I have a Little .NET 4 application that starts a portable exe on a mapped drive.But when I'm on my laptop I need to establish a VPN connection before I can access the mapped drive.After establishing VPN connection, the mapped drive is still in disconnected state and my program can't access the exe.Is there som way I can make my program try to reconnect the mapped drive before it acceesses it?
View 2 RepliesThe drive is connected via USB and the problem I'm having is that, periodically, while my code is executing, the usb drive seems to disconnect and reconnect. (Nothing to do with the program, but the drive itself).I want to find a way to prevent these temporary drive reconnects from interrupting my code. IE, i want to insure that whatever read or write that is requested is actually executed even in the case of a temporary drive interruption.
View 1 RepliesI am having problems verifying that the drive is mapped. The code I have is this:For the Public Class I have this:
Dim wshNet As New IWshRuntimeLibrary.WshNetwork
wshNet.MapNetworkDrive("Z:", "\\10.21.2.218\Share", True, "wecon\sophosuser", "soweco")
To remove the drive I am using:
'wshNet.RemoveNetworkDrive ("Z:\", False, False)
What I am looking for is how to verify that the z drive is mapped, and if so then run the unmapping drive command.When I try to use a if wshNet. anything the stupid thing won't return a true or false value?I searched all through the net to find some sort of If drive mapped = true, however nothing comes up that I can implement.
I read about the UNC path, but that doesn't seem to be making much difference, it may be that I need a user name and password for the connection, can anyone demonstrate code that allows username and password entry so that a file can copy to and from a mapped network drive or the UNC is "\serverarchiveJune"
View 1 RepliesI have an application that sends files to a Network drive that has been mapped as the "Z:" drive. When code first runs, it errors with "path cannot be found". Then if you open up MyComputer, and double click on the drive, windows asks you for UserName/Password. Once entered, if you run the code again, everything is fine.
So it looks like it cant find the drive b/c a username/password has not "unlocked" the drive yet.
How do I get vb to unlock the drive so I may transfer the file?
I found some stuff online but it seems like it self maps the drive. I'm just looking at applying the username/password to the mapped drive so I may copy.
I am working on a win application that maps/unmaps network drives. And i have a couple of problems getting and setting a mapped network drive's label /name. The driveinfo volumelabel property will get or set the label of the remote drive/folder, what i need is the mapped network drive name/label on the local system. it then adds the driveletter, volumelabel, and connection state to a listview.
[Code]....
my first question on this board. I'm creating a media player(Like so many others). I try playing files over my network. When I pass this address "M:songssome artistsome song.mp3" to the windows media player control it actually opens "\ServerMEDIAsome artistsome song.mp3". But when my program checks if it is playing the correct song it thinks it is not, because the strings aren't equal. Is there a way in VB to get the network address of a mapped network drive? I can already see that it is a network drive but not wich address it points to.
View 2 RepliesI am trying to run a visual studio 2010 app from a windows 2003 server machine that writes xml files to a folder stored on a remote windows 2008 server. I mapped the server drive and can access the folder manually but in the code the 'access is denied' error is hit when the file path declaration is hit for that 2008 server folder. I checked the access writes to that folder and made sure it is shared for that user. Also the user I am logged into on the source server has admin rights so should it not be able to access the mapped drive through the application?How do I grant my app access to that or any folder on that drive on the remote server? I had this issue before but cannot remember what I did to clear this up.
View 1 RepliesHow do I determine a mapped drive's actual path?
So if I have a mapped drive on a machine called "Z" how can I using .NET determine the machine and path for the mapped folder?
The code can assume it's running on the machine with the mapped drive.
I looked at Path, Directory, FileInfo objects, but can't seem to find anything.
I also looked for existing questions, but could not find what I'm looking for.
We are getting a new server and we already have a Z: drive mapped, and we want to use the same letter and just change the path without touching all machines. I am looking for a simple VBscript to do that. I have one that will remove and one that will add, but I need to have on script.
View 1 RepliesI use the following code to layout network drives on a system. I want to add a third column for persistence but in vb.net I do not know how to check if a drive has a persistent map or not.
