In a user control I have the code shown below.
I now realize that it is incorrect because the container's InitializeComponent property initializations have not run yet and they must be run prior to Refresh being called.
How (where) can I run Refreash after the container has initialized this user control.[cod]e...
I am opening a form with a user control with some code like this:
Dim Frm = Form1
Frm.UserControl1.Property2 = Value
Frm.Show
[Code]....
I tried it and get an error but maybe I'm tring the wrong way. Can a usercontrol inherate an application defined class ie.. could you inheritance a classic rect class into a user control to add the hight and width properties to the control without having to do all the coding all over again? Currently I just declair a private instance of the class within the control and then encapsalate. It would be nice if I could just inherit all the functionality of my classes into controls designed to implament the classes.
View 1 RepliesI've created a user control that is basically a Panel that contains 1 label,3 TextBoxes and a few properties that set/get some short integer values.During a form load event I display a number of these Panels.I then access the Panels name (and other panel properties) via a user-created handler for the panel's click eventHowever I would really like to access the values from the user-control's properties.
Public Sub load_Panels()
Dim pnlName As String
Dim x As Short = 69
[code].....
I have a User Control which is dynamically placed by CodeBehind as follows:
Dim myControl As Control = CType(Page.LoadControl("~/Controls/mainMenu.ascx"), Control)
If InStr(Request.ServerVariables("url"), "/Login.aspx") <= 0 Then
mainMenu.Controls.Add(myControl)
End If
As per an example from my previous question on here.
Within this Control is a repeater which calls a database to generate values.
My Repeater mark-up is as follows
<asp:Repeater runat="server" ID="locationRepeater" OnItemDataBound="getQuestionCount">
<ItemTemplate>
[Code]....
The example above works fine, but I want to be able to prepend text to <%# Container.DataItem %> in the title attribute of that <p> to print to the browser like this is some text DATA_ITEM_OUTPUT
When I try to do that though, it prints this is some text <%# Container.DataItem %> exactly like that, ie, turning <%# Container.DataItem %> into text, NOT the value from the repeater code.
It was working fine before I made it into a dynamically inserted control, so I am thinking I might have something being generated in the wrong order, but given that it works without any prepended text
I'm trying to test/debug a WPF UserControl library in Visual Studio 2010 with the User Control Test Container.exe. I keep getting the error "Assembly [...] doesn't contain any UserControls." This should be simple, and every msdn article and blog tutorial I've looked at suggests that it should all just work perfectly and magically.[code]Project File has debug options set to open UserControlTestContainer.exe, with ./MyTestLibrary.dll as a command-line arg.
View 2 RepliesI'm making a control and I am trying to finalize my design time properties grid. I have several List(of Class) items as public properties and when I click on the design time menu (while testing the control) there is the word "Collection" and a button with an ellipsis (...) that brings up a neat pop up with the buttons Add/remove and all of the public properties of the collection's class on the right hand side. Basically for a non-collection instance of a class (with public properties) I'd like a similar button to show up. I know I could put all of the properties in the main control class and group them, but I like the pop up box feature. Anyway to duplicate this? (think font grid item etc.)
View 3 RepliesI have an application going here Form1 has a panel on it named TargetPnl. I need my TargetPnl to display my user control named Vviewer when I click my SearchBtn and also need it to disappear when I click another button.
View 1 Replieshow can i call a VB function - deleteevent() in usercontrol.ascx.vb from a javascript function in clickhandler(e) in usercontrol.ascx. The call should cause a postback because I need the usercontrol to display the changes.I am currently trying to do it by using a linkbutton with style display:none, and calling its click event from the javascript function. But i dunno how to call the click event.
View 2 RepliesChecking User control's properties?
View 4 RepliesI've built a custom user control in VS2010, incorporating two datagridviews, and asplitpanel - The idea is that there is a "Main" datagridview control, and the second is an internally controlled grid that (when shown) displays the Columns which are set as invisible. This allows the user to drag the columns onto the main grid, in order to display the columns.This all works fairly well. I've set the modifiers property on the Main DataGridView to public, so that by and large, the developers can make use of the control just like a normal DGV (albeit with an extra level to the code).
I've also created dummy events for each of the events that the DGV normally raises, and pass them through the usercontrol, so that the developers can attach to the DGV events as normal. Again, this appears to work fine.Unfortunately, I've run into a problem. I'm trying to set the RowSizeMode to DisplayedCells (or indeed any value). If I try it in the designer, it appears to retain the change until I run the application, after which the property reverts back to normal.
In my asp.net 4.0 application I have a standard set of tabs controls across the application that has one tab for Search, one for View and one for Reporting.I am in the process of updating those tabs and I was hoping to be able to wrap their functionality up into a single user control since they all function in pretty much similar ways. The issue I am having is how to create a property called SeacrhTab/ViewTab/ReportTab that allows me to assign a different user control to it depending on the area of the application (e.g. CompanySearchControl, ContactSearchControl, etc.) Anyone ever tried to accomplish something similar?
View 2 RepliesI have an aspx page that has two different user controls. I want to find user control A and be able to set properties, etc., from user control B.
I was thinking I could do something like this:
Dim CMFilters As Control = Me.Parent.FindControl("CMFilters")
...but that doesnt work to be able to set properties and call methods. I somehow need to get the user control and and declare it as that user control type.
I have created a user control with some properties but when I change them in a form and build the return to the default value, Here is the code I did:
Public Property ButtonFind As Boolean
Get
Return CmdFind.Visible
End Get
Set(ByVal value As Boolean)
CmdFind.Visible = value
End Set
End Property
I have created a user control and need to know how I can let the user change some of the properties of this control at runtime and have the values persist on next startup. There are multiple instances of this control on the form.
