RichTextBox Text Color Programmatically?
May 14, 2010I'm trying to color a particular line in a rich text box but cannot see an obvious way to this programmatically? [code]
View 2 RepliesI'm trying to color a particular line in a rich text box but cannot see an obvious way to this programmatically? [code]
View 2 RepliesI have a form with a richtextbox and a scrollbar. I want to be able to keep appending text to the textbox without loosing my selection. I can save the selectionstart and selectionlength before I append the text and set it back and it works. The problem is when it comes to reverse selecting. The best I could do is set back the selectionstart at the right position but I have to move the mouse so it selects text again. I'm using the following functions before and after I append the text:
Private Sub StopRepaint()
Dim pt As Point
' Stop redrawing:
SendMessage(txtchat.Handle, WM_SETREDRAW, 0, pt)
[code].....
My main goal is to be able to select and copy text even when new text is being appended to the richtextbox. Anyone knows how to correctly select text in reverse OR easily fix my problem about text being deselected?
Trying to change the color of more than one of the same text within a RichTextBox. [Code] The above code searches for, and changes the color of all "Boat"s found in the RichTextBox. There are a few problems, such as: If you were to go back to edit the RichTextBox and place your cursor in front of the, now blue word, "Boat" and type then all of your text would be blue. Also, the text you wish to change the color of in the RichTextBox MUST be Exactly the same as: "Search1", aka "Boat", capital letters and all.
View 2 RepliesI want do a syntaxhighlighter in richtextbox. Example RichtextBox content:
function veri()
{
var numara = 1;
for (i=0; i<100; i+=numara){document.write(i)}
}
I want make "function", "var", "if" ... etc words make blue. Is there any function in VB like Replace for richtextbox (i can use color)
I coded this but not performed for long strings:
Dim son_yer As Integer = 1
If RichTextBox1.Text <> "" Then
Do While InStr(son_yer, RichTextBox1.Text, kelime) > 0
[Code].....
Is it possible to determine the color of a particular text (at some position) in a Richtextbox without selecting the text and using the SelectioColor property?
View 5 Repliess it possible to save text from a RichTextBox with a certain color (e.g. Red) to the hard drive or the Clipboard?
This is a horse
This is a dog
This is a cat
[code].....
what i want to do is have a list of string such as
Dim ColorRed as list(Of String)
If
Yes
No
Command
Some
Text
and if a richtextbox.text.contains(ColorRed) ||| a string from ColorRed then it will color just that some string the color red NOT THE WHOLE TEXTBOX just that word
so basicly i wanta make a texteditor like the one in vb.net is that possible? so lets say underlined = red If this code is commanding the some of the number blah the text also yes
I searched this topic and set RichTextBox1.SelectionColor = Color.Red after click button1, and set RichTextBox1.SelectionColor = Color.DarkBlue for button 2 click event. But after I clicked either button, the text color was always black as forecolor set.
View 8 RepliesI am attempting to change the color of certain text while i am typing in the richtextbox area my only problem is. because its a selection if i keep typing then whatever is selected will be removed.[code]...
View 4 Repliesi'm trying to only change the color of the selected text in a richtextbox using the color dialog.. this code changes all the text..
Dim dlgcolor As New ColorDialog
dlgcolor.Color = PictureBox4.BackColor
If dlgColor.ShowDialog() = DialogResult.OK Then
[code].....
Going in more depth currently over on MSDN on how to parse a color line to the richtextbox.
To explain more imagine you have various types of information. For example sake say a....
PRIVMSG
NOTICE
MODE
being parsed to the richtextbox. Now we have one sub to deal with all these three messages from the server but each needs it's own color.
Now currently i can only think about on each arrival of a new message loop the RTB length and match a a string.
Is there any way when we append to the RTB with the new string we can parse that new strings color also?
I want to put some text in rich text box and want to control the colour of it.
E.g.: "Here is blue, and here is red!"
I am opening an exe that launches in a hidden cmd window, and redirecting the text to a RichTextBox on a form. The problem is that the status messages in the cmd window are in color, but the redirected text in the RichTextBox has no color information and show as black on white. However, all the status messages in the cmd window have headers that could be parsed in some way so I can add color to them for my RichTextbox. For example, a message in the cmd window might read: [Warning] No settings file was found, using default values instead. This message is in Yellow in the cmd window.
[Code]....
I'm trying to find a way to change the color of one word when appending text to a Rich text box. So if I append the sentence "This is a sentence with a specific word in one color" The entire thing will be in black except for the word "specific" it will be in red or any color I choose. The same thing will happen if the next line appended is "Please be specific in your request". All back except for the word "specific". I don't want the text added then someone has to click a button to change the color. It should happen as it's appended.
View 6 RepliesI noticed no way to modify color at all with textbox, is this accurate? no way to enable html parsing, etc...richtextbox can without enabling html(better because scripting using html like font size, etc...can be un-desirable to allow all html...
[Code]...
