Ive written a code to calculate wholesaler and retailer. i dont know why the program is giving the same results. help?
'Created By: Amehd Gutierrez, 4cs230
'Project Name: Johnson Products Calculator
'Project Purpose: Calculates and displays the total price of ann order, based on the number of units ordered and the customer's status.
[code]....
how to associate a select case statement with, which point to four Function procedures, to four radio buttons that are used to +, -, *, and / two simple fractions in a fractions calculator. This is a class assignment for which I have already been graded. I used an If...ElseIf statment and it worked perfectly. Now I am trying to utilize the Case Statments with Function Procedures to do the same thing. I do not get graded for this, but I was told to research it an find an answer. My current code is listed below.
[Code]...
trying to write a simple form for calculating professor's salaries depending on their degree and position.my problem is that the when i select a check box, the value is not being updated until i select a different radio button. it probably doesn't make much sense here,
Public Class frmMain
Private Sub optLecturer_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles optLecturer.CheckedChanged[code]....
the values being assigned to my salary label are correct, but are not being updated until i select a new radio button. im not entirely sure how to get around this so that the value is updated as soon as i select the check box.here's when the program looks like:
I am working on a calculator and I'm trying to use select case statements for the symbols selected (radio buttons) as opposed to If then Else statements. I am running into trouble because I'm only used to using them with list boxes.[code]...
View 4 RepliesI am new to VB 2005, and need help with use of radio buttons. I have two sets of radio buttons set up in my from, each set has three buttons. The problem is that when I run my program, it runs them as one set (i.e. I can only select one button in the form) I want to be able to select one button from each set, how is this done?
View 3 RepliesI am new to programming. I wrote this simple code but it seemed not working at run time. I mean not selecting particular file extensions when I am selecting the particular radio buttons. By default each radio button is set to false on Checked property. Also there is no syntax error.
[Code]...
Is there a way to select multiple radio buttons within a groupbox. I have a case where I need to disable the mutually exclusive feature.
View 21 RepliesI want to place two radio buttons in so I can select one of them to use one formula, and then select the other to use another formula. I want to use the I=P(1+r)^n formula and I=P(1-r)^n formula with the radio button text showing Appreciation and Depreciation.
Heres my copy of the original code.
Public Class Form1
Private Sub cmdExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdExit.Click
End
End Sub
[CODE].......................
I'm using a dialog form with two buttons and two Radio buttons.I'm oppening this Dialog when a button is clicked on the parent form.My situattion is when the Dialog opens the code in the button event continues to execute, but I only want it to continue to execute only after a button from the dialog form have been clicked
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
If multipleEXT = 2 Then
Extension.Show()
[code]....
When my form loads it adds some handles (using AddHandler) to a sub (showStatus). What this sub does is checks which control activated the sub (using sender.Equals) and displays text in the status label (status) accordingly.For this I use an If...Then statement for each possibility. There are many possibilities and my code get cluttered. Is there a way to do the same thing with a Select...Case statement. I tried: Select Case sender Case tbOne : status.Text = "blahblahblahblahblahblah" End Selectwhere: tbOne is a textbox, status is a StatusLabelIt gives me an error though, saying "Operator '=' is not defined for types 'Object' and 'System.Windows.Forms.TextBox'."Any ideas on how I can get this to work with a select case statement?
View 13 Replieshere is my code..
[Code]....
If the result is 86 and it's mod by 43 the answer is 2 Case 2 is not firing. it just goes to the end of the procedure.
i have a program using a select case to convert letters to special charaters. My question is how can I get the code to read upper and lower case letters without having to put the upper case letters in my select case statement. Example: Part of my code is
[Code]...
My VB application is behaving strangley. I have form with fairly large number of controls. I am using case against radio buttons. after curtain number of buttons, it stops responding to more radio buttons.
Then I tried to split controls in to 2 form but now my form.showdialog() too now working properly. It takes new from names but show the old form when running.
ive got a form containing treeview on the left docked, and two panels one over the other (just as for practice), so i am using treeview to select one from the other the code contains the Case select,
If
Not e.Node
Is
Nothing
[code]....
The problem is , both panels are not visible, when i select the first node the firstpanel is visible then i select the second node both panels are not visible, i return to the first node the first panel is visible.
im trying to add two radio buttons together to get a full price, they are split up by two group boxes. Meals and dormitories, I have the prices on how much they are, but I dont know how to put the right radio buttons in the right places and then add them up, here is the code I have so far
Public Class Form1
Const decRadioButtonmichigan As Decimal = 1500.0 ' this is suppose to go in the dormitories group box
[code]......
I am trying to figure out how to use radio buttons.when the radio button is selected it should display a integer number in the text box.
This is what i have so far[code..]
My homework is the following: public Class Form1
[Code]...
