Their is a problem whenever I want to write something to a text file. Please see the attatchement to see what happens when I'm debugging. I've put the code for writing to file right at the end of the program.Here is some of the code which shows how the program writes to and reads from the file:
Option Explicit On
'Force all variables to be declared.
Imports System.IO
[code].....
I have just recently been using VB 2010 after using VB5. I have noticed a lot of changes. The problem I have is that I wish to open and save text files to and from arrays in the background. I've attached what I would do in VB5. I have searched around, but all the examples I find use a Textbox instead of an array. Can anyone show me how I can do this with VB 2010?
View 3 RepliesI have seen a few different ways of Reading/Writing Text files. What i am trying to achieve is a simple debug file in the most efficient way possible. Currently I have....
If System.IO.File.Exists(debugpath) = True Then
Dim Debugwriter As New System.IO.StreamWriter(debugpath, True)
Debugwriter.WriteLine(debugwrite)
Debugwriter.Close()
[code]....
1. Do I have to close and reopen the file each time I want to write to it.
2. In vbscript I would simply open the the file at the start of the script and close at the end is the same possible here.
how to read and write a text file in vb.net
View 7 RepliesHow would a person read a line of a text file by the number of the line. In other words, if I wanted to get the 3rd line of the file, how could I store that third line in a variable. While I'm at it, I might as well also ask how to do the opposite, or write text to a specific line (in this case, writing over the other information on the chosen line).
View 2 RepliesI'm using visual basic 2008 express to do some simple stuff. For this project, Im reading in one large text file.The top of each page has a header section that is always the same, except sometimes a dept# changes, signifying a new set of data.The first line always has the text "RunDate", so when I read that, I know that I'm at the top of the first page.After reading the first line, I'd like to immediately go to the sixth line and grab that dept# and store it.dept = left(trim(myline,7)(Its always 7 characters long) so I know what dept I'm working on.I'll then loop through and write each line to a new text file, until I hit the top of a new page.At that point I need to look at line 6 again. if the dept # is the same, I'll keep writing to the same file.Reading and re-writing from the text files is easy, I just loop through line by line, but I need to be able to jump down to the 6th line, and I don't know how to do that without reading each line to that point"
View 2 RepliesThe program that I am writing has three default variables that I would like it to store and also be able to change. I have them in a text file called "settings.txt" The format of the text file is as follows:
Default Source "I:DCIM101MSDCF"
Default Destination "C:Documents and SettingsChristyMy DocumentsMy Pictures"
Default Backup Destination "D:My DocumentsBackupMy Pictures"
The field descriptions eg "Default Source" take up 30 characters, so the variable data starts with character 30. I know their has to be an easy way just to pull out the data from a particular line starting with character 30 but I can't find it.
I'm writing a program where there are text boxes and the user can enter info and append them to a text file as well as read from the text file and view the various entries in it. The problems I'm running into are that I have a button that opens an open file dialog box allowing you to select the file, and I want to get it to open the first entry of that file in the correct text boxes. the code so far looks like this
code:
I used to have this bit of code in there but there was a conflict with the .txt file being used more than once at the same time while it was in there.
code:
Im also having trouble writing to the file and I'm not sure why. I have an "Append" button that has this code in it
code:
and it comes up with the issue "object reference not set to to an object instance".
I have a 2 text files
Text file 1:
.ERR - Max6 Error file
[2 19.40 44.7] X6.950 Y-4.705 106.522, 222.048
Open -106.522, 222.048
[2 05.52 39.6] X7.720 Y5.010 214.550, 205.048, 101.078
[code]....
But it not writing anything as output..
I have a 3 text files
Text file 1:
.ERR - Max6 Error file
[2 19.40 44.7] X6.950 Y-4.705 106.522, 222.048
Open [code]....
From here i have to read the Node name which is MEM_B_DQ7.Then match node name with third file and get that node name group
Text file 3
NODE MEM_B_DQ7
PINS
I have a 2 text files
Text file 1:ERR - Max6 Error file
[2 19.40 44.7] X6.950 Y-4.705 106.522, 222.048 Open -106.522, 222.048
[2 05.52 39.6] X7.720 Y5.010 214.550, 205.048, 101.078 Open -214.550, 101.078
[2 07.69 39.2] X7.786 Y3.489 215.574, 214.075, 204.067
[Code]...
This is what i wanna do and dont really know how:
When i click button "StoreX":
if X.ini does not exist it will be created at the same folder as application
NumericUpDown1 value stored at X.ini line 1
[code]....
(First off all hi to everyone my first post!) Ok, i have two programs one program writes to a text file on a consistent basis, while the second program is opening this text file on a consistent basis for reading.. Sometimes the programs are accessing the file at the same time and the user keeps getting this error : this process cannot access the file because its already in use..
Is there any class, in system.io that i can use to modify the settings of this text file so both programs can access it at the same time?
I would like to know how to write to a text file that is added to resources and then have it show the contents in a text box.But I would like to have it on a timer so every second it will refresh as I am trying to make an instant chat program.Also I would like to note that I want it to delete everything after all the users have closed the program. Is there any way to make it so the text file is empty when there is no body using the program any more?
