Within my PropertyGrid I have decorated a class with the following attributes:
Code:
[Category("Category 1"),
DisplayName("Part Number"),
SortOrderAttribute(1)]
Dim PN1 as String
[Code]...
The problem is that when PN2 is changed in the PropertyGrid, it causes a refresh of all cells. Since both properties have the same DisplayName, but different Categories, the focus is set to PN1 and not PN2 after PN2 is edited.
I am having problem setting focus on specific cell in my Datagridview1 . On Form1 when clicking on cell 3 in any row, I am callig a Dialog1. However, when done working with it, and closing the Dialog1, the focus returns to cell 3 in my Datagridview1 . I like to set the focus on the next cell(4) making it the current cell.
I have tryed :
DataGridView1.SelectionMode = DataGridViewSelectionMode.CellSelect
DataGridView1.CurrentCell = DataGridView1.Item(4, e.RowIndex)
DataGridView1.CurrentCell = DataGridView1.CurrentRow.Cells(4)
And few other things, I am always getting this exception: Operation is not valid because it results in a reentrant call to the SetCurrentCellAddressCore function.
I have a DataGridView with several columns. One column is a TextBox column named "Status". This column can only show one of three values: 'Final', 'Ready', or 'No Reportable'. I want to have some code that would turn the TextBox cell into a ComboBox cell when the user left-clicks on the cell to allow the user to choose one of these three options. When the user clicks elsewhere or the cell loses focus I want the cell to change back to a TextBox cell.
Here is what I have so far, but the code throws an exception indicated below Plus, I don't think the code would remove the combobox when the cell loses focus.
Exception: "Provided cell does not belong to this DataGridView control."
Private Sub dgvCalculatedResults_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles dgvCalculatedResults.MouseDown
Dim ht As DataGridView.HitTestInfo = Me.dgvCalculatedResults.HitTest(e.X, e.Y)
[Code].....
Datagridview . in cell validated handler and I have the column,row for the cell that I just checked on. If the cell contents are bad, I want to force the cell value to be blank and focus back on that particular cell and try again.The code i've tried simply moves to the next cell in the grid instead of staying where I want it to be. Surely there is a command to focus and put the 'cursor' back in a particular cell.Some sample code I'm working with:
MsgBox(
"Invalid Job#, Correct or DIE!")
JLgrid.Item(0, Row).Value =
[code]....
I have a DGV1 and when clicking on cell, I am able to execute a code in: Sub Mouse_Click()
If DataGridView1.CurrentCells(4).Selected = True then
Label1.Show()
End If
End Sub
I like to do the same thing using Tab key when a cell in my DGV1 gets focus or the Tab enters a cell. Could someone show me which Sub I need to use.
I am using a datagridview as an input device. I am using a subroutine to check for errors. When an error is found is there a way to set the focus to the specific cell in the datagridview where the erro has occurred?
View 3 RepliesI have a datagridview that I have put a ContextMenuStrip1 on. I would like it to remove a row in the datagridview when the row is right clicked on and they click on "delete row". I have the delete working and the menu is showing up but this isn't firing when you right click on the datagridview.
This is where I am setting the row to edit:
Private Sub ModifyRowToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ModifyRowToolStripMenuItem.Click
If Not datagridview_TagAssignment.CurrentRow Is Nothing Then
[Code] .....
I am always ending up on row(0) and never the row I right clicked on.
Private Sub datagridview_TagAssignment_CellMouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellMouseEventArgs) Handles datagridview_TagAssignment.CellMouseClick
If e.Button = Windows.Forms.MouseButtons.Right AndAlso e.RowIndex >= 0 Then
datagridview_TagAssignment.Rows(e.RowIndex).Selected = True
End If
End Sub
I have a custom datagridview. I have to set focus to the cell(0,0) of that datagridview when it got focus.I have tryed the following code:
Me.CustomDataGridView1.CurrentCell = Me.CustomDataGridView1(0,0)
in the GotFocus event of that datagridview.But when i run and try to enter some text in a cell, then press the DOWN button to go to the next cell but there is a NullReferenceException.
I can Highlight the row in a datagridview. If I don't scroll down a few hundred rows. I will not see it highlighted. How can I automatically scroll to the highlighted row?[code]...
View 1 Repliesvs 2005 sql 2005 developer/I have a datagridview with 4 columns .I want the user to be able to use the arrow keys to move through the rows and just two of the columns.I want the other two rows to behave like a label that cannot get the focus. Nor be selected.I have been messing arround with the "cell enter" event but the language wont let me set the selected cell from within that routine.
View 4 RepliesIs there any way to remove the focus from the current cell after edit when I click the row header? I have tried various methods; repainting the row, cell, moving focus to other cell but the caret still remains in that cell.
View 6 Repliesi have 5 columns in a datagridview
when i enter 0 and press enter in the 1st column then i want focus(select) to the 4th cell of that row otherwise i want to focus the next cell.
I am trying to set the focus in a datagridview's cell after the user enters some data and tries to tab out of the cell. I can't seem to get the focus in the cell they just edited. I can change the background color, but the focus goes to the next field in the grid. I am trying to do this in the _CellValidating event. Here is my code :
Private Sub dgvFish_CellValidating(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellValidatingEventArgs) Handles dgvFish.CellValidating
[Code]....
The function CheckSampleNumber() takes the value of the cell just entered, and checks to see if it has been entered either in the current grid, OR in the database.
Setting Focus in particular cell of a datagrid
I have two datagrids in my form. I want to set focus to the particular cell of that datagrid. Result of one datagrid is to be displayed in the other one.
