Setup Project With Crystal Report Runtime?
Jul 13, 2009
I have a simple application with a crystal report in there. So, the crystal report runtime must be installed on the clients which use the app. Now i have create a setup.exe and under "Required Components", Crystal Reports Basic... is marked. I choose the second option below that Crystal Report should come from the identic folder. When i call the setup.exe or the *.msi file the app is installed under programs but without crystal reports.
View 2 Replies
ADVERTISEMENT
Apr 19, 2010
My windows app works fine in my pc. Once I created a setup project and then install in a client pc, there is an error to load Crystal Report.How to add Crystal Report in setup project? (I added all dll file associated with Crystal Report but did not work)
View 1 Replies
Oct 9, 2011
I would like to add an image to a crystal report at runtime.
I am currently doing this using a second data table containing only a byte field and then a blob field on the report. However this feels like a hack and if there is no data in the first primary table then for some reason the image does not show.
Is it possible to add an image with code or another method?
I'm using crystal reports for visual studio 2010. Winforms project. Either C# or VB.
View 1 Replies
Jun 15, 2011
I have an application written in VB.net using VS2010 that I am ready to deploy. The application uses an access (2003) database, the .net 4.0 framework and Crystal Reports. I have generated a setup project which works fine when deploying to systemsthat have the runtime for CR and Access and .net 4.0, but I will need to deploy this to systems that do not contain all of thes "pre-requisites", and may not have a
View 10 Replies
Jun 3, 2011
I am using Microsoft Visual Studio 2008 and want to design my Dynamic crystal reports. In vb6 i normally did this via bounding each control of the section1 ,2 or 3 via run time code by giving the name of that control something like
.section3.controls("txtName").text=some value
can I did the same with crystal reports as well in VB.Net if yes than how.?
View 3 Replies
Aug 25, 2011
I have 6 to 7 tables with state information in them. They all have the same field names. I have a Crystal Report that is based on one of them. I want the user to be able to select a state and change the Crystal Report to use that table instead of the one it was based on.I mean when user select text in combo box and then click on "OK" then report show (using only one rpt for all the tables of same fields).i have the database name"Rajab" in which the all the tables have same fields and structures now the problem is that i have designed an rpt now i want that if user select any table from the list of combo box then through this rpt the data of every table shows. how can i use that rpt for every table because i don't want to use seperate rpt for every table i want to use only single designed rpt for 6 to 7 tables.
View 2 Replies
Aug 26, 2010
I have to change my sql server and need to point all my crystal reports to that new server at runtime, some reports has StoredProcedures embeded inside and those are the problems.[code]....
View 2 Replies
Feb 21, 2009
I have a report and is working with .netnow i needload images in runtime by passing the values in .net or load the image by dbthe control that i using isthe crystal report viewer, i have found codes in the web that refer this:
"crxReport.Sections(3)""CrReport.Sections("Details").ReportObjects("Picture1")=? "
but with the control what i using i dont have that option :(what is the control that i need load to the project that have that options?or is some especial version of crystal report?
View 2 Replies
Mar 15, 2012
Can any one provide me with the Crsytal report runtime installer for Visual Studio 2010.I have the installer of Visual Studio 2008 but its of no use.I need the installer that is the .msi file.
View 3 Replies
Jan 29, 2012
on first form one textbox and one button present and in second form crystal report viewer is present in first form textbox i write query and when i click on button i want report in second for with data returned by query
[Code]...
View 4 Replies
Dec 22, 2008
trying to simply change the Server Name for a Crystal Report at runtime and it will not let me. Herthe code below. The database is identical to my development server database. I use SQL Server 2005(SPK 2) and Visual Basic 2008. I use Crystal Reports 2008. When I run the code it accepts changes to the user name and password but igmores any change to the ServerName or DatabaseName
View 5 Replies
Jun 19, 2010
I want to hide or show Drill down Details section in crystal report while runtime. Maybe a checkbox from a from a form or soemthing like that. How can i do that.
View 1 Replies
Jun 22, 2010
When i make Setup of my project then my crystal reports keeps old database path how can i resolve it please help me.
View 2 Replies
Mar 4, 2009
I'm struggling to create a crystal report in a VB project,The objective of the report is to return one row of multiple database tables.
This is working by a parameter selecting an ID number in a CASE table, the CASE table contains some forgien keys related to CUSTOMER,ORDER tables etc.., i want to select these forgien keys and return the one row that they relate to in the different tables i.e get all the data from the CUSTOMER table, from using the forgien key, without having to enter another parameter.but am struggling with the syntax.
