I have a generic list that I'm removing items out of using List.Remove(Object). I have been removing items but whenever I get to the fifth item I'm removing it fails and does not remove it from the list. It doesn't seem to matter what I'm removing but everytime I try to remove five items it fails on the fifth item.
I have button that adds items to a list box and a button that removes it...the one that adds it works great but when i select an item to remove it doesn't remove it..i don't know if there's something wrong with the code or not..
Private Sub btn_Remove_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btn_Remove.Click list_MyOrder.Items.RemoveAt(list_MyOrder.SelectedIndex) prices(list_MyOrder.SelectedIndex) = 0 MsgBox("Select any item to remove") End Sub
If I have 3 times selected and when I click "submit" for example I want all my selected items to be removed, but when I try to do this only my first selected item is removed.
ListBox.Items.Remove(ListBox.SelectedItems)
How do I remove all 3 items from the list box at the same time?
Public Structure ReportOrderType Public ReportName As String Public ReportDate As Date Public SaveFile As String End Structure [Code] ....
Basically, I have a list of reports. In one place they get ordered, and later on the program looks to see which ones have come back -- see if the .SaveFile exists on disk. If it exists, then that report gets processed, and then I want to remove that item from the list of reports-on-order. However, I get an error message back that by doing the .Remove(R), I've changed the list itself & things won't go well with the rest of the For Each loop, which makes some sense.
When I get to this routine, the list of ordered reports will be something from a couple of dozen or less, and some number of them (perhaps zero, perhaps all, probably a few) will exist & be processed & then should be removed from the list. How should I go about accomplishing this? This is my first time working with List(of t) as a Visual Basic tool; everything I've used in the past has been with arrays, and I can do this there.
The ListBox gets populated correctly. After it is populated, i have a CommandButton and on the click event of the button, i want to remove selected items from the ListBox. So in the click event of the CommandButton, i have written the following code:
lstItems.Items.Remove(lstItems.SelectedItem)
After selecting an item from the ListBox and when i click the CommandButton, i get an error as "Items collection cannot be modified when the DataSource property is set".
I've searched on the Internet and I can't find a solution to this simple problem. I've also looked on Microsoft's MUCH improved MSDN site and haven't found a solution, so here it goes. I'm trying to remove an entry from a list of class and it doesn't get removed. Here's a sample of the code I'm trying: (I renamed the class and variable names to make it a simple example)
Dim lstClass As New List(Of TheClass) Dim mClass As TheClass I tried this first mClass.filename = "The Entry to Delete" lstClass.Remove(mClass)
I am trying to learn how to work with the different controls in Visual Studio for VB.Net in particular the List View and Tree Views. I don't have any code to show as I am not working on anything in particular just messing around with it to learn what the different controls do that weren't covered in my Intro to VB.Net class last semester.I would like a clearer explanation on how to actually use code for these controls. In particular adding and removing items from the List and Tree Views using code.
I've gotten a listbox control to populate with a list of installed fonts, but I need to be able to click a button and remove the selected item from the listbox. How do I do this? Every time I try, an exception is thrown.
Here is the code:
Public Class Form1 Dim fonts as New Drawing.Text.InstalledFontCollection Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
I am using a DataGridView bound to a BindingSource which is itself bound to a List of objects. This all works well until I remove objects from the list. If I am scrolled down to the bottom of the DataGridView and then remove a bunch of items from the list it is bound to it generates a DataError exception because the length changed and the rows I am looking at no longer exist... I changed my code to handle that error, but now instead of popping up a message it SLOWLY erases the data in each of the newly invalid rows at the end of the table (I think each time it does one it generates a new DataError, which is why it is so slow).
How do I prevent this? I want to be able to dynamically (and programmatically) add and remove items from the table without the possibility of this error... I assumed this would be handled automatically as part of the data binding process but I guess not.
I don't know what is wrong with this code, but it is not detecting when there are no items in the listbox. It ALWAYS returns that there is something in the listbox, even when there is not and keeps erroring on the line of code in BOLD.[code]
I am trying to search through listview in VB.net 2008. It works fine with small list, but when the list is big ( around 25000 rows), if I search multiple items , it fails saying that index is not valid. Obviously what I understand is , it it tryiong to remove an index does not exist. But I am unable to figure out where exactly it is going wrong.
PS : while it is doing search through the entire listview, I am incrementing index = index+5 becasue I want the next 5 rows to be in the selection state as well.This is the code Private Sub TextBox1_KeyUp(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles TextBox1.KeyUp If (e.KeyCode = Keys.PageDown) Then
I am populating a combobox with data from a .txt file; however, there are 1000 entries but only 4 different possibilites 1, 2, 3, and 4. How can I have the combobox only allow a selection of the 1-4 with repeating all 1000 numbers?
