I am new using Jquery. I am using vb.net 2008, and I have built a gridview and populated it with data. I am trying to use jquery to go in and remove rows if one of the attributes of the row does not equal the user that I am currently looking at.
View 1 RepliesI have a gridview which generate a link based on certain condition inside the Grid from code behind. What I want to achieve is when I click on that link, I want to catch all the information from the row that the link is in. So for example, if row 1, 2, and 4 has links in cell 5, When I click row 1's link, I want to get all the cell value from row 1. When I click on row 2's link, I want to get all the cell value from row 2, etc. I am somewhat close but not quite. When I click on row 2, I still get the same value from row 1, same as when I click on row 4, I get the same value from row 1.In short, I want to get the row's value based on the link that's in the row. Here's my code:
$('a.SendEmail').click(function(e){
var Name = $('#<%=GridView2.ClientID%> td:eq(1)').text();
var Id = $('#<%=GridView2.ClientID%> td:eq(2)').text();
[code].....
I am working on Treeview control and Gridview Control VB.NET08. In the Treeview i have Parent and Child Nodes. Like:
- 31
3101
3102
[Code].....
I am working on Treeview control and Gridview Control VB.NET08. In the Treeview i have Parent and Child Nodes. Like: [Code] Comparing the Parent Node text and first two digits in the Column values. I want to add rows inbetween the gridview rows based on the parent and Child Nodes. If i expand the First Parent Node Called "31" then according to the Number of Child Nodes (for first parent node(31) there are 5 child nodes.) add rows in the gridview.
These New rows should be add under the 31-xxxx. If i expand the 32 Parent Node based on number of Child Nodes, add rows under the 32-xxxx. [Code] I am getting the rows in the end of the Gridrow not in the Specific row.
I am currently using DevExpress 10.2 within Visual Studio 2010. In a previous question I was trying to print the current user view of a DevExpress GridControl with the user's choice of expanded or collapsed master rows and/or group sections. I was told this was not possible at this time. I have now decided to use the following code:
[Code]...
How do I use this jQuery function to remove a row.
$(document).ready(function() {
$("tr").filter(function() {
return $('td', this).length && !$('table', this).length
[Code]....
Here I have another control delete button, in delete button I will get a id to delete, here I want to pass that id as a parameter to script function ,
and I want to search hidden field contains those value and delete that row.
Private Sub btnDelete_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Handles btnDelete.Click
'some operations
ScriptManager.RegisterStartupScript(Me, GetType(String), "Deletearow", "DeleteGrid_Row(" & Me.hfSelected_GvResultsRowTocID.Value & ");", True)
End Sub
I have a gridview in asp.net/vb and it is bound to a list - so there's no standard sorting available. I've found this jQuery plugin for sorting tables: [URL]. The plugin requires <thead> and <tbody>. The problem is, that my gridview only renders the <tbody>.
I've already tried
DataList.UseAccessibleHeader = True
DataList.HeaderRow.TableSection = TableRowSection.TableHeader
But this changes nothing.
My gridview markup:
<asp:GridView runat="server" CssClass="grid" ID="DataList" AutoGenerateColumns="False" AllowSorting="True" ClientIDMode ="Static">
<Columns>
<asp:BoundField HeaderText="SomeHeaderText" DataField="SomeDataField" />
<asp:BoundField HeaderText="SomeHeaderText" DataField="SomeDataField" DataFormatString="{0:dd.MM.yyyy}" />
[Code] .....
I have a xml like this:
<?xml version="1.0" encoding="utf-8"?>
<xs:PersonaRCV xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:Identificacion>201232934</xs:Identificacion>
[code]....
and i called it in my aspx like this:
<pre><asp:Label ID="LBXML" runat="server"><%# Server.HtmlEncode(FormatXml(Eval("Respuesta")))%></asp:Label></pre>
Finally the code seen with Firebug looks like this:
<xs:PersonaRCV xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:Identificacion>401690010</xs:Identificacion>
<xs:Nombre>MAX FRANCISCO</xs:Nombre>
I was trying to do something with jquery replace:
var queHay = $("#MostrarEsconder" + myVal + " span").html();
queHay.replace('/<xs:/', '');
but i can't get it to work.Anyone can suggest something to get my results as i want them? with jquery or in codebehind in my FormatXML function!
