can I get some additional assistance with this same approach? I went through this entire excerise as well and ran into the same issue as the gentleman (FthrJack) who started the discussion. That is, the .dll "RichTextBoxPrintCtrl.dll" does not get created and/or cannot be found, therefore, cannot include it as a tool.[URL] I'm using Visual Studio 2010 and am a neophyte VB programmer.
View 8 RepliesI am NEW and don't understand a lot so I copy and paste and try and learn. I am trying to print the contents of a Rich Text box. Previous post pointed me to KB 811401 dated 11/13/2007, revision 5.5.Following stemp by step. step #1 in the second part says "click Build solution on the Build menu". But i don't have that option. i get Build RichTextBoxPrintCtrl or Rebuild.... or Clear.... I selected build. Is that right?
View 7 RepliesI have a rich text box with images and the formating all setup right. I am tyring to print them to the default printer. I think I am on the right track but need some direction.
Private Sub PrintDocument1_PrintPage(ByVal sender As System.Object, ByVal e As System.Drawing.Printing.PrintPageEventArgs) Handles PrintDocument1.PrintPage
Dim fnt As New Font("Arial", 8, FontStyle.Regular, GraphicsUnit.Point)
e.Graphics.DrawString(rtbReceipt.Text, fnt, Brushes.Black, 0, 0)
e.HasMorePages = False
End Sub
This prints only the text in rtbReceipt, but no images and no format.
[code]....
View 5 RepliesI am working on an applictation to scan windows files to check for missing files, i have a couple questions on how to do this.I would like to use the %systemroot%system32 that way that it doesn't matter what drive letter it is, i'm not sure how to do this because when i tried it, it told me the file i was looking for didn't exist (in this case C:windowssystem32 undll32.exe) which does exist. Is there some way to use the %systemroot%?
Also, i am trying to print the resaults to a rich text box such as if rundll32.exe is missing put in the box "rundll32.exe is missing". How do I allow it to write it in the box, I tried the print command, but it didn't work.
I am unable to load rich text files into my rich text box. It worked fine yesterday, would there have been anything I could have changed by accident?
With OpenFileDialog
.Filter = "Text format (*.txt)|*.txt|Rich Text Format (*.rtf)|*.rtf|All files (*.*)|*.*"
[Code]...
but I am getting the error File format is not valid when i attempt to open any Rich Text file
I have a rich text box which I use in order the user is able to add pictures, coloured writing, different font etc... however I need to load specific text in the rich text box when the user load the Form.how I can add (I guess) the HTML to load this every time the user load the form.
P.S the text will change depending on who loads the form so I can not do a simple
RichTextBox1.LoadFile("C:Documents and SettingsDesktopSigniture.rtf")
On the main form of my application, I have a Rich Text Box which is where the user will be entering information. The text is black. then, i have a button which calls the dialogue "Notes" A dialogue appears, with a rich text box. the user should then be able to enter text into the box, click "OK", and the text entered into the Notes dialogue be inserted to the rich text box on the main form -- with the font colour "Red". The rest of the text in the main rich text box on the main form should remain black.
View 2 RepliesI'm Making a Simple syntax highlighter and I'm Doing the highlighting in the text Changed event of a RTB and for obvious reasons I can't re highlight the whole document each time someone presses a key so i highlight one line each time the text changes. But this creates a Problem. If someone pastes code into the RichTextBox It only highlights the last Line. So is there a way to get if the user typed the text in with his keyboard or pasted it from the clipboard in the text Changed event?
View 6 RepliesI have a question, how would i have a button, then when you click it, it puts the text at the text cursor in the RTF?
View 5 RepliesHow to get list of all resolution of client monitor and check with resolution passed by application
View 2 Replieseveryone! I've been at this for a while, and I'm not sure how this issue can be resolved:I'm working on a project in VB.Net, and I have a form with a rich text box. I have a groupbox with 4 radio buttons inside that are intended to change the font color of the text. Coincidentally, I have to repeat this same functionality for a 2nd set of radio buttons that would change the text font family.
At any rate what I've only been able to do is the following to successfully change the font color of whatever text I highlight in the rich text box:
Private Sub rbtnBlack_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles rbtnBlack.CheckedChanged
rtbxTextEditor.SelectionColor = Color.Black
End Sub
Private Sub rbtnRed_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles rbtnRed.CheckedChanged
[Code]...
Is there a way that I could write a sub (I'm assuming I would use a sub, since I don't think I need to return anything, thus eliminating the use of a function) that would handle the action of changing the selected text color in the rich text box without having to use a separate sub for each radio button? Mind you, per my teacher's specs, she doesn't use a button handler for any of this.
