StreamReader / Writer To / From A Text File?
Sep 28, 2010
I've Googled this for a long time but I haven't come across an answer...or I didn't realize it if i did. I need to create an advanced clipboard that will allow you to save 50 phrases for later use. It will have 5 tabs, 10 phrases on each tab with a button next to each phrase to copy. So, the user will open the program; click the appropriate tab then click the button next to a phrase to copy it to the computer's clipboard so they can paste it somewhere else.
[Code]...
View 4 Replies
ADVERTISEMENT
Jul 9, 2009
I'm writing a program that basically loads an entire text file into a streamreader variable, then reads this variable line by line and parses and writes a line into a new text file. I'm VERY new and my knowledge is mostly self-taught, but I can't seem to get out of this one. It works for smaller files, but it appears to reach a limit in characters at some point because in a file of 900 lines, it stops writing about halfway through 800 and there are no errors, the program actually completes and the message box pops up.
There are a few things with this code I already know I should fix, such as creating the new text file name, it's messy, I just don't know how.
Private Sub btnProcess_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnProcess.Click
Dim IndexValues As String()
[CODE]...
View 10 Replies
Dec 14, 2010
I am having problems getting my program to write to a txt file and also read the info in the file.The program does look for the file and throws an error if the file does not exist but it does not read or write the user info from/to the file. The program does everything else I need it to with this exception.[code]
View 3 Replies
Mar 11, 2010
I was able to code a sub that opens a StreamReader and Writer. The Reader reads a *.txt file and the Writer modifies it line by line as it's entered into the memory then writes it to a temporary file which is then copied over the file that the Reader read.
The problem is that the StreamReader and Writer seem to fail to close.At first when I tested it I would get an error stating:
Object reference not set to an instance of an object
I put breakpoints in the sub to figure out where it's erroring out and it's erroring out when it does sr.close() and sw.close() (Reader/Writer.close())Here's the code for the sub. Maybe someone can tell me what I did wrong.
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
If pDebugMessages = True Then MsgBox("Stream Reader/Writer initialized.", MsgBoxStyle.OkOnly, "Debug")
Try
[code].....
View 2 Replies
Mar 9, 2009
I have an asp page with vb.net code that will query a database and present the user with the number of records that exist that need to be exported along with a button to export them. After you push the export button, it will prompt for a location and filename. But after that, it will not refresh the page with the new counts that now exist. Or in this case update the count to zero for the button they clicked.
[Code]
So how can I tell the page to refresh with the new counts. It almost seems like I need to tell the process to wait until after the user has finished finding the location and saving the file but I don't want to add a generic threading.thread.sleep in, I want it to only wait until they are done and then refresh the page.
View 3 Replies
Apr 19, 2011
I have a problem with a streamreader in visual basic 2008.I am updating a database from text files on an ftp server. The streamreader works fine until the file is more than 100,000 bytes long.It reads until it reaches this point and then just ends. No error message, it just reads to this point which happens to be 2 fields out of 6 in the database stream. My question is - does the streamreader have a limit? And if so what is a workaround?
Dim connString As String = "Data Source=" & pDataBase
conn = New SqlCeConnection(connString)
Dim strQuery As String = ""[code]......
View 4 Replies
Jun 21, 2010
i would like to ask is there anyway to read a txt file with UTF-8 encoding using streamreader or filestream. the txt file is contain some extended ASCII that makes me cannot read the characters properly. I hav tried Encoding.ASCII.GetString(Encoding.UTF8.GetBytes()) but still it return wrong character when it's reading extended ASCII code.
View 2 Replies
Feb 15, 2012
I am making a simple application that will be able to store competition data into a text file that I have given a custom extension to on saving. Here is an example of the format that i have saved the data in.
Code:
[Comp_Name]Test Competition[Comp_Name]
[Location]Silverwood Lurgan[Location]
[Type]Teams[Type]
[Code]....
When i open the file, i want to redisplay the data in separate text boxes. Later on in the project i want to be able to search within the file for headings for example;
if "[Heat1]" is present then get all text between [Heat1] and [Heat1]
i am currently able to use the streamreader and open file dialog to retrieve the entire string of text fromthe however i am not sure how to go about getting the text between the headings I have used.
