I have written this loop to read the result from a stored procedure and write the records out to an excel file. When I look at the spread sheet at least one record is truncated from the original data set.
[Code]...
I have this procedure that is supposed to write out all the records in the dataset to a text file.
When I check the # of records in the dataset, there are 10813, but the procedure only writes 411 records to the file.
Private Sub btnDoItBest_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDoItBest.Click
Dim dlg As OpenFileDialog = New OpenFileDialog()
[Code].....
I am taking in two html files and creating one out of them. To do this I am opening the first html file and not writing out the closing </body> and </html> tag and opening the second file and not writing out the corresponding opening tags, as well as the <style></style>section. I start a streamwriter, and write the lines out to it, and then close the streamwriter. My problem is that the output file is filled with strange characters. I've tried opening the streamwriter with different character sets as the third parm, but all this does is change the characters to different strange characters.It says charset=windows-1252 at the tops of the input files (and the output files for that matter - since I'm just reading stuff in and writing it out - with the exceptions mentioned above).Questions;First, do you think I am properly approaching appending two .htm files together?Second, how can I eliminate these strange characters.
[code]...
i have a strange problem. my programme writes to an Excel File, and enters data fround on a Word file and another Excel File.
the problem is sometimes we get an error message advising:
"The Picture is too Large and will be Truncated"
does anyone know what this means and how to avoid it?
it does not affect the programme from continuing after hitting OK, but i would like to know what can be done to correct it.
I am using the following code for a combobox to display a series of codes depending upon the value entered in combobox1. This works fine except the column being displayed contains a 6 character field (A99999) and I would like to display only the last 5 numeric characters rather than the whole column. otherwise I shall have to add an additional field into the table which contains just the numeric part of the code.
Dim LowestVal As String
LowestVal = ComboBox1.Text & "00000"
Dim HighestVal As String
[Code].....
I'm reading in an excel file with the following code:
Function Read_Excel(ByVal sFile As String) As ADODB.Recordset
On Error GoTo fix_err
Dim rs As ADODB.Recordset
rs = New ADODB.Recordset
[code]....
Cells longer than 255 chars are getting truncated, and I'm not sure if there is a way to stop it easily?
Update: The truncation only seems to happen if I select Distinct. If I leave the Distinct off it shows the full cell.
I'm working on a project using SQL Server Express 2008 R2 and Visual Basic 2008.My table has 8 text fields, each using the data type VarChar(num) with the number(num) ranging from 5 to 50. There are also number fields and a boolean field in the table.When I try to insert or update the table in Visual Basic the program runs through to completion, but the VarChar fields only contain the first character. The other fields come out fine. If I create the record in SSMS the fields are not truncated.
View 13 RepliesI am trying to insert some data from my windows application to sqlserver 2008 R2 Express.But i am seeing this error..please see my code below:i am not able to find what is error
creditfunction(invoice, datetoday, totalamount, duedate.ToShortDateString, paidamount)
Public Sub creditfunction(ByVal invoiceno1 As Integer, ByVal datetoday1 As Date, ByVal totalamount1 As Single, ByVal duedate1 As Date, ByVal paidamount1 As Single)
[Code]...
I have an observation to share about the 1st character of a checkbox text being truncated when the FlatStyle property is set to system. Details follow: I am using Microsoft Visual Studio Team System 2008. Development Edition
A few details copied from the Help -> About -> Copy Info button
Version 9.0.21022.8 RTM
Microsoft .NET Framework
Version 3.5
Installed Edition: Enterprise
Microsoft Visual Basic 2008 91904-270-3624373-60139
Here are the steps that I followed:
File -> New Project -> Windows Forms Application
Double clicked the CheckBox from the Toolbox and it started to show up on Form1.
In the CheckBox properties, I set the following:
Text: Windows
Font Name: Arial
The Font Size is left to the default which happens to be 8.25 in my case.
FlatStyle: System
Now note the 1st character of the CheckBox. I see the "W" truncated. I tried modifying the CheckAlign and TextAlign property values as per this page: [URL]. But could not find a reason. Changing the FlatStyle or the Font size seemed to work. But for this specific set of property values, the W isn't rendered correctly.
String or binary data would be truncated. The statement has been terminatedAs I've looked back on my backend or code. It looks like there's a conflict adding a TWO LABEL DATA in one column because I would like to join the (Year)-(StudentNumber)Here's the code of my INSERT INTO Statement
INSERT INTO
[Student_Information] (StudentID, LastName, FirstName, MiddleName, Gender,
ContactNumber, Citizenship, Religion, Birthday, Address)
[code].....
This gets data from Excel and puts it into a table. The first 2 rows of data are placed into the table. All the fields columns are the same type and nothing is larger than it should be name is varchar(30) team is varchar(3) pos is varchar(2) rest are int or double. I place an i in front of integers s in front of string and so on. The 3rd row crashes with the following message at Command.ExecuteNonQuery() String or binary data would be truncated. The statement has been terminated.
Option Strict Off
Imports System.Data.OleDb
Imports System.Data.SqlClient
Public Class Form1
[Code] .....
