I have an application going here Form1 has a panel on it named TargetPnl. I need my TargetPnl to display my user control named Vviewer when I click my SearchBtn and also need it to disappear when I click another button.
View 1 Replieshow can i call a VB function - deleteevent() in usercontrol.ascx.vb from a javascript function in clickhandler(e) in usercontrol.ascx. The call should cause a postback because I need the usercontrol to display the changes.I am currently trying to do it by using a linkbutton with style display:none, and calling its click event from the javascript function. But i dunno how to call the click event.
View 2 RepliesThe code is listed below which hopefully illustrates what I'm trying to do:[code]....
View 12 RepliesHow can i put a user control in a panel??
View 1 RepliesI have a combobox and a few user controls, and a panel (attached screenshot) now what i want to do is when i select a specific option in the combobox i want it to display a different user control in the panel.[code],...
View 1 RepliesI have an aspx page that has two different user controls. I want to find user control A and be able to set properties, etc., from user control B.
I was thinking I could do something like this:
Dim CMFilters As Control = Me.Parent.FindControl("CMFilters")
...but that doesnt work to be able to set properties and call methods. I somehow need to get the user control and and declare it as that user control type.
I have a vb.net application that uses Flash movies (AxShockwaveFlashObjects.AxShockwaveFlash). I have buttons in the flash movie. When they first start using the application, they can single click on the buttons in the flash movie and button responds accordingly. But after a while (and I haven't been able to pin-point an exact thing that changes it or my issue would be solved), the user has to double-click on the button in the flash movie for them to work.
View 2 RepliesIn a user control I have the code shown below.
I now realize that it is incorrect because the container's InitializeComponent property initializations have not run yet and they must be run prior to Refresh being called.
How (where) can I run Refreash after the container has initialized this user control.[cod]e...
i am using vb.net 2005 to developed desktop application I am having two windows form user control , the first control name con.vb containing the design and code for connecting to database and getting a list of my project values in combo box.
Now the second user control report.vb which i am using to generate some reports , since the code behind is using connection to connect to various project database , so i want to get the value of
First user control into another how i can get the i have tried the below but its giving me error in run time but no error in design or code behind -
MR.MainForm.Connection1.project_combobox.SelectedV alue.ToString
Error i am getting is :
System.NullReferenceException was unhandled
Message="Object reference not set to an instance of an object."
Source="MDR"
I would like the main UI to load the custom UI Control which is specific to a particular client. Since every client may have different requirements, I have decided to create snap-ins since the rest of the application remains the same. However, the UI may require specific information for that particular client.
View 4 RepliesI built a VB ASP.NET 1.1 Web User Control that contains several properties. I want these properties to display in the VS2003 IDE Properties window, for easy manipulation. However, none of the properties appear! How do I make them show in the IDE?I am a C# guy, and not very familiar with VB, so this is probably a no-brainer. Here's a property, including attributes:
Private _priceHigh As String = "2000"
<Browsable(True), Category("SearchProperties"), Description("Foo"), DefaultValue("2000")> _
Public Property PriceHigh() As String
[code].....
What I hope is relevant code below, I would like the User to be able to Right click when hovering over the PictureBox container of a User Control and pop up a menu which allows a User to check or uncheck an item in the context menu. How can I acheive that?
[Code]...
create a simple control. The control have 1 label and 2 panels with images. The control needs to be clicked, the problem is i can create the click action for the control, i can only use internal click events. how to use it out of the control.
View 5 RepliesI have two user controls on the same page. One contains a ListView that displays navigation links, the second user control should be updated when user clicks on the buttonlink in the ListView.
View 1 RepliesI have a User Control that has been added to the page dynamically. When I click a button on that user control[cod]e...
View 2 RepliesI have a user control that I have added a listbox to. I have added this control to a form and would like to use its click event.
Private Sub mycontrol1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles mycontrol1.Click
When I click on the control on the form it does nothing none of the code for this event gets triggered. If I click on the listbox inside the user control that .click event inside the control does trigger. How can I make the click event for the user control trigger when the control is clicked?
I am trying to build a tournament bracket application. In order to build the application efficiently I would like to make a user control "GameControl" that represents a game and give it attributes that represent the names of the competitors "TeamNameA" and "TeamNameB" ,an attribute "Winner" to represent which team should move on, and an attribute "NextRoundGame" that assigns another instance of the user control so that it can assign the "winner" to one of the "TeamName" attributes of the next round in the competition. If the controls were native to VB I feel like I could do it easily (I have only spent about 30 hours self teaching/tutorial following) but I can't seem to find out how to pass values to custom attributes of custom user controls through code.