So I have three listboxes, LB1 is an uploaded list, LB2 is a master list, and LB3 is generated from LB1 items that are NOT in LB2. I have a button that replaces the selected item from LB1 with the selected item from LB2, woot.Since LB3 is a subset of LB1, I want to be able to select the items from LB2 and LB3 and have it replace the item from LB1 but running into some trouble with finding the appropriate item without selecting it. [code] highlight Fred from LB1 and Freddy from LB2, click and Fred becomes Freddy in LB1. I want this same change to happen but by selecting the "Fred" located in LB3 (If LB1 is hundreds of names long, I don't want to have to sift through it and only make the changes that need to be made). [code]
Im working on a school project where i add items to a listbox in two columns. The first being the name of a course and the second being the credit hours of the course. I can add and remove the items just fine BUT when i remove an item im also required to subtract the credit hours of said item from a variable i have called "totalhours." Essentially im trying to figure out how to subtract a certain piece of a selected listbox item from my class level variable.
For Each item In ListBox1.Items For i As Integer = 0 To ListView1.Items.Count - 1 If item.ToString = ListView1.Items(i).Text And ListView1.Items(i).SubItems(1).Text = TextBox4.Text Then
[code]....
It only deletes 1 listbox item while there are more items that have to be deleted.after debugging i get this:List that this enumerator is bound to has been modified. An enumerator can only be used if the list does not change.
I want to remove items from a listbox 1 at a time. I have two timers set up to remove the two types of items that are put into the list box. When there is a "Player 1 killed Button 1" following a "Player 1 killed Button 2" or vise-versa they get removed at the same time. Is there any way to prevent this?
Code: Public Class Form1 Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim XP As Integer [Code] .....
I need to know if there is a way to remove any items from a listbox if they contain no text. Like if there are three items(Blah, ,Blah) listed in the listbox like so (remove the middle line that is empty so the listbox now contains two items(Blah, Blah) listed like so Or if there is a way to do this to a textbox that would work too. I'm working in VB 2010
So, I am working on something which requires various session Data to be held. I need to be able to delete certain data from the session, but not clear the whole thing. Obviously, I can manually delete session items with
I'm wondering what the proper way to remove an item from an array is. The way i am doing it at the moment is:MyArray(0) = NothingIs this the best way to do it as i'm having problems with my programme and i think it may be something to do with this
i'm creating a web form and i want a user to be able to make certain selections and then add the selections to a text box or listbox.Basically i want them to be able to type someone name in a text box ... check some check boxes and for it up date either a text for or a list box with the result on button click...
I was generously guided by the community to use LINQ to find duplicates on my listboxes the last time around. However, I am now in a tough spot because I need to find and remove duplicates from a multicolumn list view. I tried using LINQ but it says that the listview object is not "queryable". Is there a way for me to find and remove duplicates using only one column of the listview? [code]The code now runs fine when I call it. But it does not remove the duplicates:
How would I remove an item from the listbox.. I used the code below to populate using a class with description and value properties. I cant use listbox.items.indexOf("listitem1") to get index I cant use listbox.items.remove("listitem1") If I use listitem.items.removeAt(1) it works of course. How can I get my index in this case?
'Users Dim IAdapter2 As New ds_SecurityTableAdapters.Security_UsersTableAdapter Dim usersDT As ds_Security.Security_UsersDataTable = Nothing usersDT = IAdapter2.GetUsers() Dim userItems As New List(Of myItem) [Code] .....
Is there a way to remove items in code generated in Codedom from VB code?
For example at the top of all the code I generate, it has:
[Code]...
I'd like both of these to go away - the commented text and the both the Option xxx. I've tried toying around with CodeGeneratorOptions, but have not been able to remove the above from generated code.
I have to make a listbox with a few(8) names in it & double clicking on a name in the listbox will removed the name from it. I have already add the names into the form using the listbox.items.add method & would display the names in it. Then I enter the coding for 8 names in double_click procedure (listbox) using the "listbox.items.remove" method. However, when I try double clicking on a name in the listbox, it would remove all the names instead.
I have button that adds element in array and displays the item that is added in array in the listview, And also i have button that deletes it but it's not working.
Here's the code: Private Sub btnRemove_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRemove.Click Dim i As Integer Dim new_array As New List(Of String)(movieArray) With ListView1