Is there a way of stopping the main page waiting for a usercontrol to load before it can finish loading?
I have a usercontrolthat has to do a lot of DB calls which can take a few seconds making the page slow to load. Ideally I'd like the main page to load straight away and then the usercontrol content appear when it is ready.
I have been tasked to do a project, and have been given a list of links from the client - what the Project needs to do is:1 - open google with a specific search phrase - no problem2 - look on that page for any links containing any member of the list of links, if found, invalidate the entry in the list, and auto-click the link, then go back3 - repeat for any other "finds" on that page4 - when done, auto-click on "Next" (no problem) and go back to step 2For now, I am not even attempting to auto-click the found link and go back, I am just listing all found links in a TextBox. The problem I am having is waiting for the next pages to load before looking for a match in the list of links. I tried using webBrowser.DocumentCompletedto set a Boolean - I tried testing WebBrowserReadyState in the DocumentCompleted event ar the code below gives the best results but it is inconsistent, meaning it completely misses some pages that I know have links on them that match.
View 6 RepliesI typically write my own servers, javascript, etc in vi. I've been given a project to enhance a VB.Net / ASP.Net application and I'm having some troubles figuring out how to get the user control to render BEFORE the page finishes loading.When I use normal browser as the viewer, everything works OK. When I try to use generate the page as a report, the report generator spits out the PDF while my JavaScript graph drawing stuff is still in it's initialize functions.They are using EvoPDF as the PDF generator. It appears the page is being considered complete after the page is loaded but before the javascript is executed.I admit I'm a bit lost when it comes to ASP.NET, but I know HTML/HTTP/JavaScript very well.How can I force the page load to wait until my usercontrol finishes rendering?
View 2 RepliesI am trying to make a marquee progress bar run while my long function is running. When the function is done running, I want the progress bar to disappear.
[code]...
If I don't do t.Join(), the progress bar disappears right away and then the thread runs. If I do Join(), the progress bar doesn't appear until the message box pops up after the thread is done!How would I get the effect of the progress bar running while the thread is running and then stopping when it's done?
I need to let my webbrowser finish loading before continuing. the problem is, i have the stuff that needs to be done in a do loop, so i can't use documentcompleted.
i currently have
Form2.wb.Navigate(url)
While Form2.wb.IsBusy = True
'do nothing
End While
to check if the webbrowser is loading, but it doesnt really work.
In my DoWork() function I register with our sip server. Then I have to wait for a response back. However, the response I get is received in another event. However, before I am able to check the flag in the DoWork() the DoWork() has all ready finished and the response comes after.
I am trying to find a way to wait in the DoWork() until I get a response in the Diagnotic event. I have a global flag that is set in that event that I have to check in the DoWork().I was thinking of maybe blocking in the DoWork() until the other event is finished. Maybe using a join.
' Do work in background worker
'Will return less than 8 if there are no error message from the library
If (Not Me.bgwProcessLogin.CancellationPending) Then
' Register and wait for response
[code]....
I'm writing a simple program that takes a screenshot of tab1 of the GUI, then takes a screenshot of tab2, then tab3, etc. I've got the screenshot code down pat, but the problem with my current code is that it's taking the screenshot of each tab before the screen has a chance to fully redraw, so the resulting images are screwed up.Is there a way to get the program to wait for each tab (and all the controls in it) to be fully visible before each screenshot is taken?I'd like to avoid using a timer for this, as the screen redraw speed will vary depending on the user's computer, and the contents of each tab, etc.[code]
View 2 RepliesCan you kindly tell me why I am getting a runtime exception when trying to run this code?
[Code]...
I'm currently making a Computer Cleaner, my program launch's rundll32.exe's to clean IE's history.
Like to clear the add-on settings I would put:
Shell("RunDll32.exe InetCpl.cpl,ClearMyTracksByProcess 4351")
But I need to wait for it to wait before letting it to go on to the next thing like clear cookies, which would be: Shell("RunDll32.exe InetCpl.cpl,ClearMyTracksByProcess 2")
I would like to execute an external program within powerpoint after the presentation has loaded so i can see if its working. In short my overall objective is to execute the external program which will open up the command prompt and use the sendkeys method to sendkeys to command prompt which help it to run a script at the correct time (which is after presentation is loaded).