For Each drive_info As DriveInfo In DriveInfo.GetDrives()
If drive_info.DriveType().ToString = "Network" Then
With maps.Items.Add(drive_info.Name)
[code]......
I was expecting this to be easy but it seems that it is not... all I want to do is loop through all drives on a computer and if the drive is a network drive then get the UNC path that this network drive maps to. Simples. I was expecting to just do this:
vb.net
For Each drv In IO.DriveInfo.GetDrives()
If drv.DriveType = IO.DriveType.Network Then
MessageBox.Show(drv.RootDirectory.ToString)
End If
Next
[Code]...
I spent quite awhile trying to figure this out and not one single combination of path strings let this happen.
I usually error'd with the path is not found, part of the path could not be found, or wrong user name and password.
All I am using is the <asp:fileupload>.
I can't open an Access database on a mapped drive. However it works if I use the UNC path. how I can get this to work? See the code below for an example of what works and what doesn't...
Code:
mConnString = "provider=Microsoft.Jet.OLEDB.4.0;Data Source=\tiger-2000dvb_mt7MTrackBE.mdb" ' This works
mConnString = "provider=Microsoft.Jet.OLEDB.4.0;Data Source=T:vb_mt7MTrackBE.mdb" ' this does not work
Dim objConn As New OleDbConnection(mConnString)
[code].....
The error message I receive is...'T:vb_mt7MTrackBE.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.I've done the obvious and verified that t:vb_mt7MtrackBE.mdb is a valid path.
I had a basic text file reader/writer program that wrote and read from a mapped, shared drive up and running for a couple weeks. I wanted to add just a couple more things that shouldn't have effected the program (the ability to write another text file), and now the program can't find the shared drive. The error I get is: Could not find file '<file location>' with <file location> filled in with either the mapped name of the drive (X:) or the unmapped name (\servercomputer). Both are copied directly from windows explorer, so I know the path is right. I'm a bit of a beginner, but I'm pretty sure that all the required permissions are in place, and all users have access to this drive.
To further complicate things, it is not consistant. Some commands appear to have no trouble reading off the mapped name, but don't read the unmapped name, and vice versa. Others won't take either. Sometimes the code will execute perfectly up to the middle of the code (accessing the shared drive a couple times), and then it will give this error. If anyone could point me in the right direction,
I have run across exam ples of how to create code for getting the universal naming convention for mapped drive in VB6 and access but that don't work in VB net.
View 4 RepliesI am unable to run batch file that is located in mapped network drive using System.Diagnostics.Process in VB.Net. I get:'<batchfilename>.bat' is not recognized as an internal or external command, operable program or batch file.Press any key to continue..I get the same error when navigate to the folder (using explorer) that contains this batch file and double click it. I can successfully run the batch file by changing the directory to that folder through command prompt. I can't figure out why this is happening. I think the problem is Start() function of Process works like double click rather than just run the batch file.
[Code]...
I am doing setup project in VS 2008. I used custom action to select file from local drives.On the button click of custom action form, I am launching Open file dialog...asofdGetNetPath.ShowDialogWhen I run the setup on Vista, and click the button to open the openFileDialog, it hanged, form becomes non responsive and I have to cancel the setup.on debugging I got following error"Current thread must be set to single thread apartment (STA) mode before OLE calls can be made. Ensure that your main function has STAThreadAttribute marked in it. This exception is only raised if a debugger is attached to the process."
View 2 RepliesI am working with VB 2008. I want to be able to run this program say in N: and it will show me in an excel sheet the following:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
where clients contains subfolders and files and the size is the total of all those files within each folder and the count is the total within each folder also.
This works fine as it is but i have to select one by one the top level folders and some of them are huge so it takes forever to give me an answer.
1) I would like to see in my spreadsheet the following by only select the network drive n:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
N:Software 10.7 15430
N:Billing 0.98 105
2) I would also like to know if this is the faster method.
3) I tried adding a progress bar so that the user can have an idea of how much this will take but i had to remove because it was not working.
4) I would like to see the folder name, size of folder and count of files in the listview.