View 5 Replies
Jan 6, 2011
I'm trying to read through a large text file using StreamReader using the following code
Dim Fs As FileStream = New FileStream(Filename, FileMode.OpenOrCreate, FileAccess.Read, FileShare.Read)
Dim sr As New StreamReader(Fs)
Dim Line As String = ""
[Code]...
The process reads through the file and then exits the loop while only a third of the way through the file.What can I do to ensure it reads the whole file?
View 2 Replies
Jan 19, 2009
I'm using a streamreader to read a text file, in the text file i have some special characteres like "�,�,�", the streamreader doesnt return that characteres...
How to retrieve the correct characteres?
View 1 Replies
Aug 24, 2011
What I have stored in my file is values related to an account. (Just testing, not going to be used commercially). What I need is to draw the values for the username and password, by going through each new line, but .peek() doesn't seem to work for me.
My block looks as such :
public string CheckAccount(string username, string password) {
StreamReader sr;
string filename = "H:\AccountInfo.txt";
string s;
string result = "";
[Code] .....
My code doesn't read from the 2nd line onwards, it just hangs.
View 4 Replies
Jul 16, 2009
I have a problem with stopping line from being spaces.Is there a way to do this? The text sheet can look like this.[code]...
View 7 Replies
Jun 11, 2009
I have been working hard lately to build a database and well i have been experimenting with SFD, OFD and lately Streamwriter. I have finished and got streamwriter working as i want it to but know i need to be able to open the text file where all the data is stored into the one label, and not have certain pieces of text.I have attached a example of what the writer makes. The text which i would like removed when i open it is indented to the right
View 29 Replies
Mar 25, 2009
I'm trying to calculate an average no from data imported from a text file using streamreader. I'm not sure how the loop should read, and the result (average) I want to hold in a separate variable for future use.[code]...
View 1 Replies
Oct 15, 2011
I am currently writing a Login Script, and I am having trouble making StreamReader read a specific line in a text file. This is what I have so far (not the entire script, just the reader lines):
Dim path As String = Environment.GetFolderPath(Environment.SpecialFolder.ApplicationData)
Dim file As String = (path + "LogDat.txt")
Dim sr As New IO.StreamReader(file)
Dim line1 As String = sr.ReadLine(1) '' Supposed to read line 1
Dim line4 As String = sr.ReadLine(4) '' Supposed to read line 4
Dim line9 As String = sr.ReadLine(9) '' Supposed to read line 9
View 2 Replies
Aug 15, 2010
I am in the process (slow process) if learning vb.net by trying to create a simple application that will read and write (save) chosen information to a text file. The application has text boxes (name, email address, etc) and I want to read information from certain lines in the text and place in the given text box.[code]When I start debugging mode it does not display the text until I click onto the text box and it's displaying the first line of text in the file. How do I skip the first line of text and have it display the second line (or the 6th, 24, or whatever line I need to be displayed)?Then I can start working on learning to use streamwriter
View 6 Replies
Mar 11, 2010
I have a txt file that I need to read into a listview, but I need to read from a specific line in that file. Below is a sample of the txt file to read,
6400,3200,2,95.5,84,76.6,0
1,2,-20,15,0,0,0,"NO",0,0
TOTAL GPM= 6400 HWT= 95.5 CWT= 84.0 IWBT= 76.6 ALTITUDE= 0
CODE]...
View 1 Replies
Mar 30, 2011
how do you open a text writter? (&keep it open)?
View 4 Replies
Apr 17, 2009
how do you open a text writer? (&keep it open)?
View 1 Replies
Feb 15, 2012
I have the following basic code to read a text file from a StreamReader:
Using sr As New StreamReader(FileData)
Dim line As String = String.Empty
Do
'Error occurs on the next line after looping
'past the *last* line in the file...sometimes
line = sr.ReadLine()
'Some code here to parse and process the line
Loop Until (line Is Nothing) OrElse (line = String.Empty)
End Using
I tried changing the Do Loop to Do While Not sr.EndOfStream I tried checking If sr.ReadLine IsNot Nothing and a few other things but I keep getting the Cannot access a disposed object. Object name: 'SslStream' error after all 105 lines have successfully been read and processed. This code has been working for a couple of years, but there seems to be some issue with certain files (recently) that is causing this problem.
I opened the file and I didn't see anything out of the ordinary. No extra blank lines, funny characters or anything of the like. Just a normal file with 105 properly formatted lines. So even know there is something about this file causing the error, I need to obviosly handle this programatically.
