codes to implement buttons to do the following
1. Pause a process/ action event.
2. Resume the process/ action event.
3. Stop the process/ action event.
4. Speak the time based on the clock.
I am fiddling with the code here: [URL] I had a couple errors when I copied/pasted it into my project. I dimmed a couple variables, now the squiggle lines are gone, but I'm not sure how to call the functions in the project? Do I use a Lable or a TextBox? How do i make this work?
[Code]...
i wanted to use streamwrite i use System.IO at the top of the code. What do i use if i want to use the E-Mail capabilities of the program?Does it matter what e-mail program u use as to what Process to call?I know that MAPI whould be there somewhere but unsure.
View 4 RepliesI have a Util module in my VB.NET program that has project-wide methods such as logging and property parsing. The general practice where I work seems to be to call these methods directly without prefixing them with Util. When I was new to VB, it took me a while to figure out where these methods/functions were coming from. As I use my own Util methods now, I can't help thinking that it's a lot clearer and more understandable to add Util. before each method call (you know immediately that it's user-defined but not within the current class, and where to find it), and is hardly even longer. What's the general practice when calling procedures/functions of VB modules? Should we prefix them with the module name or not?
View 3 RepliesI have the same intention as in this question:
Automatically call all functions matching a certain pattern in python
But I needed the solution (if technically possible) in VB.NET. Is that possible in VB.NET ?
say you have a sub containing an io.streamwriter. That streamwriter is declared and used only inside that sub (and not as static). Should you still call dispose on that streamwriter or is it disposed automatically as it is no longer in use after that sub, until you call that sub again?
View 2 RepliesVisual Studio 2008, Standard Edition VB.NET I have only limited experience using the background worker, and all that I've done with it thus far was fairly straightforward and worked fine.
I am now looking to run a process in a background worker which calls various functions and/or subroutines, but of course it generates an error indicating that it's on the main thread (or something like that - I don't recall exactly, but that was the crux of it).
Im not exactly sure how to word this question, but I will give it my best shot.In a new program I am starting I would like to put all the code from a button_click event into a file (many others as well into different files), kind of like a class file in the sence of it being external.lets say I have a button called btnadd and it has some validation code in it Private Sub btnadd_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnadd.Click
[Code]...
I have several user controls which inherit from the following abstract class[code]....
View 1 RepliesMy problem is that I am creating system tools for windows with a good gui and I don't know how to start with it. One of my difficulties is making code for calling any window tools for example, defragment.msc, backup, system restore, registry editor(I knew there's already a thread in here but it is closed).In short, I will create a "Utility tools ALL IN ONE" for my project somewhat like a registry cleaner or advance system optimizer and the likes.
View 6 RepliesI have implemented webbrowser control in my windows application. I have some functions inthe class file. i want to use those functions from the webpage which is displayed in my windows app through webbrowser control..For example say... I have an standalone windows software. Which has a webbrowser control in the some form. Now i would like to create a webpage that can be displayed in the webbrowser control in win app which has some buttons and textboxes. When i click on button in the webpage it should get the version number of that software. I have some other functions that are in the class file aswell.. but dont no how to call those functions from that webpage when a button is clicked or something like that.
View 4 RepliesI have a midterm project where we must replicate what our teacher has made, it is a convenience store program. I am having trouble calling the functions, he wants us to use these:
PopulateItems => Populate Items listbox based on the category selected
GetItemPrice => Retrieve the price for a given item
GetItemPriceFromPurchases => Retrieve the item price from the purchases list box (optional. You may not need
[CODE]...
So far I have the first list box populated when the form loads. However outside of that I do not know where to call the function in order to populate the second list box upon selection of the first.
What I am trying to do is have a class where the functions of the same name are both instance functions and shared functions.
Public Shared Function Get...(byval xx as xx)
and
Public Function Get...
The Public Function uses a Property xx created in the constructor, whereas the Shared Function has the parameters (byval xx as xx).
How can I call the Click event of an array item of buttons? [code]I want to call the item 1.the Click event of an array item 1 of buttons?
View 2 RepliesI need to create unit testing project for my current website. The currentw ebsite si written in VB. All unit testing examples are using interface to create mock object. My current VB class does not implment any interface. Can I add interface and implement it to my current class and functions without affecting or changing codes to any pages in my website that call the functions? For examples my current class is like:
[Code]...
Stuck on resolving host IPs within a listbox. I want it to carry over the resolved IP's to listbox2. But also have an 2 radio options either to resolve IP to Hostname or resolve Hostname to IP. Thus when I hit the start button, it checks to see which one is selected and starts the process. Here is what I have found, but can there be a simplified version to this but for lists? [URL]..
View 1 RepliesI want to create a form that a user will enter information into. Once the user hits "Submit", the program will search through my db. I want the result to populate into a completely new form. I only need the info from one column in order to generate the entire record, but how do I carry the info retrieved from the search what the user selects into the new form in order to populate the new form.
