Stron-name Assembly And Manifest?

Feb 13, 2012

I have used Express for a while and am running the 2010 trial full version at the moment. So I am pretty new to all the tools in the full version, and I am building my first dll that I need to embed a manifest in.If I add a strong name to a support dll I get this message

xx.dll is a strong-name signed assembly and embedding a manifest invalidates the signature. You will need to re-sign this file to make it a valid assembly.If I don't sign it I am told it is unabale to emit assembly because my support dll doesn't have a strong name.I found the post below in the c++ archives, and the thread sounded like what I was running into. I can't seem to find where to access Linker.

[Code]...

View 3 Replies


ADVERTISEMENT

The Located Assembly's Manifest Does Not Match The Assembly Reference

Oct 9, 2008

I've got an exception when I deployed my application: "the located assembly's manifest does not match the assembly reference" What I remember is changing the project name from the previous source code, does it affect that much?

View 1 Replies

Could Not Load File Or Assembly"project Name" Or One Of Its Dependencies.the Module Was Expected To Contain An Assembly Manifest

May 31, 2009

When ever I finish simple programs no matter what it is and i click to debug it it comes up"Error while trying to run project:could not load file or assembly"project name" or one of its dependencies.the module was expected to contain an assembly manifest"

View 4 Replies

IDE :: Assembly Manifest Error - App Failed To Initialize

Apr 10, 2009

I've been having an error with my Visual Studio 2008 with .net framework 3.5 Sp1. I am creating a project, and it would run properly until after a while when I try debugging the project I would get a error message that says:
"Error while trying to run project: Could not load file or assembly 'Name_of_Project' or one of its dependencies. The module was expected to contain an assembly manifest."

Also the .exe file that it creates in the bindebug folder gives and error that says:
"The application failed to initialize properly (0xc000007b). Click OK to terminate the application."
These errors after a format of the machine would disappear for awhile but not indefinitely.

View 4 Replies

Getting An Error : Generating Manifest. Could Not Load File Or Assembly?

Oct 28, 2010

I am using source safe to maintaine my code.Recently I copied my code to another machine.But everytime i build my project i am getting below error:Problem generating manifest. Could not load file or assembly

'D:WorkingFolderProjectSubFolderobjReleaseSubFolder.exe.manifest' or one of its dependencies. An attempt was made to load a program with an incorrect format.When i check above manifest file is empty (0k).I tried rebuilding (after cleaning solution) , also tried with copy pasting previus manifest file content.None of above solution worked.

View 1 Replies

Error Embedding Win32 Manifest: Manifest File 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727default.win32manifest' Cannot Be Found

Jul 30, 2009

Error embedding Win32 manifest: Manifest File 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727default.win32manifest' cannot be found.

Received with this code:

Public
Class HelloWorld
Private Sub DisplayHello_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles DisplayHello.Click
HelloWorldLabel.Text =

[code]....

View 2 Replies

Published Setup Requires Assembly CrystalReports 10.2.3600.0 In Global Assembly Cache

Dec 28, 2005

When running setup to install published program, the following message occurs: System Update Required: Unable to install or run the applicaiton. The application requires that asssembly CrystalDecisions.CrystalReports.Engine Version 10.2.3600.0 be install in the Global Assembly Cache (GAC) first. This version is listed in the references of the program and in my mind, be included in build. How do I get by this error?

View 23 Replies

Published Setup Requires Assembly CrystalReports 10.2.3600.0 In Global Assembly Cache?

Apr 18, 2012

When running setup to install published program, the following message occurs: System Update Required: Unable to install or run the applicaiton. The application requires that asssembly CrystalDecisions.CrystalReports.Engine Version 10.2.3600.0 be install in the Global Assembly Cache (GAC) first. This version is listed in the references of the program and in my mind, be included in build. How do I get by this error?

View 2 Replies

VS 2008 Unable To Emit Assembly: Referenced Assembly AxInterop.MSFlexGridLib Does Not Have A Strong Name

Dec 4, 2009

I have recently upgraded an VB6 project to vs2008. I was almost finished when the following error occured. Unable to emit assembly: Referenced assembly AxInterop.MSFlexGridLib does not have a strong name Prior to this error appering, I tested my app several times and it was fine. Only after publishing it did the error appear. I have tried all solutions I could find, but nothing helps. I have read [URL]

View 1 Replies

Unable To Load Assembly Ensure That The File Is A Valid .net Framwork Assembly?

Jun 17, 2009

I receive this error as "Assembly Load Error" whenever adding a form or other object that has to be inherited.

"Unable to load assembly. Ensure that the file is a valid .net Framwork assembly"

View 1 Replies

C# - Loading An Assembly Using Assembly.LoadFrom() As The Assemblies Are Located In A Different Path?