View 10 Repliessomething I just noticed which is work-aroundable but a little annoying. We have a user control which has several properties. These have not had the <Browsable(True)> Attribute applied. However, when we drop the control onto a form the properties are appearing in the property list
View 8 RepliesI've created a user control with a simple text box and a corresponding label and added a few custom control properties. When added to a form, I'm trying to loop through all control of this type and evaluate the custom property. In the below, the cntl.MyCustomProperty is not recognized. I can evaluate the property when I check each user control on the form by name, but not by using the loop below. I would much rather use the loop as it is much cleaner.
For Each cntl As Control In Me.Controls
If (TypeOf cntl Is MyUserControl) And cntl.MyCustomProperty = "ABC" Then
''Do some stuff
End If
Next
i created a user control and inherited a textbox.is it possible to remove some of the inherited properties of the user control?like to Multi-Line, PasswordChar etc also at the Form Design, when selecting the user control, there's an arrow on the upper-right which i also want to remove.
View 2 RepliesAfter taking a few years off from programming, I decided to start learning vb.net. I have created a user control that contains a picture box. I added some custom properties to the picture box that will hold general string data from a database.
My problem is that the user control is programatically created during run time, and during this time a DoubleClick event handler is added for the picture box that is within the user control.
I need to be able to set the custom properties for the picture box during the creation of the user control, so that when the control (picture box) is double clicked I can read these values but am unsure on how to access them.
The picture box is the entire size of the user control, or I would just add the custom properties right to the user control and add the DoubleClick event handler to that. However, double clicking needs to be done on the picture box since it takes up the entire user control, unless anyone has an idea to trigger the DoubleClick event of the user control when the picture box is double clicked.
[Code]...
I was looking for a tutorial and i find this
[URL]
but it does not give the sample code for creating a user control with properties, events, methods
complete to create windows user control? that includes creating properties, events, methods? and if it has how to create web user controls better
How do I set a User control (or a class with a few properties) to appear in the tan bar at the bottom of the Designer? I have tried googleing it but, I don't know what that bar is called (Kinda Hard to Google without know what to Google)
View 2 RepliesI remember in VS 2005 that when I was working on making user controls, if I removed the default Form1 and ran debug, that some sort of test container popped up. The window had a drop down menu to the right with some other properties so that I could choose from it the control I wanted to test. Choosing it would show the control to the left (in the main area) so I could test it, all without placing the control(s) on a form.
However, I cant find how to use this in VS 2010. I tried deleting Form1 and leaving nothing but by custom controls, but it just causes errors.What is the name of this window, and how can I get to it in VS 2010?
i am using vb.net 2005 to developed desktop application I am having two windows form user control , the first control name con.vb containing the design and code for connecting to database and getting a list of my project values in combo box.
Now the second user control report.vb which i am using to generate some reports , since the code behind is using connection to connect to various project database , so i want to get the value of
First user control into another how i can get the i have tried the below but its giving me error in run time but no error in design or code behind -
MR.MainForm.Connection1.project_combobox.SelectedV alue.ToString
Error i am getting is :
System.NullReferenceException was unhandled
Message="Object reference not set to an instance of an object."
Source="MDR"
I can load a generic user control just fine in my WCF service doing the following:
UserControl userControl= (UserControl) new Page().LoadControl("~/UserControls/MyControl.ascx");
However i can't seem to find any way to do this
[code].....
How can I basically lock a default property so the user cannot edit it? For example, if I wanted to lock the BackColor property, how can I make it so the end user of the control can't edit it?
View 1 RepliesI'm having trouble porting some .NET2-era C# to .NET2-era VB.NET. Specifically, I am trying to define an interface that an ASP.NET user control will implement.(For background, I am trying to re-implement Phil Haack's Model-View-Presenter example from several years ago: http://haacked.com/archive/2006/08/09/ASP.NETSupervisingControllerModelViewPresenterFromSchematicToUnitTestsToCode.aspx)
The C# interface I'm working from defines properties and events (IsPostBack, Load) that are already implemented by the base control.However, VB.NET is forcing me to explicitly implement these properties/events in the user control (Public Property IsPostBack() As Boolean Implements IView.IsPostBack...). I'd like to just define these in the interface and not have to do anything special in the code-behind of the implementing user control.I'm assuming that I can do this in VB.NET, I just don't know how. I've spent all sorts of time googling/bing-ing, and haven't come up with the answer.
I am trying to build a tournament bracket application. In order to build the application efficiently I would like to make a user control "GameControl" that represents a game and give it attributes that represent the names of the competitors "TeamNameA" and "TeamNameB" ,an attribute "Winner" to represent which team should move on, and an attribute "NextRoundGame" that assigns another instance of the user control so that it can assign the "winner" to one of the "TeamName" attributes of the next round in the competition. If the controls were native to VB I feel like I could do it easily (I have only spent about 30 hours self teaching/tutorial following) but I can't seem to find out how to pass values to custom attributes of custom user controls through code.
View 6 RepliesI am creating a form for work where managers can report when they find a customer's personal information laying around on a desk (we work at a call center where agents answer calls for a wireless cell phone provider, so we take personal information security very seriously). Anyway, I am wondering if there is a way to have a text box autofill with that manager's windows username (since they will need to be logged into their own profile to use the form).
View 2 Repliesi have a windows from project and in that project i created a user control lets call itcustombutton1 now i can use that control quite easily either at design time or runtime by creating a new instance of it like
View 1 RepliesI have created three user controls, which will be used on the various forms in my program. However, I need the buttons on one to call the other two.
View 1 Replies
