Sending A File Via COM PORT?
Jun 10, 2010I have only finished about sending string via COM.
View 3 RepliesI have only finished about sending string via COM.
View 3 RepliesI'm writing a simple application that can send e-mail;
Must I specify the Port, along with my username and password for the message to sent?
have gps constantly sending data but can read it from the com port
View 5 RepliesI'm working with a device using the serial port and i am sending a command from the pc to the device like this:
1. I Change the parity to mark
2. then send a byte
3. then Change the parity to space (here is the problem)
4. Send a lot of bytes
but the device just ignores all the last bytes, im pretty sure its a timing problems, so a timeout occurred attempting to send a command, how can i change the parity without losing time?
I'm working on a project that involves sending information through a GSM module, this module is connected to the system through a USB port. the information to be sent is gathered from a database using VB, now I need to send the information from my VB program to the USB port for onward delivery to the GSM module.
View 2 Repliesi am doing a project in vb 2008 .net.during execution of the code, a different number is generated every second. the numbers are either 0,1,2,3,4, or 5. how do i send this number every second to the serial port. at the serial port i have a microcontroller connected which should accept this number and light up an LED coresponding to the number received.
View 1 RepliesI am trying to send a command through my serial port to a external device. The format of the command frame is, more or less, like this:
'0x0A 0x03 0x20 0x00 Checksum'
What I've written on my code is just this:
VB code
num_dec = &HA + &H3 + &H20 + &H0
checksum = DecToHex(num_dec) '2D
data=&HA & &H3 & &H20 & &H0
SerialPort_RFID.Write(data & checksum)
The problem is that when I stop the program on the Serial...Write line, I see that the data I sent is on integer format instead of Hex format.
When i try to send the &HBB value through it just sends a &H3F value i think is an error character i use this code:
SerialPort1.Write(System.Convert.ToChar(&HBB))
I am able to send other ascii character using this but i really need to send this &HBB value through serial port.
I'm trying to control a serial port device that both send and receives data. I can receive data quite happily from the serial port but I don't appear to be able to send data to the device. The device works perfectly as I can test it using putty, I open putty select serial and select 1200 baud, the device immediately lights up and can send and receive. However when the port is set up and opened in VB the device doesn't light up so I can't send data to it but can receive data from it. According to the instructions I need to send either ASCII 'X' Hex '$58' or Decimal '88' to make the device ready.
Code (VB Studio 2005) :-
Public Sub New(ByVal synchronisingObject As ISynchronizeInvoke)
ComPortUsed = My.Computer.Registry.GetValue("HKEY_LOCAL_MACHINESoftwareNJB", "COMUSED", Nothing)
PricePerTrack = My.Computer.Registry.GetValue("HKEY_LOCAL_MACHINESoftwareNJB", "PRICETRACK", Nothing)
Me.synchronisingObject = synchronisingObject
[Code] .....
im interested on electronic and i working on my final project i not to experienced at VB so can anyone figuring this out i really need this , if there was any advance from this forum.
View 2 RepliesI am sending data into VB through a serial port on my computer, from a microcontroller. The data enters VB in an ASCII form, but I need it as a number. I can use the Asc command to convert numbers 0-127 however after this it dosent work. I believe this is becaus the ascii character map only goes through 127. So how can I convert the rest of the data (128-256) to a numbers?
View 3 RepliesOpening and closing the port works fine, and as far as i can tell, the serial.write("blahblah") should be writing to the output buffer, but I am unable to test or verify this by reading it in. the commented "Receive data from serial port" and subsequent DoUpdate() function are where i am having trouble. It doesnt seem to actually be reading in the data if it is in fact writing it correctly.
[Code]...
I'm using 2008 Express and I'm trying to send 1 byte of data on the serial port.
Serialport1.write(123) Sends 3 bytes with the ascii codes representing 1 2 and 3.
I want to send 1 byte that contains 123.
I have a very basic knowledge of coding, just enough to understand some PicBASIC Pro and program a microchip to send the values of some variables to a PC via the com port. I've used a terminal utility like Hyperterm to confirm the right variables are being sent, so I thought it would be cool to have a custom application on the PC to display these variables, and possible set them via the application by writing the new one back to the PIC. So I downloaded VB express 2008 - and whilst it was "simple" to draw a box and add a few text boxes I'm lost at how to actually do anything practical with it
[Code]...