View 9 RepliesI have seen people use the code
Do Until WebBrowser1.IsBusy = False
Application.DoEvents()
Loop
or use the WebBrowserReadyState however, this doesnt seem to work after I invoke a member For example, I use "invokemember("click")" and then after that, use the WebBrowser.IsBusy or ReadyState, and do another InvokeMember, it doesnt work. It seems after I invoke a button and it navigates, it doesnt seem to matter?
I have a picturebox and the image will be from the web
I want when the image is fully loaded inside the picturebox , then go to the next step
I am using Visual Basic 2005. The program I am creating can either bring up a form (with a bunch of buttons, listboxes and a picturebox) and the user can enter file names onto the form OR the user can drag file names from Windows Explorer and drop the names on the program icon to start the program. During the execution of the program, messages are displayed in one of the listboxes.
All this works fine except for part of the drag/drop scenario. When the drag/drop is done, the form is not fully loaded when the code function starts to put out messages. This means the user may not see any of the messages until all is complete. I have tried putting my executable code in the Form1_Shown() and even added a timer to slow things down a little, but nothing seems to work consistently.
I'm trying to login to a website wait for the page to finish loading then navigate to a page in this website.
Here is what I came up so far
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
WebBrowser1.Document.GetElementById("nickname").SetAttribute("value", "user")H
[Code] ......
How to use the documentcompleted?
I need to get the url of the webpage the webbrowser is navigating to, but since the code executes faster than the webbrowser navigates to the webpage, it gets the url of the last page. I cant use DocumentComplete Event because i have a tabbed browser,
and i cant write events because im creating tabs(with webbrowsers) at run-time. So how would i check to see if the webbrowser has loaded a document?
an application i developed using vb 2008 express, to fill a web form with data from an access database, one after another when a button is clicked hasn't given me what i expected. the loop was suposed to stop after filling web form with the first data on clicking a button and continue to fill the webform with the next(2nd) data from the database on clicking the button again. Below is the code i wrote
Private
Sub STARTButton_Click(ByVal
sender As System.Object,
ByVal e
[Code]....
I have a custom UserControl that contains just one TextBox. When I set the control to Enabled = False, the TextBox is disabled but the control is not (control still fires the Enter event).
How do I ensure that the UserControl will not receive focus?My Enabled Property Looks like this:
Private _Enabled As Boolean = True
Public Shadows Property Enabled As Boolean
Get
Return _Enabled
End Get
[Code]...
I have an web application of 200 web pages and all has a single master page. Most of the content pages use AJAX controls so most of content pages has its own ScriptManager. Now I have a requirement to add a link with HoverMenuExtender control and for that I need to put ScriptManager in the Master page, but it is working only in the content pages where there is not ScriptManager.
View 1 Repliesis there anyway to get the page source with out complete loading the page?
View 3 RepliesI've created a usercontrol in VB that handles paging more efficiently than the DataPager (at least for very large datasets). I'd like to use it in a C# project, but I've been having trouble getting it to work.I've tried simply adding PagingControl.ascx to the C# project, but when I do that the markup and VB code behind don't seem to see each other. --Is this a namespace issue?I've tried adding the PagingControl.ascx to its own VB project, then adding that project to the C# project's solution, as well as a reference. --That almost works. I can register the PagingControl usercontrol in the markup. I can access the usercontrol's properties in the code behind, but any property that involves the UI of the usercontrol fails.
Its seems as if the usercontrol's form hasn't had a chance to load by the time the C# page's Page_Load event handler fires. --Maybe this is an "order of operations" problem? At what point in the C# page's lifetime should a usercontrol's form be loaded?
I have a page with three radio buttons and a calendar usercontrol. The radio buttons have autopostback and depending on which one you click it should change the calendar availabilities based on the selected index.The problem is that the page load of the calendar is executing first before the selected index change (where I am setting the needed id).