This needs to be dynamtic, as any ID number able inputed.
so far all i have got is ...
({?CaseID} = "ALL" OR {Case.ID}={?CaseID})
which simple reurns the single row in the CASE table.
View 4 Replies
Jan 31, 2010
I am creating a visual basic project for class. It is all running as intended though I am not sure how to set up the login to database function. When you click the link for the specific report it should display the page. But I get a login to database page. I am just wondering how I set that up so that one can actually see the information. ie:
[Code]...
View 1 Replies
Jul 17, 2009
I'm trying to add a Crystal Report to a VS 2005 VB project.Here's what I do: Right-click on my project, Add -> New Item Crystal Report Add a report with the standard report wizard (or just a blank report
[Code]...
UPDATE: OK, something's really screwed up. When I inspect the Me object above, it isn't even putting out the kind of object I expect. I think I may need to piece together the solution again.
View 1 Replies
May 6, 2010
I have a vb.net 2008 project . when i open this project in my labtop is very slow loadin , open a form design
View 1 Replies
Apr 6, 2011
When I open a Crystal Report in Visual Studio I can view options for how the fields are formatted such as the date and numbers. I'm running a crystal report in a project, is it possible to edit these settings through code?
View 1 Replies
Jun 21, 2010
I m using .net , I create some temporary tables at run time, how to print these table data thru crystal report
View 1 Replies
Jun 23, 2009
Iam workin wid crystal reports have a problem i jus want to create a crystal report dynamically not by using crystal report wizard rather by using a blank crystal report and connecting to the database server and generating the report from the database manually....
View 1 Replies
Jun 12, 2011
i am having a Visual Studio 2008 but it not install with crystal report when i open add new item-> its didnot contain Crystal Report how can i add crystal report and make crystal reports in visual studio 2008 how i install crystal report with visual studio 2008 only crystal reports 2008 install and its open with visual studio 2008 when we click Project->Add New Item-> and crystal reports shows in thiis file
View 1 Replies
Jul 16, 2009
I plan on designing a Crystal Report, and then calling it through VB.NET code. Will the end-user need a Crystal license in order to use the crystal report part of the program?
View 1 Replies
Aug 15, 2011
When i pass the parameter and run the report it works fine as i close the form it closes the form is there any way so that i should be able to close the crystal report viewer and pass the parameter again and should be able to view report again.
View 1 Replies
Dec 30, 2010
I got a problem I want to print a report which is receipt having size 3 x 4 cm. i am unable to resize crystal report. i am using crystal report coming with visual studio.net 2008.
View 1 Replies
Jun 5, 2011
I have created an application using vb.net 2008 and for reports Crystal Reports Basic for Visual Studio 2008 but the problem is, when I run the application in another machine away from developing box, I get the Load report failed notice. I don't have any idea on how I should approach this issue. I tried installing the CRRedist2008_x86 and CRRedist2005_x86 but still the problem won't go away.
View 3 Replies
Dec 2, 2010
I'm having a problem with my crystal report with regards to report footer. I want to display the data from the table, column name "Remarks" in report footer but when I try to call the data it doesn't show the remarks. I'm using VB 6 and mdb files as my back end. Is there any command or fundamental that I've missed?
View 1 Replies
Jun 21, 2010
I had created 5-6 crystal report in my vb.net project with back end sql server 2005 and i had given my path for crystal report. after this i had creted setup and deployed at customer machine but there it dosn't shows any report instead of it gives an error. for viewing report so how to come up with this probelm.
View 7 Replies
Jun 5, 2011
im trying to fetch rows in 3 TABLES using JOined Queries.im tried the query first in MS ACCESS and it worked but when i tried to show it in Crystal report it wont show its data. [code]
View 7 Replies
Aug 14, 2010
I am working on a windows application in VB.Net 2008. I have added a crystal report in my project. and I have draw a Crystal Report Viewer to view the report. But when I run this report It asks user name and password. (The snapshot is attached here) I have used the following code to set the log on info of report.
[Code]...
View 1 Replies
Dec 16, 2009
<Visual Stusio 2005 visual basic / Crystal Report 2008>
I simply created a "Report" folder on the the project and "crTxEmpMaster.rpt" is created on the "Report" folder.I tried load a .rpt file for Crystal Report, but it occured "Load report failed" What is wrong wth it? #1 and #2 both failed.
Dim menuReport As New ReportDocument()
'#1
Dim reportPath As String = Application.StartupPath & "" & "ReportcrTxEmpMaster.rpt"
[code]....
View 6 Replies