Apr 2, 2012

I am loading an Assembly using Assembly.LoadFrom() as the assemblies are located in a different path from Application Base directory.

Dim oAssembly As Assembly = _
Assembly.LoadFrom("C:\MyFolder\" + ddlXlate.SelectedItem.ToString() + ".dll")

And I consume a Type from that assembly without any problem:

oXML = CType(oAssembly.CreateInstance(sBaseType + ".XlateContainer"), _
XlateBase.XlateContainer)

However, the problem occurs when I try to use a Type from this assembly from within another method like the one below:

oComboBox.DataSource = _
[Enum].GetValues(Type.GetType(sType + "+ItemEnum," + sAssemblyName))

sAssemblyName is the one I loaded using LoadFrom() actually. After it said it cannot find the assembly, I used AssemblyResolve event which solved my problem :Subscribing AssemblyResolve event :

AddHandler AppDomain.CurrentDomain.AssemblyResolve, _
AddressOf MyResolveEventHandler

Event Handler Method:

Private Shared Function MyResolveEventHandler(ByVal sender As Object, _
ByVal args As ResolveEventArgs) As Assembly
Return Assembly.LoadFrom("C:\PSIOBJ\" + args.Name + ".dll")
End Function

And I thought maybe the error occurs because it cannot find a dependent assembly defined in assembly manifest file I loaded using LoadFrom() already but when I checked the args.Name, I saw it was trying to load same assembly and after that it worked without any problem. So basically a type in the loaded assembly cannot be found before the event adding change.

My old code was using AppDomain.CurrentDomain.Load() and Assembly.Load() methods and they were working fine without the AssemblyResolve event. I was able to reach types in dynamically loaded Assembly from every where within the same AppDomain.

LoadFrom() can find dependencies automatically within the same requested assembly path and that couldn't be problem as everything this dll needs was there. So at first it looked like a AppDomain problem to me as it looks like it seems it can reach assemblies from Load context instead of LoadFrom context and I am now using LoadFrom context.But now it seems I should pass oAssembly instance evertwhere to use any type from the loaded assembly?Doesn't it load the assembly where I can reach it everywhere (same AppDomain) using simple Type.GetType(...) method?

View 2 Replies

"Unable To Emit Assembly: Referenced Assembly?

Jun 1, 2011

I'm wanting to include a system tray icon in my WPF project, and found this resource:[URL]..which looks like it will work beautifully, but it's written for C# and I'm using VB.net for this project. I downloaded his project and built the notifyicon as a DLL, then added as a reference to my project.

It throws up an error: Unable to emit assembly: Referenced assembly 'Hardcodet.Wpf.TaskbarNotification' does not have a strong name So I'm trying to figure out the best way to proceed. Do I need to strong name it, or is there a better way to do this?

View 2 Replies

C# - Retrieve Info In DLL Assembly About Calling Assembly?

Jun 25, 2012

I have created several DLL (.NET) libraries that are used in several projects. In these DLL libraries I want to know/retrieve which assembly (EXE) calls/uses the library, so if possible I want to know info like assembly name (EXE), strong name, version number, etc.

NB: Examples may be in C# or VB. I use both languages.

View 2 Replies

Deployment :: Referencing Assembly From Another COM Enabled Assembly?

Apr 7, 2009

I have written a .net assembly which plugs into to a third party COM application. The .net assembly is COM visible to the third party application. However this .net assembly references other regular assemblies. If I put these assemblies in the GAC the COM visibile assembly sees them without a problem. However for various reasons I do not want to put them into the GAC but I cannot get my COM visible assembly to see the other assemblies when they are in other locations. I have tried putting them in the same directory as the COM visible assembly. I have tried putting them in the same directory as the third party app's exe but neither of these work.

View 5 Replies

How To Add UAC Manifest File

Sep 16, 2009

How can I add and embed manifest file in VB.net, in order to add UAC support to my application.

View 2 Replies

IDE :: Controling UAC Manifest In XP?

Feb 9, 2010

How to control UAC manifest in XP.How to add manifest file in XP and build an application step by step.

View 1 Replies

IDE :: CliickOnce - Manifest May Not Be Valid

Aug 31, 2007

I've been using ClickOnce for about year now (and regretting it), here my latest problem.I've deployed my app on about 20 PCs, and they working fine apart from one, it won't update to the latest version, it gets to about 25% and then says it can't continue, the details suggest for one of the DLL files: The manifest may not be valid or the file could not be opened. Once again, this does not happen on the other PCs.Heres what I've done so far:uninstalled completely, deleted the cache (app folders in the users profile), ran mage.exe -cc to make sure, but still no change.It also says the xxxxxx.dll is not a valid portable Executable (PE) file... but it seems to be on the other PCs ?So, before I format the hard drive and re-install windows

View 8 Replies

Looking For Bootstrapper Manifest Generator

Feb 10, 2012

can someone help me with a live link to get the Bootstrapper Manifest Generator .is there one for vb.net 2010. the link that I got on url...