Could someone advise me in laymens terms exactly what I need to do inorder to populate the text boxes with the data from the PIC micro. Whilst I understand the basics about BASIC, I have no idea on things like classes etc
I ran into this problem while trying to write a Pan/Tilt/Zoom controller program. I found some very complicated examples, but managed to put the pieces together into this simple test program.I first import System.IO.Portsthen I define a new serial port and give it the required parametersI open the com port when the form loadsI have two working buttons, one to pan left, one to stop panning. The hex commands are pre-configured.The one for Stop is A0 00 00 00 00 00 AF 0FThe one for Pan Left is A0 00 00 04 14 00 AF 1FI declare a byte array to contain the command bytes and put them into the correct position.
Code below:
Imports System.IO.Ports
Public Class Form1
[code].....
I am working on writing a program that needs to send a command to a specific port on the same computer, I have that working fine. There is another piece of software running that is listening to that port for some commands (read on).
Dim myTcpClient As New TcpClient
myTcpClient.Connect("127.0.0.1", 61225)
Dim networkStream As NetworkStream = myTcpClient.GetStream()
However when I try to send a command I get no response...
Dim outStream As Byte() = System.Text.Encoding.ASCII.GetBytes("0x33")
networkStream.Write(outStream, 0, outStream.Length)
networkStream.Flush()
I have been given a list of protocols that I need to send to that port. What I have been told is that the size (in byes) is 1 and the value is "0x33" with no parameters. I am completely new to sockets and sending data through tcp.
I like to compress the xmldata before the data is provided to the client as an excel file. I am trying to compress and deliver it as a .zip file. its not working Here's my code below. I tried compressing it, converting it to bytes etc etc. The issue with below code is, the XSL transformation is not happening properly and the output excel file is raw xml with some .net exception at the end. (that's what I see on the .xls file that's downloaded at the end) Before I started working on compression my below code was working fine that gives properly formatted excel file from the xml input. the excel file is so nice you can't even tell it was from XML.
[Code]...
I'm mohammed from Oman ,I'm visual studio.net programmer How I can Read the Data From Barcode Weight scales By Serial port and TcpIp port
View 7 RepliesI have a Windows form.in windows form have a combo box that give me a list of available port serial with it code (Dim ports As String() =SerialPort.GetPortNames())for example( Com1,Com8,Com15,...).but I want to give me fullname of serial port in device manager for example in dvice manager is these (Comunication Port(COM1) - Printer Port(LPT1) And USB Serial Port(COM8)).how to Get it?
View 2 RepliesI would like to detect the Address and Port number of the Parallel Port in computer.
View 4 Replies[code]...
Im not talking about a database...Just a way to send files from one computer to another.
I know there are lots of examples here on the forum, but all to difficult to understand.I have a client:
I have a client:
Imports System.Net.Sockets
Imports System.Text
[code].....
I have an XDocument ready to be sent out via Network stream, what do I need to get it working? I am connected via networkstream and can send regular text, but I don't know how to send an XML Document, I use the networkStream.write() function to send in text.
View 2 RepliesI need to send text from 2 text boxes(TextBox1 & TextBox2) to a .txt file on seperate lines.
View 7 RepliesI am trying to Send an Email with an attachment (using Gmail) but I keep getting errors like "Operation Timed out" or Failure Sending Email". It was working earlier today but I found out that i needed to add Using statement because the email was having a file open that had to be deleted after it was sent but afterwards it doesn't work.
Here's what I have (Portion of it):
Private Sub SendMailOneAttachment(ByVal un As String, ByVal pass As String, Optional ByVal smtp As String = "smtp.gmail.com")
Using oAttach As Net.Mail.Attachment = New Net.Mail.Attachment((Environment.GetFolderPath(Environment.SpecialFolder.LocalApplicationData) & "\" & My.Computer.Name & "_" & fName & " .zip"))
Dim client As SmtpClient = New SmtpClient(smtp)
[Code] .....
The ports are correct I believe, no firewall up on my PC...
I just want to know is it possible to send a file to COM port and receive a file from COM port?
View 1 RepliesIf I uninstall the COM1 and reboot, it works. If I shut down (power off) and restart, I get the message below. If I uninstall then click on Scan for Hardware Changes,The given port name does not start with COM/com or does not resolve to a valid serial port. Parameter name:portName
View 8 RepliesIm new with vb2008 and i wanted to know if i file is in use before sending it via ftp
View 2 RepliesA certificate is required to complete client authentication.I am sending an XML file to a remote server.[code]
View 1 RepliesI have created window service and one window application which is running as notify application in VS2010 using vb.net both are different project.
I want to pop up message in notify application when window service download some file to local system.
means,i want to send message to notify application when ever window service application download file to local system.