What can I do to prevent the sr.ReadLine() line of code from throwing that exception that I have not yet tried?UPDATE Upon reading the last line of the file, the 'EndOfStream' property on the StreamReader goes immdeatly to: EndOfStream: {"Cannot access a disposed object.Object name: 'SslStream'."} It never toggles to 'True'. This makes checking for this condition problematic.
I think I have figured out why this issue only occurs sometimes: if I add in a blank line to the file at the end, none of this ever occurs. It is only when the last line of the file contains data. Still, I should be able to handle this programatically. Telling the vendor supplying the file to always add a blank line at the end should not be the solution.
View 2 Replies
Jul 9, 2010
I want to open a file with a stream writer. Delete it contains and write random data to it. And finally delete the file.
View 10 Replies
Jan 27, 2009
I am trying to make my application read data from a file. Then save the data back. However I keep getting an error which says the file is still open so cannot be edited. I also read that there is an issue with the streamreader and streamwriter do not close the program straight away. I was wondering if anyone had a way around this or any alternative ideas. Heres my code so far!
[Code]...
View 5 Replies
May 8, 2009
We needed an inter-process reader/writer lock.We decided to use a file and lock the first byte using LockEx and UnlockEx. The class creates a file in the system temp folder when it is created. The file is created with readwrite access and share read|write|delete.We also specify DeleteOnClose so we don't leave loads of temp files laying around. Obviously AcquireReader and AcquireWriter call LockEx with appropriate flags and ReleaseLock calls UnlockEx.We have tested this class using a small application that you can run several instances of and it works perfectly. The application that uses it has a problem, which we have managed to re-produce in another small test app. In pseudo code it is
Create InterProcessReaderWriter
Dispose InterProcessReaderWriter without acquiring any locks
Launch a child process which takes a reader lock
The first time this runs, it works fine. If you attempt to run it again, while the child process from the first time is still holding the lock, we get an UnauthorisedAccessException when trying to open the file.This appears to be a permission issue, not a sharing violation but all the processes in this test case are running as the same user.
View 2 Replies
Dec 15, 2011
I have formatted an invoice and saved it in a text file. In my text file i used TAB after every field, but when I am trying to print that text file using streamreader all tabs are disappeared. Can you please tell me how to retain the TABs while printing?
View 2 Replies
Oct 21, 2009
I am trying to use filestream and streamwriter / streamreader to have a simple text box where the text entered is written to a text file, and then a button can be clicked to read the file and present the text back to the textbox. It works, but the problem I'm having is that if i change the text to something smaller in length (less text) than what is currently in the file, then press the button to read the file, it still contains some of the old text that was previously in the file.
Dim strmReadFile As New FileStream(txtPath.Text, FileMode.Open, FileAccess.Read, FileShare.Read)
Dim readHandle As New StreamReader(strmReadFile)
'read the entire text, and set it to a string
Dim streamFileContents As String = readHandle.ReadToEnd()
[code].....
View 8 Replies
Jun 12, 2011
How do I know if I have reached the end of file using streamreader. My file has a lot of empty lines in it.
So if it try to use the following, its just stops wherever an empty line appears.
[code] while ( Not line is Nothing) do.... end while [code]
View 1 Replies
Dec 23, 2010
how does the streamreader read the file? how do you know where its up to? how does it read the file line by line, knowing where its read up?what program do you write so that it can read the file line by line and then put the text from the file into an array?
View 1 Replies
Aug 26, 2011
I am reading csv file via streamreader. Issue is that in csv file if if the data is like "Read" then steamreader the same data is coming as ""Read"". How to remove this extra inverted commas?
View 1 Replies
Nov 8, 2009
I am reading a file from the default location. I request a file by name only using an InputBox. If the User types a file that does not exist I get an exception error. I want to be able to handle the problem by outputting to a list box that the file was not found. My Code is something like:
sr = IO.File.OpenText(fileName)
IF fileName <> "found"
Handle issue
Else
Continue Code
I want to run a check to make sure the file does exist in the default location but not sure how to get it done. I had seen the Public Shared Function FileExists but I am not quite sure how to make it work.
View 12 Replies
Aug 10, 2010
I am making an encryption application using System.Security.Cryptography
View 2 Replies