I need to display my text which were read from .xml database as color, italic, bold, etc. in richtextbox, how do i make a code to do that,The reading and displaying is fine, but when certain word like again is read it should display in italic, and whenever a word like over is read it should be display in bold or underline etc.I use vb.net 2003 and .xml for the database.
View 1 RepliesHow to programmatically change foreground color and make bold text in individual cell location on DataGridView control (Visual Basic)?
I use "dgMatrix.Rows(r).Cells(c).Value = x" to assign individual numeric values to individual cells in a DataGridView control. My question; is there a similar way to change foreground color and make bold the text in this cell, by specifying the individual row/column cell location?
For example; for cell (row 3, col 5) in the DataGridView make text in cell say red and bold or blue and bold so as to highlight and distinguish individual cell contents. As needed, I will also need to reset these properties (foreground back to automatic/black and font from bold back to regular); the reset could be done globally to the whole DataGridView as opposed to indiviaually by cell.
how to change the color of a text inside a " " on a richtextbox in vb.net I am creating a simple editor and I want it to be a color coding text. I want to color the text that are inside the " ".
View 8 RepliesI need to jump to the last viewed position of the text in my richtextbox when I open my project again.
I used GetScrollInfo to obtain the position of the scroll box within the scroll box.
How do make my application to jump to this same location on the scroll bar and also within the text in the richtext control?
I am using VS 2008 with .NET Framework 3.5.
I have a datagrid view with 8 columns. How do I change the background color for any cell in columns 2-5 where the value equals the value in column 8. For instance:
[Code]...
Public Sub textcolorchanged() Dim searchword As String = RichTextBox2.Text.ToString.Trim
[Code]...
I searched word of datagridview1 rows and highlighted search word in rich text-box. text(it is having total text) I called this method in datagridview1 mouse click and key-up and key down event
word is highlighted in rich text-box.text when I mouse click and key up and key down on datagridview1 rows of search word but some time getting full text is changed color how???
I am adding characters to a RichTextBox one character at a time and setting the format of that character after it is added. The following code is a distillation of the actual code but reliably repeats the problem I am having.The code should place a Blue "S", a Red "S" and a Green "S" in to the RichTextBox when i = 3.
View 2 RepliesHow can I programmatically reset my form background from a picture to a solid color. I have no trouble changing it to a picture or even changing it to another picture, but when I try to change it back to a solid color, it won't work.
me.backcolor=color.red 'OK
me.backgroundimage=my.resources.dog 'OK
me.backgroundimage=(none) 'error
me.backgroundimage=my.resources.none 'error
How do I reset it back to a color? It's stuck in a picture mode.
I need to set the color of the font every time I add text to the RichTextBox
I'm using. RtbResults.AppendText(DisplayPacket)
To add a new line of text, but each line needs to be a set color.I found this on the net but it doesn't seem to work in my VS11b RtbResults.AppendText(DisplayPacket,forecolor,backcolor,font)
Are these the correct overloads? can I do this another way if this doesn't work?I don't want to have to insert the text then go back and select and change its color.
I would like to be able to change colors of certain items in a richtextbox when they are typed for example the word "the" in this small example.The words would change to the color for the word.
View 3 Replieshow change font color for some word in Richtextbox example : when write "The lost" in Rich font color change to blue ...and other word don't change ...other example : same "DIM","AS" and "integer" in VB.NET ,,how i can do it?how to save the word from richtextbox to text file ?
Note : I'm using VB.NET 2008
If someone types in something like "red", I'd like the word's font color to become red. I tried something like this:
Dim red As String = "red"
Dim fnt As Font = New Font("Microsoft Sans Serif", 8.25)
If RichTextBox1.Find(red) > 0 Then
For Each _str In RichTextBox1.Text
Dim my1stPosition As Integer = RichTextBox1.Find(red)
RichTextBox1.SelectionStart = my1stPosition
But I dislike the highlighting-type approach.
I'm trying to find a few words and i want them to be for example in red.this is for a Html Editor. so i need it to list all words. for example i would need it to highlight "div", and "table", and lots of other words. all of them need to be red. or if it could highlight all words that are in "< >" would be amazing. iv been searching google and the internet for like 4 days. there is code out there but it will only highlight one word.
View 4 RepliesI am doing the following to change the color of a word in a RichTextbox, but it sorta has a bug in it, which I'm not sure what to do with it.
vb.net Private Sub ScriptEditor_KeyUp(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles ScriptEditor.KeyUp
[Code]...
My Question i want to jazz the text up by alowing the user to change there own font color but i dont know how send the dont and then recostruct it on the other clients end Eg Me: Im Pink You: im red and The usernames are diffrent then the text YOUR NAME is Blue And Other Users Are Green how would i send the font for every user and then display the text in the text box on the otther clients heres the code i use to send text
Code:
SendData("CHAT|" & txtSend.Text)
heres the code i use to set the font
Code:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
ColorDialog1.ShowDialog()
txtSend.ForeColor = ColorDialog1.Color
End Sub