View 2 Replies

UAC Manifest File Not Created?

Sep 10, 2010

I have a small project that simply copies some downloaded files from one directory to another. It is actually updating another program. The program is in the Program Files directory, therefore I need to elevate in Vista to requireAdministrator. I went to properties, clicked the UAC button, made my changes, compiled, and...no manifest file is created.

View 3 Replies

What Is The Right Build Action For An App.manifest

Sep 27, 2011

what is the right build action for an app.manifest?

View 1 Replies

.net - Compilling Assembly From The Other Just Compilled Assembly?

Apr 21, 2011

sorry for my English, I don't speek well... I need to compile assembly in memory, that can compile another one. There is a form with one button. Here is a code of the form

Imports System
Imports System.Threading
Imports System.CodeDom
Imports System.CodeDom.Compiler
Imports System.Collections

[Code]...

View 1 Replies

C# - Check If An Assembly Is A Framework Assembly?

Jan 14, 2010

Since, it's possible for anyone to name an assembly starting with 'System', checking for 'System' is not a satisfactory solution.

Alternatively, if that's not possible, how about checking the modules in an assembly?

View 3 Replies

Use Global Assembly Like A Private Assembly

Jun 20, 2010

I am building a dll-Assemby A which references another Assembly B. Assembly B is strongly named and installed in the GAC of my development computer. An other computer will not have assembly B installed in the GAC.

Question: If i handle strongly named assembly B like a private assembly and copying it into the bin-directory by specifying local copy = true in the properties-window, will the programm run on the other computer?

View 1 Replies

"System.IO.FileNotFoundException: Could Not Load File Or Assembly" When The Assembly Does In Fact Exist?

Oct 8, 2009

One of them is giving us trouble in only 1 spot out of the 4 spots we use it at:The trouble spot is a windows form project that uses reflection to dynamically load some DLLs that run long running processes. One of these long running processes is an agent that relies on one of our vender DLLsWe're getting the missing assembly exception at the point where we first enter a function that references the library. I already checked the silly things such as if we had forgotten to move a reference from the old version to the new version, but that's not the case. I also checked the bin directory of the project and the assembly is there.

View 3 Replies

.exe.config, Has A Different Computed Hash Than Specified In Manifest?

Apr 21, 2012

PLATFORM VERSION INFO
Windows : 5.1.2600.131072 (Win32NT)
Common Language Runtime : 2.0.50727.1433

[code]....

View 3 Replies

.net - Can't Get HTML5 Cache Manifest Working

Feb 8, 2012

I've build a small web app for the iPad which I was hoping to be able to run offline by using the manifest cache but I can;t get it to work.I am serving the cache-manifest file as a MVC view and setting the content type to text/cache-manifest. The manifest get's processed but doesn't add any items to the cache. Using Firebug I've tried to view the window.applicationcache but it's empty. Must be missing something obvious!The head of my HTML page looks like this

[code]...

And this is the Manifest, I've tried without relative paths and still can't get it working.

[code]...

View 1 Replies

Add DPI-Aware Entry To A Manifest In Application?

Feb 27, 2012

How does one add the DPI-Aware entry to a manifest in a Visual Basic application?

View 17 Replies

Bootstrapper Manifest Generator For Vs 2010?

Jun 29, 2010

Is there anything similar to Bootstrapper Manifest Generator for vs 2010 ?

View 1 Replies

Deployment :: Exe, Has A Different Computed Hash Than Specified In Manifest

Dec 23, 2008

Does anyone know how to rectify this problem,

ClickOnce Deployment Issue - File Has Different Computed Hash Than Specified In Manifest - Urgent! : ClickOnce and Setup & Deployment Projects : Windows Forms : MSDN Forums

ERROR DETAILS
Following errors were detected during this operation.
[12/22/2008 9:14:26 AM] System.Deployment.Application.InvalidDeploymentExc eption (HashValidation)
- File, NonFormEntryWindow.exe, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.Ve rifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.Ve rifyFileHash(String filePath, HashCollection hashCollection)

[CODE]...

COMPONENT STORE TRANSACTION DETAILS: No transaction information is available.

View 3 Replies

IDE :: Clickonce Manifest Expired For Online App?

Jan 13, 2009

The clickonce manifest expired for my application and now will not let me publish the application. I can create a new certificate with no problem but i was reading that i will have to uninstall the application from all the machines. but i publish my application as an Online application, so will i still need to uninstall the application or does that only apply for Offline applications?

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved