Unable To Run Batch File Located On Mapped Network Drive?
Nov 29, 2011
I am unable to run batch file that is located in mapped network drive using System.Diagnostics.Process in VB.Net. I get:'<batchfilename>.bat' is not recognized as an internal or external command, operable program or batch file.Press any key to continue..I get the same error when navigate to the folder (using explorer) that contains this batch file and double click it. I can successfully run the batch file by changing the directory to that folder through command prompt. I can't figure out why this is happening. I think the problem is Start() function of Process works like double click rather than just run the batch file.
[Code]...
View 1 Replies
ADVERTISEMENT
Jun 3, 2009
I am doing setup project in VS 2008. I used custom action to select file from local drives.On the button click of custom action form, I am launching Open file dialog...asofdGetNetPath.ShowDialogWhen I run the setup on Vista, and click the button to open the openFileDialog, it hanged, form becomes non responsive and I have to cancel the setup.on debugging I got following error"Current thread must be set to single thread apartment (STA) mode before OLE calls can be made. Ensure that your main function has STAThreadAttribute marked in it. This exception is only raised if a debugger is attached to the process."
View 2 Replies
Aug 11, 2011
I was using the following code to check the file size of a data file on my local machine. Now the data files have been moved to a mapped network drive and this code no longer works. What do I need to change or how do I access file size on a mapped drive?
Dim MyFile As New FileInfo(MyFilePath)
Dim FileSize As Long = MyFile.Length
View 12 Replies
Apr 4, 2009
I am working on a win application that maps/unmaps network drives. And i have a couple of problems getting and setting a mapped network drive's label /name. The driveinfo volumelabel property will get or set the label of the remote drive/folder, what i need is the mapped network drive name/label on the local system. it then adds the driveletter, volumelabel, and connection state to a listview.
[Code]....
View 1 Replies
Mar 28, 2010
my first question on this board. I'm creating a media player(Like so many others). I try playing files over my network. When I pass this address "M:songssome artistsome song.mp3" to the windows media player control it actually opens "\ServerMEDIAsome artistsome song.mp3". But when my program checks if it is playing the correct song it thinks it is not, because the strings aren't equal. Is there a way in VB to get the network address of a mapped network drive? I can already see that it is a network drive but not wich address it points to.
View 2 Replies
Sep 16, 2009
We are getting a new server and we already have a Z: drive mapped, and we want to use the same letter and just change the path without touching all machines. I am looking for a simple VBscript to do that. I have one that will remove and one that will add, but I need to have on script.
View 1 Replies
Oct 18, 2009
I use the following code to layout network drives on a system. I want to add a third column for persistence but in vb.net I do not know how to check if a drive has a persistent map or not.
For Each drive_info As DriveInfo In DriveInfo.GetDrives()
If drive_info.DriveType().ToString = "Network" Then
With maps.Items.Add(drive_info.Name)
[code]......
View 2 Replies
Dec 23, 2009
I was expecting this to be easy but it seems that it is not... all I want to do is loop through all drives on a computer and if the drive is a network drive then get the UNC path that this network drive maps to. Simples. I was expecting to just do this:
vb.net
For Each drv In IO.DriveInfo.GetDrives()
If drv.DriveType = IO.DriveType.Network Then
MessageBox.Show(drv.RootDirectory.ToString)
End If
Next
[Code]...
View 10 Replies
Sep 21, 2011
I spent quite awhile trying to figure this out and not one single combination of path strings let this happen.
I usually error'd with the path is not found, part of the path could not be found, or wrong user name and password.
All I am using is the <asp:fileupload>.
View 2 Replies
Aug 5, 2009
I had a basic text file reader/writer program that wrote and read from a mapped, shared drive up and running for a couple weeks. I wanted to add just a couple more things that shouldn't have effected the program (the ability to write another text file), and now the program can't find the shared drive. The error I get is: Could not find file '<file location>' with <file location> filled in with either the mapped name of the drive (X:) or the unmapped name (\servercomputer). Both are copied directly from windows explorer, so I know the path is right. I'm a bit of a beginner, but I'm pretty sure that all the required permissions are in place, and all users have access to this drive.