Here is the code:
Imports Microsoft
Imports Microsoft.Win32
Imports Microsoft.Win32.Registry
Imports System.Collections
[code].....
I am trying to create a function to convert a mapped drive path to a UNC path. I did some googling and found several different pages on the matter. I am most interested in the first one, but I cannot seem to get the code to cooperate. Since the original post was in C#, here is my VB.NET conversion:
[Code]...
Problem:When my computer restarts my mapped drive appears under My Computer. When I try to use it from code I get errors. If I open the mapped drive by double clicking it, and then try the code, it works. What I discovered is that when my computer starts the status, using net use, is
[code]...
I was using the following code to check the file size of a data file on my local machine. Now the data files have been moved to a mapped network drive and this code no longer works. What do I need to change or how do I access file size on a mapped drive?
Dim MyFile As New FileInfo(MyFilePath)
Dim FileSize As Long = MyFile.Length
I'm looking into adding some unit tests for some classes in my data access layer and I'm looking at an update routine that has no return value.It simply updates a row based on the id you provide at whichever column name you provide.Inside of this method, we collect the parameters and pass them to a helper routine which calls the stored procedure to update the table.Is there a recommended approach for how to do unit testing in such a scenario?
View 4 RepliesI use VS team system 2008. At the moment i need to test some business classes, i have found two kinds testing NUnit and the unit testing provided by the VS team system. what are there differences?
View 1 RepliesI'm building an Active Directory wrapper in VBNET 2.0 (can't use later .NET) in which I have the following:
IUtilisateur
IGroupe
IUniteOrganisation
These interfaces are implemented in internal classes (Friend in VBNET), so that I want to implement a façade in order to instiate each of the interfaces with their internal classes. This will allow the architecture a better flexibility, etc.Now, I want to test these classes (Utilisateur, Groupe, UniteOrganisation) in a different project within the same solution. However, these classes are internal. I would like to be able to instantiate them without going through my façade, but only for these tests, nothing more.
[Code]...
I have a really big problem in my application and I don't know how will I resolve it, so please help me. And here is my problem:
I want to create a SQL database from my application. So to do this, simply storing SQL statements in the My.Resources (as text file) and then execute it as SqlCommand.
It successfully creates the database, everything is good. But after the creating database, I want to re-connect it with my application. But it gives me that error:
Unable to open the physical file "C:Users[UserName]DesktopDB_01022010.mdf". Operating system error 5: "5(failed to retrieve text for this error. Reason: 15105)".[code]...
Is there a trappable event for the internet reconnect? I.e. a process/application running in the background will take note of the current IP address and send a SMS message when the IP address changes. I don't want it to be constantly checking the IP address, but rather only check it when the internet has disconected and reconnected with a different IP. I could use this with my remote log in from work and school to access my home machine.
If there's not an event to trap the reconnect, what about the disconnect to start a timer until the connection is re-established?
I have some software that grabs information from a mysql server. However, users minimize it to the system tray, and leave it idle for hours until using it again.If a user leaves the program idling for about 15 minutes, then goes into the program again to perform a query, it throws a Fatal Error in the mysql, and says 'connection must be valid and open'
The reason is simply because the mysql connection has timed out..I was wondering what the code would be to re-connect to the server IF it has timed out.
I share my internet connection with other users through LAN. There's some one who keeps cutting me off from time to time to increase his download speed.I know that there is some orders that can be written in the command line to reconnect to the internet after every cut but I don't know them.I started teaching myself programming under VB 2008 Express as a hobby few weeks ago. I was wondering if there is a way to write a program in VB to check the connection condition every few milliseconds and reconnect again to the real gateway till the attacker get bored.
View 25 RepliesI'm running the following WMI script to get the associations between drive letters and physical drives on the system, but for some reason it omits CDROMs/DVD-ROMs. Can someone tell me how to get those as well?
Code:
ComputerName = "."
Set wmiServices = GetObject _
("winmgmts:{impersonationLevel=Impersonate}!//" & ComputerName)
Set wmiDiskDrives = wmiServices.ExecQuery _
("SELECT DeviceID FROM Win32_DiskDrive")
[Code3]...