I have an Excel sheet that looks like this.
View 1 RepliesI have a jQuery 'toggle' function on a table that I am using in conjunction with an asp.net gridview. I have pagination on my gridview and when I click on the next page, it posts back and therefore closes the Toggle/Table - I need a way of keeping it open. I have had a similar issue in the past with the Accordion function but resolved it via this method
<asp:HiddenField ID="hidAccordionIndex" runat="server" Value="0" />
<script language="javascript" type="text/javascript">
$(function () {
[Code].....
Is there a way to trigger a GridView rebind from an html markup page using jQuery or jscript?
I have an ActiveX download control which passes all events via jscript.
So, a have a download complete event on the markup page but not the code behind.
Here is the main aspx page:<asp:Content ID="Content1" ContentPlaceHolderID="Head" Runat="Server">
<script type="text/javascript" src="aurigmaiuembed.js"></script>
<script type="text/javascript">
function FileDownloader_DownloadStep(Step){
//The file list is going to be downloaded - "2 = About to Start"
if (Step == 2){
[Code]...
Access <asp:table> table rows added by javascript in asp.net webform . Apologies for the duplicate question but I'd really like an explanation why this is the case. It is probably due to my lack of understanding on how browsers process HTML tables on submission to the server.If I have a <HTML> table or an <asp:table> control on an aspx page and I add rows to it client-side using JQuery / Javascript, why can I not include these added rows in a post-back to the server?
I've been trying to get this to work and it looks like I can't do it based on the answer to the previous question. But can someone explain why this is the case? The table itself can be returned in the post-back but the only rows present are the rows that were part of the table when it was sent to the browser originally - it does not include the rows added by the browser.there was a way to include these new rows in the post-back, the same as any client-side user input?
Basically, Is it possible to get a grids row count using jquery.if my grid has 20 rows in it not including the header or footer, i want to now the count of actual rows, this will tell my users how many tasks they have in their list.
View 3 RepliesI want to make a gridview with 4 columns. (Checkbox, Hyperlink name Title, Dynamic name Price, Dynamic named ASIN#)I want to be able to add new rows to the gridview from three different strings. I have a function that looks like this:Private Sub displayData(title As String, cost As String, asin As String)Is it possible to even add new data to the gridview with these strings.I've looked all around online and most things deal with databases. I'm also not 100% sure how to initialize at gridview.
View 1 RepliesHow do you clear the rows out of a gridview
View 1 RepliesI have a gridview that contains user info and one of the columns is a date when the user was added to the system. Is it possible to use the GridView.onRowCreated method to check if the user was added within a given time frame? If the user was added within that timeframe, then the row is added, if not, then that row is not added.
Note that I can't modify the datasource of the gridview, so I need to do this somehow as the gridview is being created.
Is it possible to loop through a gridview with more than one page, the gridview I'm looking at has a pageSize of 20, there are say 26 records (over two pages) and I want to be able to loop though all the records.
For Each row As GridViewRow In GridView.Rows The count of the above is only 20 as the pageSize is set to 20, I can see that the pagecount is 2 but how do you loop through the next page in a gridview? Or would I have to just iterate through the orginal datasource?
Remove columns in gridview?
View 1 RepliesI have a dynamically-created GridView which to which I'm attaching a handler using the AddHandler command. The problem is that when I try to refer to sender.rows within that function, it won't do anything because it says that sender.rows.count = 0. I've done enough dynamic form creation that I'm pretty sure that I'm creating the controls, binding them, and adding the handler at the proper points during the page init/load load_complete. Also, I have nearly the exact same code-behind on another form that is not dynamic, and it is able to access the values in the rows.
Considering that the RowCommand event is firing, it's clear that I'm clicking on a row. For some reason it's just not in scope for the handler event. Background: What I really want to do is access the values that are databound to the row. I'm creating a SQLCommand and binding that to the dynamic grid, and I would prefer to talk to the grid's datasource, but that doesn't seem to be possible. Perhaps I'm missing something, but for now it seems that reading the values from the GridView (which I hate doing) is the only thing that works.
[Code]...
