I have an issue with a string where I pull the field from a table and the field is showing a return character, (shows as a little box).
I know how to replace quotes or other characters in a string.
Question is how do you replace a return or remove it from the string?
I have a text box on a form. Within this text box is a bunch of text that includes some CrLf. I want to replace the CrLf with <P> so I can convert it to HTML.
I *THOUGHT* I could use something like...
Textbox.Text.Replace(vbCrLf, <P>)
...but that doesn't work.
I would like to insert the following into a string.[code]I want it to go into a string as follows [code]i.e. without the carriage returns.How do I achieve this?
View 5 Replieshow would I remove the carriage return line feed escape characters in bold here?
View 6 RepliesI am pasting data from an Excel spreadsheet and and adding a 0 to the start of each 9 digit string it's it's missing. This works great if I'm pasting from notepad but from excel I see from this line of code
RTBUserID.Text = RTBUserID.Text.Substring(1, RTBUserID.TextLength - 1)
that there seems to be a carriage return (denoted by a square)
System.Windows.Forms.RichTextBox, Text: 62818972" & vbLf & "62819154" & vbLf & "62999101" & vbLf & "62985054" & vbLf & "...}
Question is, how to I remove it.I have tried the following code but to no avail..
For x As Integer = 0 To RTBUserID.Text.Length - 1
RTBUserID.SelectionStart = x
RTBUserID.SelectionLength = 1
[code]....
[code]The code within the Private Sub replace the spaces within txtCallnumber.Text with carriage return line feed and does what I need it to, but when I place the code into the Private Sub that is above it places the carriage return line feed into the cells in the datagridview: column(CALL NUMBER). The txtCallnumber.Text is bound to the DataGridView column(CALLNUMBER). I do not want the DataGridView column(CALLNUMBER) to have the carriage return line feed
View 6 RepliesVBA 2008, Powerpoint office 2007. .NET.when i typed in a RichTextBox or Textbox. (sorry if it matters which text box i am using) maybe
" Hello, I am Russell!
i love you very much
that is all!"
maybe like this. and send this over to another device.when i received the message , i got " Hello, I am Russell!i love you very muchthat is all!"It did not read my CR or Enter. how do i implement this so that if there is any CR i can detect where it is and put it in accordingly?
I am generating report in word(i.e) I am exporting all the data from the database and replacing it in with the placeholder in the word document. While the data is being retrieved from the database if the data contains any enter or new line character it retrieves it with the boxes and hence it replaces the string in the word with boxes such as for eg. abc and then box icon and then xyz on other line for abc...xyz text.how can i eliminate the box icon and still display the data as above? I have tried replacing the character using chr(11), chr(13), system.newline etc but the box icon still exists? Is there any other way i can perform the above task?
View 1 RepliesI am having an issue doing the following:I would like to be able to count how many carriage return there is in a textbox.Is there a function that already exists that could search in the textbox the amount of carriage return ?
View 10 RepliesI am using a multililne textbox and I want to take the text typed and merge it with another string. So for example....
CoverPage = Replace(CoverPage,
Me.Note.Replace("{", "{").Replace("}", "}"), txtNote.Text)
Where Me.Note is a string that I am looking for and replacing it with the contents of txtNote.text. And then storing it all back in the string CoverPage.CoverPage is an rtf string that will holds place holders for the text I want to change.(That works) But when i update the note that may have a carriage return in it, the coverpage does not reconize the carriage returns comping from the Multiline textbox when its displayed.I have tried replaceing Enivronment.Newline with vbCr, vbCrl and whatever else I can think of. is there an issue with taking a string carriage control and tranfering it to a rtf carriage control?
I have a textbox, and it's set to multiline, so a user can enter a few sentences. The problem is, if the user hits the enter button while in the textbox, it's starting a new line. This data is being saved as a text file, and it's causing problems when the text file is loaded back into the app, causing load failures.
I'd like to completely make the enter key useless when the textbox has focus. Or, if they hit enter, it tabs over to another button.
Here is some code I used to make the enter button behave more like a tab-
Private Sub txtCallNotes_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs)
If e.KeyCode = Keys.Enter Then
Me.btnSubmit.Focus()
End If
End Sub
The problem is, the enter button still does a carriage return, causing a new line.
In the properties, Accept Return is False.
I want to insert a record using SQL and one of the fields needs to contain a carriage return, [code]...
View 2 RepliesI have to count the amount of enter (carriage return) someone did in a textbox set as multiline. Is there a function already there or one that I can create that will count how many times someone did hit enter.
View 7 RepliesI'm trying to replace all the carriage return characters in a string obtained from a multi line text box in a Windows Form with the string ", <BR>" so that when I use the string in some HTML it displays correctly.
Function Blah(ByVal strInput As String) As String
Dim rexCR As Object
rexCR = CreateObject("VBScript.RegExp")
[code]....
I'm using VB.Net and I am creating a mobile application. I have a checkbox that the text needs to be on more than one line. I've tried everything including setting the text property on the load screen function and using the vbCrLf and I just see the Line feed square but not multiple lines. I've also tried resizing the box and that didn't work either. how to make the text span multiple lines?
View 6 RepliesHow can I send a string to an email with new lines (carriage returns) included?
The problem is that I am sending the string to an email, and the email strips out the carriage returns.
Dim myApp As New Process
emailStringBuilder.Append("mailto:")
emailStringBuilder.Append("&subject=" & tmpID & " - " & subject)
[Code].....
I'm trying to replace all the carriage return characters in a string obtained from a multi line text box in a Windows Form with the string ", <BR>" so that when I use the string in some HTML it displays correctly.
Function Blah(ByVal strInput As String) As String
Dim rexCR As Object
rexCR = CreateObject("VBScript.RegExp")
[code]....