View 6 Replieshow can i call a VB function - deleteevent() in usercontrol.ascx.vb from a javascript function in clickhandler(e) in usercontrol.ascx. The call should cause a postback because i need the usercontrol to display the changes. i am currently trying to do it by using a linkbutton with style display:none, and calling its click event from the javascript function. But i dunno how to call the click event.
[Code]...
I have a User Control. In this user control I have a Repeater. In this repeater I have again a User Control. If I try to catch the click event of an ImageButton in this user control, I'm gettin nothing because the event has not been fired. Is there a way to catch this event?
Some code:
first user control:
[CODE]..........
In myUserControl:
[CODE]..........
This event isn't firing:
[CODE]..............
Also the following does not work because it returns nothing:
[CODE]...................
I have created several WPF User Controls. The lowest level item is 'PostItNote.xaml'. Next, I have a 'NotesGroup.xaml' file that has an ItemsControl bound to a List of PostItNotes. Above that, I have a 'ProgrammerControl.xaml' file. Each ProgrammerControl has a grid with four different NotesGroup user controls on it (and each NotesGroup contains 0-many PostItNotes.
Then, I have my main window. It also has an ItemsControl, bound to a list of Programmers.
So, you end up with a high level visual view of a list of programmers, each programmer has four groups of tickets, each group of tickets has many PostItNotes.
The trouble I'm having, is that I want to respond to a mouse click event in my mainWindow's code behind file.
I can add a MouseClick event into my PostItNote.xaml.vb file and that is getting called when the user clicks a PostItNote, and I can re-raise the event; but I can't seem to get the NotesGroup to listen for that event. I'm not sure if that's even the correct approach.
When the user clicks the PostItNote, I'm going to do a bunch of business-logic type stuff that the PostItNote control doesn't have a reference to/doesn't know about it.
I need update the text of a textbox when I do click on a button on a user control.
How I can do that?
I need update the text of a textbox when I do click on a button on a user control.
View 1 Repliesi have a User Control.In this user control I have a Repeater.In this repeater I have again a User Control.If I try to catch the click event of an ImageButton in this user control, I'm gettin nothing because the event has not been fired.
View 5 RepliesI've found various C# examples here, but I can't seem to get a VB version working.I want to be able to pass a simple variable into a User Control to determine whether it shows a certain section of data.It's basically a Customer Data form, and in some circumstances I need to show a line with the customers account number and sort code, and in some I don't, so my user control:
<controls:customerForm ID='customerForm' showBankDetails="no" runat='server' />
But I can't work out what to do with the showBankDetails variable in Code Behind to stop it from rendering that section, or simply hide it with a CSS snippet.How do I access that variable in the code behind using VB.NET?
I found that if you press F5 or refress from browser window, the last event fires again
example, I have clicked on a button, the button event is carried out normally, but if I refresh the page by pressing F5 key the same event is fired again.
I have two textbox and a button .... control on web page, ,,,
database structure...
ID Email Password
1 dd@d.com jhatri00
2 ff@f.com tyyuiioo
i want when i login using texxbox1 and textbox2 then it validate emailid and password if record find .... the it will display the emailid on the each page ........ of the logged in username ..... on everypage ...
I am creating a user control that contains a panel as well as 4 string and integer properties. I would like to display the text of the properties in the user control during design time.
View 3 Repliesi have 20 checkboxes in usercontrol ... i wanna do whole coding in user control ...
how to show msg box if user forgot to check asp.net checkbox control on button click .. ?
I am new to VB and seeking to create a visual basic program which controls the display of several on-screen elements depending on a single value input by a user. The user can enter anyone of 2500 values and depending on the value entered, five different display elements on the screen will change color or text. The program's response to a given input value never changes, in other words if the user enters 279, the five different display items will always be the same. However, there is no real pattern to the display items that would allow for programming an anticipated response to the input value.
My thinking is to create a large and ponderous "lookup table" in visual basic - I am assuming this an be done but perhaps there is a different or better method. I plan on creating the lookup file in Excel but was assuming I'd need to export it to something that VB could easily read. Any suggestions on the best way to do this? Does the lookup table reside as a separate .txt files someplace or something like that? [Code]
I need to quickly demonstrate a project and decided to create a user control that is connected to an Access database through pure simple data connections (create the dataset and drag it on the control.)When I build the project and add the usercontrol to panel control on the main form, no data is shown in the datagrid.When I add the data components directly on the main form, the data is displayed properly. why I can't get my databound user control to display the data on my main form?
View 2 Replies