Reading And Writing A Text File?

Nov 23, 2011

how to read and write a text file in vb.net

View 7 Replies


ADVERTISEMENT

Text File Reading/Writing By Row?

Mar 28, 2010

How would a person read a line of a text file by the number of the line. In other words, if I wanted to get the 3rd line of the file, how could I store that third line in a variable. While I'm at it, I might as well also ask how to do the opposite, or write text to a specific line (in this case, writing over the other information on the chosen line).

View 2 Replies

Reading / Parsing / Writing A Text File?

Oct 7, 2009

I'm using visual basic 2008 express to do some simple stuff. For this project, Im reading in one large text file.The top of each page has a header section that is always the same, except sometimes a dept# changes, signifying a new set of data.The first line always has the text "RunDate", so when I read that, I know that I'm at the top of the first page.After reading the first line, I'd like to immediately go to the sixth line and grab that dept# and store it.dept = left(trim(myline,7)(Its always 7 characters long) so I know what dept I'm working on.I'll then loop through and write each line to a new text file, until I hit the top of a new page.At that point I need to look at line 6 again. if the dept # is the same, I'll keep writing to the same file.Reading and re-writing from the text files is easy, I just loop through line by line, but I need to be able to jump down to the 6th line, and I don't know how to do that without reading each line to that point"

View 2 Replies

Reading And Writing Data To A Text File?

Sep 28, 2009

The program that I am writing has three default variables that I would like it to store and also be able to change. I have them in a text file called "settings.txt" The format of the text file is as follows:

Default Source "I:DCIM101MSDCF"
Default Destination "C:Documents and SettingsChristyMy DocumentsMy Pictures"
Default Backup Destination "D:My DocumentsBackupMy Pictures"

The field descriptions eg "Default Source" take up 30 characters, so the variable data starts with character 30. I know their has to be an easy way just to pull out the data from a particular line starting with character 30 but I can't find it.

View 6 Replies

Reading And Writing Lines To And From .text File?

Mar 25, 2012

I'm writing a program where there are text boxes and the user can enter info and append them to a text file as well as read from the text file and view the various entries in it. The problems I'm running into are that I have a button that opens an open file dialog box allowing you to select the file, and I want to get it to open the first entry of that file in the correct text boxes. the code so far looks like this

code:

I used to have this bit of code in there but there was a conflict with the .txt file being used more than once at the same time while it was in there.

code:

Im also having trouble writing to the file and I'm not sure why. I have an "Append" button that has this code in it

code:

and it comes up with the issue "object reference not set to to an object instance".

View 6 Replies

Reading, Comparing And Writing To Text File?

Aug 18, 2009

I have a 2 text files

Text file 1:
.ERR - Max6 Error file
[2 19.40 44.7] X6.950 Y-4.705 106.522, 222.048
Open -106.522, 222.048
[2 05.52 39.6] X7.720 Y5.010 214.550, 205.048, 101.078

[code]....

But it not writing anything as output..

View 1 Replies

Reading, Matching And Writing To Text File?

Aug 18, 2009

I have a 3 text files

Text file 1:
.ERR - Max6 Error file

[2 19.40 44.7] X6.950 Y-4.705 106.522, 222.048
Open [code]....

From here i have to read the Node name which is MEM_B_DQ7.Then match node name with third file and get that node name group

Text file 3
NODE MEM_B_DQ7
PINS

View 1 Replies

Reading,Comparing And Writing To Text File?

Aug 17, 2009

I have a 2 text files

Text file 1:ERR - Max6 Error file

[2 19.40 44.7] X6.950 Y-4.705 106.522, 222.048 Open -106.522, 222.048
[2 05.52 39.6] X7.720 Y5.010 214.550, 205.048, 101.078 Open -214.550, 101.078

[2 07.69 39.2] X7.786 Y3.489 215.574, 214.075, 204.067

[Code]...

View 7 Replies

VS 2008 Writing And Reading Text From File?

Nov 11, 2011

This is what i wanna do and dont really know how:

When i click button "StoreX":
if X.ini does not exist it will be created at the same folder as application
NumericUpDown1 value stored at X.ini line 1

[code]....

View 21 Replies

VS 2010 Reading And Writing To Text File?

Dec 3, 2011

Their is a problem whenever I want to write something to a text file. Please see the attatchement to see what happens when I'm debugging. I've put the code for writing to file right at the end of the program.Here is some of the code which shows how the program writes to and reads from the file:

Option Explicit On
'Force all variables to be declared.
Imports System.IO

[code].....

View 2 Replies

VS 2010 Text File Reading And Writing?