To further complicate things, it is not consistant. Some commands appear to have no trouble reading off the mapped name, but don't read the unmapped name, and vice versa. Others won't take either. Sometimes the code will execute perfectly up to the middle of the code (accessing the shared drive a couple times), and then it will give this error. If anyone could point me in the right direction,
View 1 Replies
Apr 23, 2010
How do I load or display an Excel file located on the hard drive in vb 2005?
View 2 Replies
Jun 7, 2011
am currently writing a program that uses multiple scripts we use to diagnose software we use in our environment. Currently, the only we retrieve our information is going to the local machine, and running the script locally, and retrieving the output results. The script is an batch file.The goal of the program I am currently creating is to automate the process by specifying which machines need to have the script ran on, generating the script, dispatching it, executing it, and retrieving the output results from the machine the program is ran on...
View 3 Replies
Dec 17, 2009
I am having problems verifying that the drive is mapped. The code I have is this:For the Public Class I have this:
Dim wshNet As New IWshRuntimeLibrary.WshNetwork
wshNet.MapNetworkDrive("Z:", "\\10.21.2.218\Share", True, "wecon\sophosuser", "soweco")
To remove the drive I am using:
'wshNet.RemoveNetworkDrive ("Z:\", False, False)
What I am looking for is how to verify that the z drive is mapped, and if so then run the unmapping drive command.When I try to use a if wshNet. anything the stupid thing won't return a true or false value?I searched all through the net to find some sort of If drive mapped = true, however nothing comes up that I can implement.
View 3 Replies
Jun 30, 2009
I read about the UNC path, but that doesn't seem to be making much difference, it may be that I need a user name and password for the connection, can anyone demonstrate code that allows username and password entry so that a file can copy to and from a mapped network drive or the UNC is "\serverarchiveJune"
View 1 Replies
Jun 30, 2009
I have developed a visual basic app in Visual studio 2008. I have created a windows installer file. Can I deploy this on a network drive and does .NET framework have to be installed on server? The application has a MS access database associated with it, so I would like to have it backed up via the network.
View 1 Replies
Feb 4, 2010
I have an application that sends files to a Network drive that has been mapped as the "Z:" drive. When code first runs, it errors with "path cannot be found". Then if you open up MyComputer, and double click on the drive, windows asks you for UserName/Password. Once entered, if you run the code again, everything is fine.
So it looks like it cant find the drive b/c a username/password has not "unlocked" the drive yet.
How do I get vb to unlock the drive so I may transfer the file?
I found some stuff online but it seems like it self maps the drive. I'm just looking at applying the username/password to the mapped drive so I may copy.
View 1 Replies
Oct 13, 2011
I have a Little .NET 4 application that starts a portable exe on a mapped drive.But when I'm on my laptop I need to establish a VPN connection before I can access the mapped drive.After establishing VPN connection, the mapped drive is still in disconnected state and my program can't access the exe.Is there som way I can make my program try to reconnect the mapped drive before it acceesses it?
View 2 Replies
Jan 5, 2012
I am trying to run a visual studio 2010 app from a windows 2003 server machine that writes xml files to a folder stored on a remote windows 2008 server. I mapped the server drive and can access the folder manually but in the code the 'access is denied' error is hit when the file path declaration is hit for that 2008 server folder. I checked the access writes to that folder and made sure it is shared for that user. Also the user I am logged into on the source server has admin rights so should it not be able to access the mapped drive through the application?How do I grant my app access to that or any folder on that drive on the remote server? I had this issue before but cannot remember what I did to clear this up.
View 1 Replies
Jan 14, 2010
How do I determine a mapped drive's actual path?
So if I have a mapped drive on a machine called "Z" how can I using .NET determine the machine and path for the mapped folder?
The code can assume it's running on the machine with the mapped drive.