I am having trouble setting the focus to a particular cell in datagridview.
I have a timetable and on initialisation of the program, it compares the time in the datagridview with the current time. If the time has passed, the row is displayed in grey, if not then it is shown in black. I then want to scroll through the datagridview to focus on the first black line.
Here is the
-----------------------------------------------------------
Private Sub DataGridView1_CellFormatting(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellFormattingEventArgs) Handles DataGridView1.CellFormatting
[Code]....
"An unhandled exception of type 'System.StackOverflowException' occurred in mscorlib.dll" with the note about infinite recursion.
What have I done wrong and how do I scroll through to automatically set the focus?
Is it possible to put the focus on a certain cell on the new row in a datagradview.
So when I add the row I can inmediately start typing?
do I focus back from a cell if its validation fails?With CellValidating event, if I set e.Cancel=True it prevents my cell from leaving.
View 4 RepliesI have a bound DataGridView where the user should enter an item number in one cell, the name of this item will be displayed in the next cell, and depending upon variables of this item number, the focus should be set to the correct cell on the same row.
My problem is that I can not seem to get the focus to the correct cell.
My code so far. I am having problems with the marked line:
Private Sub dgvOrdreregistrering_CellEndEdit(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles dgvOrdreregistrering.CellEndEdit
[Code].....
restrict users from setting focus to a specific datagridview cell in vb.net
View 8 RepliesI am attempting to copy the value of the TimeStamp in cell A6 which has the NOW() formula into cell A5 Based on a change in Cell A4. The catch is I don't want it to update every time the sheet is recalculated due to updating links in other cells on the sheet. ONLY when Cell A4 Changes. What do I do?
View 2 RepliesIs there a more efficient/easier way changing the backcolor of a control when it has focus and lost focus? Let's say I've got 10 text boxes. Right now I would have 20 different events...10 for Enter event and 10 for Leave event. Of course, entering would change the back color to "green" and leaving would change it back to "white".
[Code]....
Here is what I've done:1) Created an Excel COM add-in for Excel 20032) Added a NotifyIcon to the Windows taskbar notification area (aka system tray) during ThisAddIn_Startup3) Added a ContextMenuStrip with a ToolStripButton to the NotifyIconWhy is it when I right click on the NotifyIcon, Excel gains focus? If after clicking on the NotifyIcon to display the ContextMenuStrip I choose not select an option on the ContextMenuStrip and instead click back on the Excel window, I get a weird flashing cell in Excel.I've created a video of the problem to help you see what I [url] anyone know how to prevent this? Ideally, I'd like to be able to click back on Excel and only have the ContextMenuStrip close and Excel regain focus.
View 1 RepliesI have two forms in an application. One is he background and then I show another keypad form called with the show() method (not showDialog) because I need to perform some validations on btn click.
The kepad has 10 buttons and an Enter Button. The problem is that the form keeps loosing focus (I checked this with a messagebox which keeps poping up once for focus=true and again for focus=false, it continuously keeps losing and gaining focus) so it does not process any keypress events untill i click somewhere on the form. I tried using me.focus() in form load event but to no avail. The forms TopMost property is also set to true.
I need to create kind of a menu in my application in wich I have to set different parameters before I populate a Datagridview with some values.So, the idea is to use a PropertyGris in which from which I can edit some parameters and after that I run a query (with parameters setted by PropertyGrid) tu populate my DGV.For example I create some properties like NAME OF A PROJECT, ID OF PROJECT, RESPONSABLE, etc and I put this properties in a propertyGrid and than the user can interact with the propertyGrid and set value for each parameter, bfore running the query for populating
View 3 Repliesi'm hoping to use a propertygrid in one of my programs.
1/ i'm having difficulty writing a (text) property that will open a multiline editor like the textbox text property in the vb properties window. how would i do that?
2/ i need a way to make either selected properties or preferably entire categories disabled or enabled at runtime.
3/ how can i turn off automatic sorting so my categories + the items they contain are displayed in the order they are in my class?
Imports System.ComponentModel
Imports System.Drawing.Design
Imports System.Text.RegularExpressions
[code]....
I want to add a new PropertyGrid control every time an item is added to a ListBox.I have a ListBox, with an "Add Item" button underneath (and also a "Remove Item" button). Every time an item is added to the list, I want to create a new PropertyGrid corresponding to each item. The relevent PropertyGrid should appear when an item is selected in the ListBox, and the user can edit the properties of that item.
The only way I can think of doing this is by creating a dynamic array which has length ListBox1.items.count, but I'm not sure it's possible to create an array of controls.
How to dynamically add Datasource Property in propertygrid in vb.net?
View 1 RepliesPropertyGrid is only scrollig correctly when I place it on a Windows Form, but does not work when it's docked in a SplitContainer Panel. Only the vertical scroll bar is needed for my application. The vertical scroll bar displays correcly and you can move it up and down okay, but the contents of the PropertyGrid (while correct) do not scroll up and down with it. I'm using Visual Studio 2005 Professional Version 8 with .NET Framework 2.0 and coding in Visual Basic. Has anyone found a way around this?
View 1 RepliesIn my propertygrid having one custom property ..suppose some text is there in this item.i want user to allow only delete the item.nothing more like editing ,backspace nothing..only provide delete key option to this property item..
View 4 RepliesI would like to display a PropertyGrid on a form at runtime to simplify some testing that I am doing. I have it working except that the PropertyGrid does not pickup any extender provider properties (eg ToolTip). How do I make it aware of any extender providers also?
View 4 Replies