Protected Sub cmdOK_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles cmdOK.Click
Dim medID, medName, comment As String
[code].....
Am using Vb.NET 2008 and SQL 2008. I have a problem, when the execution reaches daAdapter.Update(dtTable) then I receive this error ""String or binary data would be truncated.The statement has been terminated"" Then the record fails to update.Below is the complete code. Thanx in advance.
Dim SQLCon As SqlConnection
Dim SqlQuery, SqlQuery1 As String
Dim daAdapter As SqlDataAdapter
[code]....
iam trying to insert some values to SQLServer 2005 Database.The following error displaying.I changed the corresponding column size,still the error persists.how can i sove this error-:'String or binary data would be truncated.The statement has been terminated'
Me.Personal_detailsdbTableAdapter.Insert(Me.FirstnameTextBox.Text, Me.LastnameTextBox.Text, _
Me.PassportnoTextBox.Text, Me.PlaceofbirthTextBox.Text, _
Me.SexTextBox.Text, Me.DobDateTimePicker.Value.ToString)
This is the SQL Database Table Design
firstnamenvarchar(50)Checked
lastnamevarchar(20)Checked
passportnonvarchar(50)Unchecked(Primary Key)
[code]....
For the life of me I cannot find the solution to this error. All field lengths match the length of the SQL Server data field. Here is the insert code I am using... the same to the code that is used elsewhere in the program.SQL Server Express 2008 R2 and VB 2010 SP1.
Dim blnInputError As Boolean = False
Dim blnPrimaryKeyError As Boolean = False
Dim blnIsError As Boolean = False[code].........
I have a very simple stored procedure built in SQL Server 2008 that looks like this.
CREATE PROCEDURE [dbo].[usp_delBannedIP]
-- Set Required Parameters
@RowID int,
[code].....
In DGV, if the contents of the cell is truncated, the DGV shows ellipses (three dots) (...); but as the font is set to a Gujarati font, it displays a Gujarati alphabet "ઈઈઈ" instead of "..." because the Gujarati character "ઈ" is coded with the English "." (dot) character.In Gujarati font, "." can be generated with the English character "P".So, How can I change the ellipses to English "P" character? OR How can I remove the ellipses completely?I have found a similar solution by berc on Tuesday, August 31, 2010 1:33 PM :but I am not sure it is the perfect and/or the only way to do so, AND it will really work or not
View 2 RepliesI can retrieve records from my Database fine, but I'm having trouble updating records. I am getting a syntax error on [code] I get this error when I change the Last Name (Row 0, Column 1). [code]
View 4 RepliesI have problem when i inserted data. the error show String or binary data would be truncated. What is meaning of that??
This my code:
Try
SQLCONNECTIONS.connect()
Dim sqlcmd As New SqlCommand
[Code].....
how to get records into oracle database delete from db & update the records i have successfully connected my vb 2008 win form with oracle 10g.
View 1 RepliesHow do I update records in a dataset with records in a transaction file?
View 3 RepliesI want to search the records from the textbox and display the records to the datagridview, if there are no records, just display empty on the datagridview.
this is not working:
Dim sqlsearch As String
sqlsearch = "SELECT * FROM setting WHERE mname LIKE '%" & TextBox.Text
[code].....
I have this piece of code wich works perfectly when inserting records into one table using records from another table. My question is that now i need to create another table by using records from 3 other tables (tables are related). Can i use aliases on the column names, like on Oracle SqlPlus? How will be the syntax of the 'INSERT INTO SQL statement?
Dim MyConn As ADODB.Connection
Dim MyRecSet As ADODB.Recordset
Dim tmpSQL As String
MyConn = New ADODB.Connection
[code]....
I am working on creating a program that records animal data (wombats) and stores it into a database, using vb.net. I am trying to add new records into a database but every time I click add, to execute that, there are duplicate records that gets added. How do i write the code so itonly adds it one time. I am using a data reader. Here is the
[Code]...
I want to search the records from the textbox and display the records to the datagridview, if there are no records, just display empty on the datagridview.[code]
View 8 RepliesI have a function which works great in my console app. But when I move it over to my WCF, it bombs out every time. Can't figure out what I'm doing wrong. Here's the operation contract:
[Code]...
using the StreamReader / StreamWriter code. I want to store a new password in a .txt document that will later be printed. Here is the code I have so far. The code runs but I cannot find the .txt document.[code].....
View 2 RepliesI need to write a file that will be built mostly from simple text and divided by "|" but in one of its fields i must to use BinaryWriter to store the string as binary and not a simple text, is there a way to do it?
View 10 RepliesThis append feature does not seem to work. I've looked in many places to no avail. The other examples below for writing and reading seem to be going fine.
Private Sub ApFile(ByVal textFilePath As String)
Dim objWriter As System.IO.StreamWriter = file.appendtext("textTBD")
objWriter.WriteLine("textTBD")
[code].....
I'm trying to clean-up after an exception, and I'm not sure how to handle a StreamWriter.[code]If somethingBad1 throws an exception, I don't need to do anything to sw; however, if somathignBad2 happens, sw has already been created and I need to close it. But How do I know if sw has been created or not?
View 3 Replies