I have a need to add 16 radio buttons to a groupbox but I want to be able to select 2 radiobuttons per groupbox. (2 vertical columns of 8 radio buttons each) The radiobuttons are created dynamically and each set of eight have different names to distinguish them. Do I really have to create 2 groupboxes and put each set of 8 in each groupbox and put those groupboxes into my parent groupbox? Is that it with radio buttons...if they are all in 1 groupbox then there is no way to select more than one at once?
View 1 RepliesI'm having issues with my current homework. I've got 6 different radio buttons and depending on which one is checked, the corresponding price shows up in the text box. I'm not sure if I need to create a sub-procedure or what. I can't seem to get anything to work.
[code]...
I've gotten this far with the code but not sure where to go next.
I've figured out how to run through the radio buttons and save their checked status to a text file. Now Im trying to recheck them according to the value. Here is what I have.[code]...
View 1 RepliesIs it possible to create a list of radio buttons similar to that of a checked listbox?And the list of radio buttons should be able to be managed like that of a CheckedListBox?
View 2 RepliesI have several textboxes in my form and a groubbox that have four radiobuttons. I want all the values of the textboxes (and the selection of the radiobuttons) to be stored in sql server. As far as the values of the textboxes in concerned, I managed to do it. But what about the selection of the radiobuttons??? This is the code I am using for the textboxes:
objConnection.Open()
objDataAdapter.InsertCommand = New SqlCommand()
objDataAdapter.InsertCommand.Connection = objConnection
[code].....
What I have is a search program where people can enter in a person's policy number or first and last name and then chose which company to choose from. I have 7 radio buttons. Two are grouped in one groupbox the remaining 5 are grouped in a second groupbox. The two in the first groupbox are to chose whether to search by policy number or by firstname and last name. There are three text boxs. In the other group box is just radio buttons with list of companies to choose from with one radio button set to search through all companies. My problem is, how do I get my code to where I can choose to search by either policy number or by first name/last name and to then choose which company the person is with. Here is my code I have so far:
Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
Dim connetionString As String
[Code]....
Just finished this and figured I would share.. It just uses images, but works very well.. Have a couple work arounds in there so you can still bind it to a Class. Let me know what you think:
View 1 RepliesI have a Windows Forms application.I need some type of pop-up windows that will give the user a way to select one of several options.
View 1 RepliesI've created a structure as seen below:
Structure MemberType
Dim FirstName As String
[CODE]...
This was at the very top of my code. The gender data comes from radio buttons.
My code for adding user input into the structure is:
MemberArray(i).FirstName = txtFirstName.Text
MemberArray(i).Surname = txtSurname.Text
MemberArray(i).Gender = radFemale.Checked = False
I'm not sure about the last line re. data from a radio button. Does this say add to the structure only if the male radio button is checked?
My second question is how do I get data from the gender variable in the structure? I want to calculate how many Males versus Females have been stored in the array. I've tried all sorts of things, but nothing works.
Examples of faulty code / logic are below:
Private Sub btnAddtoStructure_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAddtoStructure.Click
Dim i As Integer
[CODE]...
I was trying to get a running total based on totalmales (and the same for totalfemales) and then display these results in another form.
I am creating a program to help tutor Paramedics students and the drugs they need to memorize during there classes. I have a form that presents to a student a Trade Name of one of these drugs and then they have a selection of 4 possible generic names to match to. These generic names are then presented to the student with 4 Radio buttons.I want all 4 of these Radio Button to be in Deselected mode when the form presents itself to the student with the Drug names.I have set all 4 radio buttons to "Checked=False", but when I 'F5' to test, the first button always comes up selected. I even tried to put in the Form_Load area,
Private Sub TradeGeneric_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Me.rbGenericName1.Checked = False
Me.rbGenericName2.Checked = False
[code]....
I have a code that on form_load it populates a combobox and a datagridview will then display records according to what will be selected from the combobox.I have to categories in radio button groupbox-- ELEM and HS, I would like that when user click on the ELEM radio button the combobox will be populated with only the ELEM records.[code]I tried the changed event and click event of the radio button but it is not working.
View 7 RepliesPrivate Sub Button9_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button9.Click
If RadioButton1.Checked Then
[code].....
I'm trying to draw multiple radio buttons on my form. I've used this same logic to draw multiple text boxes and for some reason, this doesn't work.
For counter As Integer = 0 To rc - 1
'controller name Radio button and properties.
Dim dynRadio As New RadioButton()
Me.Controls.Add(dynRadio)
[code]....
I have validated that:
rc = 3 and the loop does iterate three times.The values that come back from the db are correct.xAxis and yAxis are placed properly and is the same increment as my text boxes.It's just not giving me three radio buttons for some reason. It only displays the first one.