View 4 RepliesI want to carry out bidirectional synchronization.I have implemented the code and procedures in the walkthrough however i have nearly a hundred forms and more than 50 tables how do i go about that
View 1 RepliesI am trying to rotate a select number of bits to right with click of a button. ( bit 7 to bit 0 and rotate.) The patterns should not matter. It could be any combination of set or reset bits. The bit patterns are selected by checkbox0 to checkbox7. I like to rotate without a carry bit. Is there any way(s) to do this?
View 6 RepliesI'm trying to add the original pictures to my vb.net program.When the client computers install the program there should have the original pictures in their computers.And other programs, not this vb.net program, can deal with the picture. Better to get the picture fullpath ,something like D:program filesabcody.jpg.
View 8 RepliesI am facing a problem in my code. I am working on an application in vb.net, its a windows based application. On one of my form I need to perform so many data driven operations.
if I press tab on one of the text box, I need to set a computed value in other text box and need to set the focus to that text box.
I write a code that is a like to this.
Private Sub TextBox1_KeyUp(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles TextBox1.KeyUp
Select Case e.KeyCode
[Code]....
Is there a way to call functions within a class upon instantiation of that same class? Basically, I have functions within a class, but I want to automatically call some of those functions simply when there is an instance of the class created.
Basically, I have this structure:
Dim instance as new class
instance.function1
instance.function2
[Code].....
I have a piece of software with two tabs, inside each tab there are buttons (the user can add the buttons when they want). when tab1 is full tab2 should start to fill. I currently know how many buttons fit on the screen so I just say something like if buttons > 150 then start to populate tab 2 The problem i have now though is if the resolution is changed then a different amount of buttons can be displayed. so if I put my screen to 1280x720 some buttons are left of. I was thinking of detecting the resolution and then using different cases for different resolutions but this seems very inefficient im wondering if there is a different way?
View 5 RepliesI'm using Visual Studio 2008 on an XP machine and am trying to develop a web app that can interact with websites and carry out automatic tasks.One problem I have is trying to recreate the web requests for automatic interaction.
For example:I use a webBrowser control to allow me to surf a page manually. Then, once I am at a specific location, I'd like the automatic interaction to take over.Part of the website requires a log-in and exchanges cookie data.When I try to read the cookie info from the webbrowser control to build the subsequent automatic requests, the cookie content is incomplete.Upon further investigation, it appears that the site sets one of the cookies to "http only". This stops the value being visible to the webbrowser control.Is there another control or method I could use to retrieve this info?
Which is the most efficient and speedy data structure in order to carry out calculations on it?. I have seen, collections, arrays, list arrays, databases and more. I would prefer to write just straight forward code that will be effective and which I can still understand. What I would like to do initially is have the ability to add new draws to the end of the file, edit the individual files and delete lines if required.
File would then be reformatted to show the corrections made. Some kind of data entry window is envisioned. As far as number crunching goes, I would like to make counts of each number in each of the columns , calculating averages, times since last drawn and so on.
Without being too long winded, I would eventually like to find triple combinations and maybe use them as predictions. So there you have it. This way I won�t have to go off on the wrong path, on a data structure that may not be able, or be too slow for the tasks at hand.
1) Is it possible to access the Excel mathematical functions without actually opening Excel?
I was thinking of through a DLL WinAPI call or maybe a delegate function or smaller program?
2) Does anyone know of a MS link or area that gives instruction on "how to" use every function of every Windows DLL at all?
Or for all those that Microsoft have chosen to document online at least.
While converting types, I have found myself using both VB functions and BCL Convert.To* methods.
E.g.)
Cstr() vs. Convert.ToString()
CInt() vs. Convert.ToInt32()
CDbl() vs. Convert.ToInt64()
etc...
Are there any subtle differences that should be noted?
Is there a way to see exactly what the functions are doing. What i mean is there a way to see the class? I know what it does, i just want to know the code.
For example the function: Membership.FindUsersByName()
I have an asp:table which I want to exported to excel. One of my fields are alpha numeric and when exported to excel the leading 0s are stripped off. After going through this thread: Validation (CSS 2.0): 'mso-number-format' is not a known CSS property name I would like to use the css method "mso-number-format:@;.But the css is not exported to excel. I just tried to test it with simpler css things like bold font etc but its not getting carried over. I can see that if I surround my asp:Label with tags this change gets carried over to the excel but not the css bold . Other solutions in other thread does not work for me as ="00111" shows up as desired in excel but in the web form it shows up as ="00111" which is not what i want.
View 2 RepliesLet's say you have a user class. When the user is logged in there are properties representing basic user info, an associated address and, say, 5 profile pictures, the last a generic lsit like this: Private _photos As List(Of Photo). However, instead of carrying the weight of the profile pictures in a session vairable, to reduce resource usage, I only want to populate them if the user needs to acces them. So, for the most part, the generic list of photo's is empty. Will it carry weight anyway? I'm trying to decide if I should just not populate ituntil needed, or if I should create an alternative "light" user class which doesn't have this property.
View 2 Replies