1. Is there anyway to make an application look as though it has been set to a screen resolution of 1024 x 768 when the true resolution different?
2. I am developing my app using a widescreen monitor. What dimensions does the form need to be set to so that it looks exactly the same on a normal & widescreen monitor?
I am working on an program and I need it to change the size on the form and the button etc when its ran on a different resolution then it was coded on. Is there anyway to do this easy or do I have to hard code it on two different and change it by like a button etc? I am working with a 1024 X 780 and a 1240 X 1024.
View 8 Repliesis it possible to make first 60 characters in a rich text box a different color than the remaining text?
View 25 RepliesI have a very high screen resolution on my laptop: 1400x1050.My colleague tried it out on his laptop (which had lesser resolution), and the application did not fit on his laptop. The buttons were dragging out of the screen space.So, I want my application to automatically resize/adjust based upon the screen resolution.I don't want to use Maximized screen option and don't want to change user's pc settings.Unfortunatly I am not using Table Layout panel.
View 5 RepliesIn my application,I placed the user control on a panel,I want to resize that control on a panel automatically according to different screen resolution.
View 6 RepliesCan we set the windows form resolution according to pc screen resolution and even the control should be adjusted...
eg.
My screen resolution is 1366 X 768
and my form size is 1254, 709....but I want it so set according to the screen and it will be dynamic...
if I transfer my project to some other pc with lower or higher resolution it should be adjusted....
and suppose I have few controls on the form...will that also be adjusted??
I had designed all forms on 1280/800 screen resolution.
i want set all forms resolution like the current screen resolution of the user,or make the form resolution is dynamic with each resolution of screen for
I will show 3 columns of text in rich text box. i want show the column border with color.i can separate the texts with tabs or spaces but showing data in columns and cells will improve the visual of my program .
View 1 RepliesOkay, so what I want to do is directly output formatted RTF text to a Rich Text Box control in VB.NET. I don't want to find the text, select it and color it as it is not practical for what I'm doing. I've tried outputting RTF code but that isn't working either. Can I actually do this or will I have to write a dll?
View 1 RepliesI've been wanting to create a look like the attached jpeg Ive been looking around for a few hours for a solution to make text boxes transparent or have a background image. I've found a few projects on this form and elsewhere which include transparent text boxes, but every time I try to use it the way I need to--with the text box over a picture box--there are always various rendering errors. Most of the time, the text box is transparent if its just placed on the form (not over any other controls). But when I place them over other controls (like picture boxes), the 'transparent background' always take on the color of the form background.
This is one that I was trying to use. I found a few others around, but they all had the same render errors more or less.[URL]...I figured transparency or background images would have been supported natively. Anyone have any ideas? Maybe I missed something in my searches. I didn't really see anything which adds background images in text boxes (rich or otherwise). At this point, I'd just like anything that works, so it doesn't really need to have transparency--just a simple background image would be great.
I am currently creating an application which monitors any errors that occur in the other applications I have developed.
One thing that I want to try and do is add a sort of discussion thread into the form, so this allows for each member of IT to add comments/notes about the error that occurred.
Normally I would just use a DataGridView or a ListView, but I would like to have the capability for the comments/notes to be multi-lined so that the user can see what has been written without having to scroll sideways.
I am currently creating an application which monitors any errors that occur in the other applications I have developed.
One thing that I want to try and do is add a sort of discussion thread into the form, so this allows for each member of IT to add comments/notes about the error that occurred.
Normally I would just use a DataGridView or a ListView, but I would like to have the capability for the comments/notes to be multi-lined so that the user can see what has been written without having to scroll sideways.
I am currently creating an application which monitors any errors that occur in the other applications I have developed.One thing that I want to try and do is add a sort of discussion thread into the form, so this allows for each member of IT to add comments/notes about the error that occurred.Normally I would just use a DataGridView or a ListView, but I would like to have the capability for the comments/notes to be multi-lined so that the user can see what has been written without having to scroll sideways.
View 7 RepliesHow can I change certain text's color (like Visual Studio does with "Public Class" or "Public Sub") is inside of a Rich Text Box?
View 14 RepliesHow can I fully justify text in rich text box?
View 1 RepliesI want to transfer data from one rich text box to another but when i use RichTextbox2.text = RichTextbox1.text it transfer just text not images.if there is any way to do so?
View 4 RepliesI have ~ 1 page how to that is currently in a text file which I want to add to a richtext box.I am just wondering if there is some way I can just copy/paste it so it keeps its formatting etc.
View 1 Replieshave more than one text color in the Rich Text Box, because when I highlight one word and use the color changer, it changes ALL of the words in the text box, and I want to know how to be able to have a specific word, or words, be a different color.
View 13 Replies