View 1 RepliesIs it better to perform data access operations on the page and then populate the properties of each usercontrol with the retrieved data. Is it better if each UC calls the business layer and pulls its own data independently without having to depend on the page.Existing Conditions:
1. Any information (Querystring, URL, etc) that the page would use for data access is also available to the individual UC's
2. Both solutions utilize caching.
My coworker insists that the first option is better since Data access only happens once on the page. The second option seems more logical to me since it will allow me to place the UC on another page without the need for any additional wiring on the page itself. The page and the UC are truly decoupled.
I need to rewrite a number of ActiveX controls as VB.Net UserControls to embed into HTML pages. I have been trying to get a simple example working for the past 2 days with no luck. The control appears to display as a multiline textbox when the the HTML page is rendered in IE7.
I'm using VS 2008, .Net Framework 3.5, VB.Net
Attached is my code, the HTML page and the output.
VB Code:
Namespace MyActiveX
Public Interface AxMyControl
Property UserText() As String
[Code].....
I'm not able to find my answer from threads.I want close the loading of web page when it take more of tot seconds...(if is possible with a Firefox or IE)
StrAdrress = "http://www.google.com"
Try
System.Diagnostics.Process.Start(strAddress.Trim)
Catch ex As Exception
MsgBox(ex.Message, MsgBoxStyle.Critical, "Error")
End Try
Threading.Thread.Sleep(50000) So you can see I wait 50 seconds now..Is it possible to convert this code in : if the page not load in 10 seconds, stop load,close the tab and open another tab with another address?
I would like some code to execute at the "preload" stage of my usercontrol's lifecycle. However the preload event is only available on the Page object. So, I added the following method to my usercontrol:
Private Sub Page_PreLoad(ByVal sender As Object, ByVal e As System.EventArgs) Handles Page.PreLoad
However, I know get the compile error: "Handles clause requires a WithEvents variable defined in the containing type or one of its base types".
As the Page property is inherited from UserControl I don't see how this can easily be done.
I have a problem, I have to stop one Loading class on button click. I already checked some forums related to this. But didn't find an exact solution.
For example:
Public Sub LoadDropDown()
Dim it As Integer
[code].....
How do I get message box to stop loading new form I have the following code on a button that loads new form
h
If Me.File_Name.Text = "" Then
MessageBox.Show("No DataFile Has Been Selected", "Please Select a DataFile", MessageBoxButtons.OK)
I want to stop loading the form is the message box appears
I have a button in my usercontrol. When that button is clicked I need to call a method thta is in aspx page.
View 2 RepliesAccess objects on a dynamically created UserControl an a dynamically created tab page. I can usually find the answers to most of my questions via the Google Gods, but not this time. I hope the collective that is StackOverFlow can help! I have a form that has a TabPageControl and on that page a collection of labels and text boxes via a usercontrol.
On the form I have a button that allows the user to create a new tabpage, when the code adds a new page, it automatically adds the UserControl collection, all good so far. I can't get my head around how to access the objects on the newly created tabpage. What I need to be able todo is take the index of the tabpage that has focus and translate that against the UerContol name, but I havn't a clue how to do it! [Code]
I built a specialized userControl using VB2008 (on XP 32-bit) to embed in HTML (not ASP!) and compiled it, pointing to x86 CPUs. I added the necessary keys to the registry (see attachment) to declare a classId in a HTML 'object' tag. This scheme works OK on all 32-bit OS I could put my hands on, but fails to load on 64-bit: I could test only on XP and Win 2003. No error message and Fiddler does not even know something happened... I installed VS2008 on the XP 64-bit machine and ported the code to a fresh userControl (to check the code). I got the userControl running on this workstation without any trouble. I copied this new DLL on another workstation and added the necessary keys to the register, but to no avail. I checked the registry and the 'Wow64' keys are there allright. As a check (and to provide you with a 'working' example), I:
- built a very simple userControl on the 32-bit environment (label, textbox and button to display the text in a mMessage box),
- on the 32-bit workstation:
+ copied the file to a 'program files' folder,
[Code].....