data in the datagridview
View 2 RepliesI have a datagridview with several column header cells “merged”. I’m using the paint event to achieve the merged effect as shown below.
Private Sub tblEnv_Paint(ByVal sender As Object, ByVal e As PaintEventArgs) Handles tblEnv.Paint
Dim brb As New SolidBrush(tblEnv.ColumnHeadersDefaultCellStyle.BackColor)
[code].....
I have a VB.NET website and I am organizing some data in excel file. I need to merge cells which have same data in excel but everytime I try to this operation, program stops and shows this notification: I don't want to see it and I want program to continue without asking. Is it possible,
View 2 Repliesin datagridview control is there any method to merge the cells across the rows
i need to merge a button column across other rows basing on some cell values
of column 1