Jul 18, 2010

I have just recently been using VB 2010 after using VB5. I have noticed a lot of changes. The problem I have is that I wish to open and save text files to and from arrays in the background. I've attached what I would do in VB5. I have searched around, but all the examples I find use a Textbox instead of an array. Can anyone show me how I can do this with VB 2010?

View 3 Replies

Accessing A Text File For Reading And Writing At The Same Time?

Mar 1, 2011

(First off all hi to everyone my first post!) Ok, i have two programs one program writes to a text file on a consistent basis, while the second program is opening this text file on a consistent basis for reading.. Sometimes the programs are accessing the file at the same time and the user keeps getting this error : this process cannot access the file because its already in use..

Is there any class, in system.io that i can use to modify the settings of this text file so both programs can access it at the same time?

View 2 Replies

Reading And Writing A Text File That Is Saved As A Resource?

Jun 17, 2010

I would like to know how to write to a text file that is added to resources and then have it show the contents in a text box.But I would like to have it on a timer so every second it will refresh as I am trying to make an instant chat program.Also I would like to note that I want it to delete everything after all the users have closed the program. Is there any way to make it so the text file is empty when there is no body using the program any more?

Public Class Form1
Private Sub btnSend_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSend.Click

[code].....

View 10 Replies

Reading And Writing Text File Data With Arrays?

May 3, 2009

Even a primer on just reading/writing to a text file would be golden. The array confuses me further, but understanding the data is primary.

Basically, we're writing a program to manage inventory for a bar. Fields and a few lines are below. The delimiter is "||"

So... How do we read the data into the arrays? NAME would be strName(), etc for all of them.

how to write and update existing data.

UID||BREWERY||NAME||SIZE||FORMAT||SEASONAL||PRICE||CASECOST||CASEQTY||BREWERYLOCATION||BREWSTYLE||ST YLE||ABV||CLASS
A0101.12B||Abita Brewing Company||Abita Amber||12

[Code].....

View 2 Replies

Reading/Writing Specific Lines Of A Text File?

Apr 21, 2009

I'm trying to create a program that stores a users stats for their character (for something like an RPG). I know how to write more than one line in a text file, but I want to learn how to read and write text on specific lines of my file. I know that you can just read each new line individually in order using a StreamReader, such as

username.text = readLine.ReadLine()
userage.text = readline.ReadLine()

[Code]....

This is good for just displaying the stats and changing them from a constant interface, but I'm afraid that eventually I'll need to read/write specific lines, like reading the fourth line which might specify magic level, or writing a new money amount.

View 4 Replies

Reading And Writing Specfic Line Form A Text File?

Aug 5, 2011

I have the same problem that Niphoet had in this thread: vb .net overwrite a specific line in a text file

I am trying to implement the code that Axarydax showed in C# that I am trying to translate to use into vb.net. My problem is that the code will make my new text file but will not write any of the lines from the other text file to it and just leaves it blank. I think my problem is with the while loop statement but I am not sure.

[Code]...

View 1 Replies

File I/O And Registry :: Text File Reading And Writing?

Jul 17, 2010

I have just recently been using VB 2010 after using VB5. I have noticed a lot of changes. The problem I have is that I wish to open and save text files to and from arrays in the background. I've attached what I would do in VB5. I have searched around, but all the examples I find use a Textbox instead of an array. Can anyone show me how I can do this with VB 2010?

View 1 Replies

Reading From And Writing To Text Files?

Mar 11, 2010

Input File to read:
SAMPLE NO: 10S-02013
Moisture 10.1

[Code]....

I am not getting the right output I need, as whenever it reads a line, it looses my sample numeber.

View 8 Replies

Reading/writing Text Files?

Mar 3, 2009

so i have it so that the user input three initials and presses an enter button. Then it goes into a listbox where theusers initials and game score enter. I then have it transfer to a text file. all this works but i need some code toun through the text file and arrange them from highest to lowestheres my current "HighScore" codei know its going to be a for loop but im a beginner in vb and it would be so much easier in java button1 is the enter buttonbutton2 is the save button that saves to a text file

Imports System.IO
Public Class HighScore
Dim objStreamWriter As StreamWriter

[code]......

View 5 Replies

Reading/Writing Website Text?

Jul 8, 2009

How do I make it read a text and write down file.

</script><span id="numbers">Random Number: 15</span><script type="text/javascript">

I can't really explain it but is like is reading "numbers" text.