How can I implement the following:I would like to have a checkbox on the top of my gridview. When checkbox is checked should show all the hidden rows from the gridview but when is unchecked should only show the unhide ones.
I only need 1 checkbox at the top(not in the header of the gridview), I found couple of examples but all of the have checbox as coulumn and then added to the header as well.
I have asked a question similar to this in the past. I was able to resolve it by removing gvRowDataBound completely from the code. This is similar code except I can't remove gvRowDataBound sub.
The issue is that when you click the Edit button of the first row, it allows you to successfully update that row.After the first row, if you click on thr edit button of any other row, enter the value to update, it doesn't update that row.
Instead, the cursor moves down to the next row. I didn't design this and having difficulty figuring out what needs to change.
[Code]...
So I've created a gridview with checkboxes so the user can check as many fields as they want and delete them with the click of a button. It works except that it deletes all selected rows except one, the row with the lowest number. I can't firgure out what logic error is causing this.
Here's the code for the delete button procedure:
Protected
Sub btnDelete_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnDelete.Click
Dim count As Integer = 0
[Code]....
I would like to filter Gridview1 with, control checkbox, and code as "If GridView1 rows of column FirstName have value 'John' then show only this rows."I have somehow with network help write this code. But code is not working as it should, and also I do not know how to add controls also for other rows with values such as 'James', 'Paul'...
For Each x As GridViewRow In Me.GridView1.Rows
If Not x.Cells(0).Value = "John" Then
x.Visible = False
[code]....
I have a gridview which gets its input from a database with sql. There is a column with checkboxes in the gridview, so you can select which row you want to export. There is also a column that's called "Project Number". When you push the button "Export" the program should figure out which row is selected, get the project number from this row and connect to the database to get the data from the selected projectnumber. I already got the part where it gets the selected checkboxes. But I'm stuck at the part where it gets the projectnumber from the selected row. Must be something with Datakeys I think.
View 2 RepliesI have the following code to add a new row into a datatable and then bind it to a gridview.I need to add a new row anytime i click the Button2.What do i need to change in the code so i can have multiple rows before i submit them to a database?
Private Sub BindGrid()
Dim DT As New DataTable
Dim Row As DataRow
[code]....
How can I implement the following:I would like to have a checkbox on the top of my gridview.When checkbox is checked should show all the hidden rows from the gridview but when is unchecked should only show the unhide ones.
View 6 RepliesMy datagridview is bound to a data table. I want to filter the datagridview without affecting data table. I know one way is to use bindingsource, but binding source will use column names in its filter. But I want to enable users to enter any string in a textbox to filter. So I pass datagridview by reference to a function PassFilter which removes unwanted rows in datagridview. I can see that it does execute rows removal in datagridview. But the problem is that when datagridview is shown on the form, it is unchanged, the same as the data table. I do not understand why rows are not removed on datagridview The code is as follows:
[Code]...
My datagridview is bound to a data table. I want to filter the datagridview without affecting data table. I know one way is to use bindingsource, but binding source will use column names in its filter. But I want to enable users to enter any string in a textbox to filter. So I pass datagridview by reference to a function PassFilter which removes unwanted rows in datagridview. I can see that it does execute rows removal in datagridview. But the problem is that when datagridview is shown on the form, it is unchanged, the same as the data table. I do not understand why rows are not removed on datagridview
The code is as follows:
DataGridView1.DataSource = table
PassFilter(DataGridView1, m_FilterQuick.strFilter.ToLower())
Private Sub PassFilter(ByRef datagridview As DataGridView, ByVal strFilter As String)
[code]....
I have a simple application that uses a database to store usernames and passwords.I have a hidden control that, when activated,should clear all usernames and passwords from the datatable.Then, one admin account is added. I have tried the datatable.clear method BUT while it throws no errors, it doesn't clear the datatable.I have also tried the datatable.reset method, with the same problem. I am now trying this method:
Dim row As DataRow
For Each row In Authenticate.Logins
row.Delete()[code]....
how do I do that? Here is what I have below and I want to remove all the rows from the datagridview?
Dim dataGridViewNetworkDevices As DataGridView
For i As Integer = 0 To dataGridViewNetworkDevices.Rows.Count - 1
dataGridViewNetworkDevices.Rows[i].Remove??
Next