I have project that communicates with an embedded device via Telnet and displays the data string in a RichTextbox. Here is the (weird) problem: every time I send a command, the device responds, at the end of the response there is a prompt on a NEW LINE. However, when I ASCII encode the bytes received and display the string, the prompt is on the same line as the response in the text box. So I looked at the bytes for several different commands and the response always starts with a 13,10,13 which is CR, LF, CR, that puts the response on a new line, also displayed on a new line in the text box.
However, at the end of the response, there is always a 13,13,10 (CR,CR,LF) followed by the prompt, but in the text box the prompt is NOT on a new line it is merely a couple of spaces after the response. The funny thing is that this behavior is absolutely not present in Hyper Terminal, or Tera Term applications, when I connect to the device using Tera Term, the prompt is always on a new line. Even the VS IDE shows this correctly in the Output window, every prompt is on a new line. I can not for the life of me figure out why this behaves differently in my RichTextbox. I have experimented with different settings for the textbox, but so far nothing worked.
I've seen this type of line in many post on here..I been rolling this over in my head and i think that this line or something close to it is a bad idea. For index As Integer = ListView1.Items.Count -1 the above line assumes that on the last line the person has hit the enter button which is VBCrLf(carriage return and Line Feed) in which case the above line would be ok..however if the last line does not contain a CrLf then you in effect are skipping the last line.
View 25 RepliesUsing vb.net/asp.net 2005
I am trying to create a string message for an email that I am sending out from my asp.net page like so:
For Each dr In dtDataTable.Rows
strMessage = strMessage & vbCrLf & vbCrLf & Environment.NewLine & dr.Item("UserName") & Environment.NewLine
Next
so I am looping through a datatable and getting each name from each row, that is working well but when I get the email it appears in my inbox with all the names mashed together, you see I am trying both vbcrlf and newline but looks like neither is working
I have to text file in the following format :
Word[tab][tab]Word[Carriage Return]
Word[tab][tab]Word[Carriage Return]
Word[tab][tab]Word[Carriage Return]
I want to get all the words before the tab into one array or to create a new text file and the all the words after the tab into another array or create a new text file too.
Here my function to get the words before tab into an array :
Protected Sub MakeWordListBeforeTab()
Dim filename As String = "D:lao�0001.txt"
'read from file'
[Code].....
I wrote the above function to get all words before tab but I got all the words into array. I've been trying to use the Split method above. What is another method to split those words ?
I know this can be done with regular expression but I don't know regex yet. If you can show me how to get this done with regex it'll be awesome.
The file reads in parameters and two of the parameters used to be in Date Format YYYYMMDD but will now permanently be in format YYYY-MM-DD. This change, I believe, is stopping the import of the file from working. I would like to replace the new format YYYY-MM-DD back to YYYYMMDD in the code. If possible I'd also like to see some output so I know that the old format has been replaced with the new format. The code is below. I added the two rows with .replace code in green in expecting that to be enough but it is still not working.
Public
Sub Main()
Dim R1, O1, P1, C1, strDateFrom, strDateTo, strRunDate
As
String
[CODE]...
Suppose i have two strings which is given below.
CODE:
Where ever i find , it should be replaced one blank line and " replace by "
When i migrated the data from MYSQL to SQL Server 2005, i found few problem in one of the column. In MYSQL indicates as new line and " indicates as ".
Problem: Your task is to take input from the user in string and give the following options to the user in a menu.
1- Find a String
2- Create sub-string
3- Erase a portion of a sting
4- Replace a word in the string
5- Count number of words and characters in the string without spaces.
6- Capitalize first character of each new sentence and convert the rest
of the characters to lower case.
7- Sort all the words in alphabetical order. (Use Bubble sort algorithm to perform sorting).
To perform all the above mentioned tasks you can only use pointers. Create a function to perform every task.
I have the following web method:
<WebMethod()> _
<ScriptMethod(ResponseFormat:=ResponseFormat.Json, UseHttpGet:=True, XmlSerializeString:=True)> _
[Code].....
I wanted to use HttpGet here so that the result can be cached.
I tried every variation of calling this, but no luck. Is this possible with GET?
i am making a l337 speak generator..Lets say I input bob12321 (although i can input anything)I would like to make the program replace the "b" with either [code]How would i do that... I tried string.replace - but it says character A cannot be turned into long (on a seperate word)[code]
View 6 RepliesI have a non standard text file, ie its not delimted etc, its pretty much free flowing. What I want to do is to search for a specifc string eg. "xyz123" and then replace it with what a user types into a text box, lets call the text box and its contents "txtreplace".
I am trying to replicate a find and replace function essentially, but will need to tailor it later on down the line, but this will be a starting point.
I am using System.IO.FIle.ReadAllText() to get the contents of some template files that I created for email content. Then I want to do a Replace on certain tokens within the files so I can add dynamic content to the template.Here is the code I have, it seems to me like it should work just fine...
Dim confirmUrl As String = Request.ApplicationPath & "?v=" & reg.AuthKey
Dim text As String = IO.File.ReadAllText( _
ConfigurationManager.AppSettings("sign_up_confirm_email_text").Replace("~", _
[code].....
For some reason I cannot get the %%LINK%% and %%NAME%% Replace() calls to work properly. I checked to see if it was encoding-related, so I made each file UTF-8. And also used the forced encoding overload of ReadAllText(String, Encoding) and still no dice.
I have Project i need to recovery file System . And some information who Create that file , deleting , replace , Modifying . I need also return any file delete or replace .
View 2 RepliesI want the Function to accept List(Of String), Array & String and similarly return List(Of String), Array & String respectively. The Function simply adds a string (month) to the input collection. I just want to use it for string, array and list with needing to think of conversions.
[Code]...