Public Class Form1
Private Sub btnSend_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSend.Click
[code].....
Even a primer on just reading/writing to a text file would be golden. The array confuses me further, but understanding the data is primary.
Basically, we're writing a program to manage inventory for a bar. Fields and a few lines are below. The delimiter is "||"
So... How do we read the data into the arrays? NAME would be strName(), etc for all of them.
how to write and update existing data.
UID||BREWERY||NAME||SIZE||FORMAT||SEASONAL||PRICE||CASECOST||CASEQTY||BREWERYLOCATION||BREWSTYLE||ST YLE||ABV||CLASS
A0101.12B||Abita Brewing Company||Abita Amber||12
[Code].....
I'm trying to create a program that stores a users stats for their character (for something like an RPG). I know how to write more than one line in a text file, but I want to learn how to read and write text on specific lines of my file. I know that you can just read each new line individually in order using a StreamReader, such as
username.text = readLine.ReadLine()
userage.text = readline.ReadLine()
[Code]....
This is good for just displaying the stats and changing them from a constant interface, but I'm afraid that eventually I'll need to read/write specific lines, like reading the fourth line which might specify magic level, or writing a new money amount.
I can write a 1-d string array to file with:
Dim test() As String = {1, 2, 3, 4, 5}
File.WriteAllLines("C:MyFile.txt", test)
but can't see how to write a 2-d array to file.
I've tried this:
Dim test(,) As String = {{1, 2, 3, 4, 5}, {34, 22, 12, 33, 55}}
Dim myfile = File.CreateText("C:MyFile.txt")
Dim row, col As Integer
[Code].....
I have the same problem that Niphoet had in this thread: vb .net overwrite a specific line in a text file
I am trying to implement the code that Axarydax showed in C# that I am trying to translate to use into vb.net. My problem is that the code will make my new text file but will not write any of the lines from the other text file to it and just leaves it blank. I think my problem is with the while loop statement but I am not sure.
[Code]...
I have just recently been using VB 2010 after using VB5. I have noticed a lot of changes. The problem I have is that I wish to open and save text files to and from arrays in the background. I've attached what I would do in VB5. I have searched around, but all the examples I find use a Textbox instead of an array. Can anyone show me how I can do this with VB 2010?
View 1 Replieslock from reading/writing/copying a loaded XML file with XDocument.Load [VB 2010]?
View 1 RepliesI want to create a little program with textboxes in it, that writes the contents of these textboxes to a file. It also needs to write some predefined lines to the files, even on the same line as where the contents of the textbox is.
Heres an example:
The file should look like this when you open it in notepad:
^1::
Send t Text from TextBox {Enter}
First I think I would need to do this:
Dim ioFile As New StreamWriter("scripting.ahk")
ioFile.WriteLine("^1::")
If I do the above it works.. But how can I write another line where the "Send t" and "{Enter}" gets written automaticly before and after the contents from the Textbox?
I am working with the formula for writing information to a text file. I have a program with 4 text box's and 5 radio buttons. I need to the program to write all of the info from the 4 text box's that the user has entered and the radio button that the user has selected.
View 5 Repliesbasically what I am trying to do is perform a loop that will write the input from an inputbox into the .txt file. My loop doesnt seem to be working,
[Code]...
I'm outputting a number of variables to a text file and each field needs to be in a specific place.For example:I have a string that is varying in length, but will never be more than 5 characters. The string has to end on the 8th character of the line. Is there a way to write the string to ensure that the string ends at a specific place on the line, regardless of the length?
View 4 RepliesInput File to read:
SAMPLE NO: 10S-02013
Moisture 10.1
[Code]....
I am not getting the right output I need, as whenever it reads a line, it looses my sample numeber.
so i have it so that the user input three initials and presses an enter button. Then it goes into a listbox where theusers initials and game score enter. I then have it transfer to a text file. all this works but i need some code toun through the text file and arrange them from highest to lowestheres my current "HighScore" codei know its going to be a for loop but im a beginner in vb and it would be so much easier in java button1 is the enter buttonbutton2 is the save button that saves to a text file
Imports System.IO
Public Class HighScore
Dim objStreamWriter As StreamWriter
[code]......
How do I make it read a text and write down file.
</script><span id="numbers">Random Number: 15</span><script type="text/javascript">
I can't really explain it but is like is reading "numbers" text.
I am trying to search for snippet for reading and writing ini files in visual basic .net.
View 3 RepliesMy app has a series of parameters that is to be stored in an external files. Eventhough the "parameter" file could be edited by the end user, I really don't care that much about what the user does to them.
So my two questions are, what is the most effeicent means of reading and writing a file and in what format should the file be in? When I say effeicent I mean, what utilizes the least amount of memory during the process, is fast, and disposable.
Example: XML, Text, something else. StreamReader / StreamWriter or what ever.
I have a text document with the content:
[Code]....
Now, I want to put the "1.hi" in a TextBox1 and "2. all" TextBox2 and the "3.lol" IN TextBox3 and finally the "4.blabla" in the TextBox4 Just split the document into text boxes.