View 8 Replies

Text Files Reading Writing Resources

Jul 30, 2009

I am witting an app that will generate batch files to do an unattended installation of a share point 2007 farm. I already have a batch file I use and it's pretty big. I copied and pasted the content into my application, and I'm using the System.IO.StreamWriter to write to the batch file from the winform. [code]As you can probably guess, I'm doing all of this in my mainform code window. There are maybe 3 or 4 batch files that will be generated based on the selections made on the form. For example, I'm generating a batch file to create the OU, Group and service accounts the farm will use in active directory, I'm creating a batch file for all of the variables that will be used for the additional batch files created, etc. How can I split this up? is there a way to create the batch files without having to actually copy, paste my existing batch file content into the mainform code window? I'm using file.writeline on each line of the pasted content by the way.

View 7 Replies

VS 2010 Reading/Writing Text Files?

Oct 12, 2011

I have seen a few different ways of Reading/Writing Text files. What i am trying to achieve is a simple debug file in the most efficient way possible. Currently I have....

If System.IO.File.Exists(debugpath) = True Then
Dim Debugwriter As New System.IO.StreamWriter(debugpath, True)
Debugwriter.WriteLine(debugwrite)
Debugwriter.Close()

[code]....

1. Do I have to close and reopen the file each time I want to write to it.

2. In vbscript I would simply open the the file at the start of the script and close at the end is the same possible here.

View 3 Replies

Reading And Writing To A Txt File

Jun 27, 2011

I have a tab spaced txt file that looks somthing like this;

[Code]...

I'd like to be able to read in the file and have a pop up message ask somthing like this; "Is cash1 for comp1 correct?" If yes ask about the 2nd line and if not ask what the real cash total is and then over write that to the file, then ask about the 2nd line.

View 2 Replies

Reading And Writing To Csv File?

Dec 31, 2010

i am working on a Yahtzee projeect for college and am struggling with reading and writing to a csv file the code i have to read the file works but only gets the first column and displays it on a line not as a list.

Private Sub HighScoreFrm_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load

[Code]....

the other criteria i have to work towards and wondering if anyone can help is to limit the amount of records to 10 so need to check what the lowest score is and if the current score is higher over write it,

View 5 Replies

Writing And Reading File

Aug 7, 2009

I have created a small game for my son and after each game it tells him his score.all I want is to write the highscore to a file and have it open each time he begins a game..so he can see what his last score was. I dabbled with all this Io.file stuff and I just can not seem to get it to write to the file..also how do I work with app path in this case? I mean when the game is done and installed the current path of the save text would change.

View 6 Replies

Diary Program - Reading, Writing Text Files?

Jan 23, 2012

i have started programming a diary sort of program. i have a home form which takes you to other features. im not sure if there is an easier way to do this but the view is week by week with a new week on a new form. and on each form i have a separate text box for each day. using the code:

'In the form load event:
txtMonday.Text = My.Computer.FileSystem.ReadAllText("DayMonth.txt")
'In the text-changed & form closing event:
My.Computer.FileSystem.WriteAllText("DayMonth.txt",
Monday.Text, False)

View 5 Replies

Increase Speed Of Reading And Writing Text Files?

Sep 1, 2009

I have created a code in VB.NET to read data from text files. Data is read from a list of files, where each file is changed using a for loop. Data is written to a new text files. Each file is read one by one and written in the same way. Now, my speed of execution is very slow. I am using a Quadcore processor with only 20-30% of CPU utilization when my code runs. Is there anyway I can increase the speed of reading and writing? To read only 125 files it takes 10 minutes or more, which is very slow indeed, because in the end I need to read thousands of files and write them. Each file is approxiamately 30-50kb.

Here is my code.

Public Sub ReadRMRDataFileIntoTextFiles()
'Read in the customerids once up front
Dim customerids As Collections.Generic.List(Of String)

[Code].....

View 5 Replies

File Reading And Writing Methods?

Mar 15, 2011

I'm trying to write a program that will read a text file, and sort of filter out some things into some new files for myself. I have a website that I like to put information such as Artists, and songs for music. My website writes the Artist, and Song I input to one file on a new line in the format of (Artist - Song). The problem is it's gotten massive! I want to start organizing my artists, and songs anyway I come up with but I don't even know where to begin. To narrow it down I want to go into the file grab the artists name before the (-) and then write it to one file. After that I want to write everything after the (-) which is the songs to a different file. What file reading, and writing method should I use? As you might be able to tell I'm quite the noob.

View 7 Replies

File Writing And Reading Into List Box?

Apr 4, 2009

I have Strings writen to a file.

But i then want VB to read the file, and input ALL the strings in that file into a ListBox.

View 1 Replies

Reading And Writing To A File In Binary?

Dec 20, 2010

few weeks ago i heard my teacher say that it is possible to view any file as a binary array (1s and 0s). if this is possible to do in visual basic please let me know how. Also how would i go about writing an array of binary to a file? For example 01100001 in a .txt file would produce "a"

View 4 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved