Reading Text File And Assign Value To The Variable?
Mar 1, 2010
I have a text file. It has the following content.
5.000000 tEND =
1.0305644E-03 t_exposure=
32.50000 T_hfg=
20.50941 Temperature
-0.5424923 Heat flux
15.39559 impinging temperature
I have to read each line and assign the value to the variable in vb.net. for example i will declare tend, t_exposure, T_hfg, Tem, Heatflux as single in vb.net. Then I should read the file and assign
I have the following code: Public Sub SearchText(ByVal SearchFile As String, ByVal stSearchTerm As String) ''search loaded book stSearchTerm = Me.txtSearch.Text For Each Line As String In File.ReadAllLines(Path.Combine(Application.StartupPath, "BooksKJVOTGenesisBookOFGenesis.txt")) SearchResults.rtbSearchResults.Find(stSearch, 0, RichTextBoxFinds.MatchCase And RichTextBoxFinds.WholeWord)
I have an application that gets executed on a windows mobile device using RAPI that outputs the current device type, rom version, and wireless driver version etc.. to a .txt file on the device.My plan is to then pull .txt file over activesync to my pc and then open it up and assign each of those attributes into variables in my application.
sir, i have no idea how the code will look, but i want it to assign a value after reading from a text file and then store it for further use even if the text file is not there, but without using any external storage like registry, disk, ram. It should store the value in itself and do like this:-
dim variable1, variable2 as string if file.exists("text.txt") read the text
Trying to read in three variables per line from a text file that looks similar to the first code segment. What we've been taught so far to read in is something similar to the second segment. And it works all and good for single words per line.
If this was C++ I'm pretty sure I could getline and use the comma as a terminator, but I'm not sure if a similar function exists for VB.
Bacon, 15.95, In stock Stuff, 3044, warehouse Something here, 84444, end of the road
Here is what I'm trying to do: When Button1 is clicked, I want an Excel file created and saved into a default folder (the user does not choose the folder...code for Button1_Click will choose the folder), and the file name will be the text that the user enters into TextBox1.
i have this error in the line of with xl.active......Object variable or With block variable not set.
Dim xl As Object xl = CreateObject("Excel.Application") With xl.ActiveSheet.QueryTables.Add(Connection:= _ "TEXT;C:Documents and SettingsUserDesktop429MEDICA2.TXT", _ Destination:=xl.Range("$A$1"))
I am working on a project in VB 2008 and need it to do this:Read first line from text file (using Openfile)Enter line into textbox on formDo some other codeThen Read second linefrom text fileEnter line into same text boxand loop until we have gone through text fileI am not sure how to read line by line from text file then enter it in textbox. I can open the Openfile and get the filename and everything, but I just am not sure how to read from it or enter that line into the textbox.Here is what I have, its not much but its a start:
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click Dim FileReader As StreamReader
I've been writing a weight program for flooded pressure vessels and I'm having trouble retrieving the data from the text files I've been saving. I know how to write the data to the text file, but retrieving it with OpenFileDialog is not so easy for me.The user has individual text boxes that they input strings or numbers into and when they save the file, each text box input is written to one line in the text file. For example, the first text box is for the username, therefore the first line of text that is saved is the person's name, the second text box is the customer, thus the second line in the text file is the customer name, and so on.
(Actually, the first line of text in the saved file designates whether English units were used or Metric units because when the user retrieves the saved file, English units will open one form and Metric units will open a separate form, so some If...Then statement will need to occur).I need to be able to read the first line, have either my "EnglishForm"form open or my "MetricForm" form open, and then have each subsequent line of text be displayed in their corresponding text boxes. I know I need to use ReadLine or LineInput, but I don't have a clue what to do.Assuming the syntax I've displayed below would just magically work (if only life were that easy), it would look something like this
If FirstLineOfTextInFile = "English" Then EnglishForm.Show() ElseIf FirstLineOfTextInFile = "Metric" Then[code]....
And so on...I read a lot of articles from the MSDN library and exhausted each link that I've looked through from Google and Bing, but most only retrieve data from the file to a single text box through some loop or streamreader and don't take into account multiple forms.
I want to split each line at the comma and write the left side to a textbox and the the right side to another textbox. I'm close, with the code below, but I can only post results from the first line in the file. How do I loop this and append the text results in each of the textboxes.
Dim TempFile As String TempFile = "temp.txt" Dim sw As StreamWriter
I've been making this BlackJack program for a school project
I have 52 image files, labelled from '_1' to '_52' in my resources folder, each number corresponds to a card.
My question is, how do I get a picture box to assign the correct resource according to a variable
So, say I have
"pictDealerCard1" -> picture box which displays the first of the dealers card DealerCard1 = 37 -> random number generated through INT(RND() * 52) and resource '_37'
I need to assign a varible in a while clause. I.e., i would do it in php like this: while (!is_bool($char=$this->getChar()) in every loop, the function would assign $char a value, the is_bool function would test it, and the code INSIDE the while clause would have access to that $char.
i would like to assign the value of a combobox to a variable and use this variable as a parameter on the insert statement.see code below,code 1 works ok,but code 2 brings an error relating to wrong datatype,i cant seem to find where the problem because i think i am doing everything right.
[Code]......
i would like code 2 to work so that i can assign the variables different values at different scenarios. column serialno is a foreign key from table Stock.
I want to assign a string value to a variable in the DataGridView LostFocus event. I found that I can't just do variable = "string value, it will give me the "Unable to cast object of type 'system.eventargs' to type 'system.windows.forms.datagridviewcelleventargs'" error.
The function created by double-clicking on the datagridview is:
Private Sub DataGridViewInvoice_LostFocus(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DataGridViewInvoice.LostFocus
I'm trying to retrieve data from an access database, but I'm trying to do it all in VB. Basically I need to query the database, and I think I've done that correctly. But then I need to assign the value in a certain field, to a variable. So for example, Dim email = orders.CustomerEmail. How to assign a value to a variable.
Below is my current code: Dim acc As New AccessDataSource() accDS.SelectCommand = "SELECT TOP 1 orders.OrderDate, orders.OrderNumber, orders.OrderProduct, orders.OrderTotal, orders.CustomerName, orders.CustomerPostCode, orders.CustomerEmail" accDS.DataFile = "~/App_Data/Database.mdb"
I get nothing but headaches when I try to update settings in the My.Settings class, or when I try to assign a newly assigned setting to a variable. Sometimes the settings update OK at run time; other times times they update only after the application closes; and other times still they appear to update at run-time, then when I close the program and reopen- they go back to the previous settings.This is how I assign a value to a my settings and how I assign a setting value to a variable.[code]
Dim code As String code= " <meta http-equiv="Content-Type" content="text/html; charset=windows-1254"> "
i think i am getting this error because of double Quotation marks "character constant must contain exactly one character."how can i assign it to a string?
I think I remember reading somewhere that it was possible to assign items to a variable if the item inherited from a base class, but I can't remember how.
I want to have a class that gets properties set and one of the properties is an error code property. I want to assign any exceptions that occur to the property, but it could be any type of exception. I remember that all exceptions inherit from the Exception class.
How can I assign an exception to a property based on the class it inherits from?
Any way to attempt to assign a variable within a data class or structure when I have the variable name as a string. Where would this be useful? Let's say I have a data class that exactly mirrors the columns of a table in a SQL database. This lets programmers easily interact with table row data as it gets passed around as an actual, specific object since Intellisense can enumerate the variables for them, etc.
However, populating such an object is tedious and repetitive--the programmer who creates the new object has to one by one match up all the members when reading from the SQL data adapter. It would be nice if they could somehow enumerate all the variables in that class and attempt to auto-assign the values from the database instead of having to build a custom population method for each new data class. A person could create a hash table or tree or something that pairs member names with actual objects.
I'm wondering if it is a typo. Do they actually really wanted to say: the implementation of the JVM is free to instead of the compiler is free to.
and my second question is that do we have this issue with C#/VB as well? (in which the ""compiler"" is free to assign a value to a variable even before the variable is fully initiated/even before the constructor function of the class of the variable is fully ran.
How do I assign the query result to a variable.I am using SQLlite. Below is the code for retrieving password from the User Table. I need to compare the given password and the given password.
Dim i As String Dim p As String i = txtUserID.Text