I looked at Path, Directory, FileInfo objects, but can't seem to find anything.
I also looked for existing questions, but could not find what I'm looking for.
View 8 Replies
Dec 8, 2008
I can't open an Access database on a mapped drive. However it works if I use the UNC path. how I can get this to work? See the code below for an example of what works and what doesn't...
Code:
mConnString = "provider=Microsoft.Jet.OLEDB.4.0;Data Source=\tiger-2000dvb_mt7MTrackBE.mdb" ' This works
mConnString = "provider=Microsoft.Jet.OLEDB.4.0;Data Source=T:vb_mt7MTrackBE.mdb" ' this does not work
Dim objConn As New OleDbConnection(mConnString)
[code].....
The error message I receive is...'T:vb_mt7MTrackBE.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.I've done the obvious and verified that t:vb_mt7MtrackBE.mdb is a valid path.
View 3 Replies
Jun 21, 2011
How do I get all of the mapped network drives (shared ones) like the ones that a person would see in Windows Explorer? That is,
Network Places
Computer 1
Shared Folder
Computer 2
Shared Folder 1
Shared Folder 2
Is there a command or an API function that I can use to get at least the names of the computers and its folders?
View 1 Replies
Jun 13, 2008
I have run across exam ples of how to create code for getting the universal naming convention for mapped drive in VB6 and access but that don't work in VB net.
View 4 Replies
Dec 10, 2008
Does anyone know if there is a way to determine if a drive is local or a network drive?
View 1 Replies
Oct 27, 2011
In this question I'm using Visual Studio 2008. My code is quite simple, as it was used from a reference I grabbed off the web. I'm using ASP/VB.Net, IIS6.0 on a Windows Server 2003 box.I've looked at various sources online, and have not been able to piece together a proper result. The purpose of this is to list a slew of directories and their respective files, and allow the user to eventually manage that directory (such as open and delete files).
Here is my ASPX page:
<%@ Page Language="vb" AutoEventWireup="false" CodeBehind="DirectoryList.aspx.vb" Inherits="VCMReports.DirectoryList" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
[code]....
When launching the page, the following error appears: 'V:Users' is not a valid virtual path. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Web.HttpException: 'V:Users' is not a valid virtual path.
Things I have tried:
On the server, I have mapped out the drive and the directory.Permissions seem to be properly set, impersonate is correct.If I were to list a directory in the actual directory "C:InetpubDirectory", there is no failure.I do understand this is incomplete for the Directory listing portion, this will only list files (so this will need to be modified.I have attempted to create a Virtual Directory, and the application presented the same error. On my local development machine, I have the same path created - same error. How am I able to view the contents of a shared directory and it's files?
View 1 Replies
Feb 18, 2011
I need to MOVE a batch of files from one drive to another one by one.How can I know when one file as completed the MOVING process so I the other file in row can start moving
View 3 Replies
Jun 7, 2009
Dim fs As New FileStream("C:Womanizer2.m4a", FileMode.Create)
Dim writer As New BinaryWriter(fs)
Dim reader As New StreamReader(networkStream)
'Dim send As [Byte]() = reader.ReadBytes(fs.Length)
[code]....
These are two code blocks from the two programs I have wrote. The first is the server program that receives a connection and writes the file to disk. The second is the Client program that sends the file to the server to be written to disk.As it is - it hangs. I did once get it to write to the disk - but the file was twice the size of the original. what objects to use for transferring a file over a TCP IP network connection with TCPClient and TCPListener.
View 3 Replies
Oct 28, 2008
I am working with VB 2008. I want to be able to run this program say in N: and it will show me in an excel sheet the following:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
where clients contains subfolders and files and the size is the total of all those files within each folder and the count is the total within each folder also.
This works fine as it is but i have to select one by one the top level folders and some of them are huge so it takes forever to give me an answer.
1) I would like to see in my spreadsheet the following by only select the network drive n:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
N:Software 10.7 15430
N:Billing 0.98 105
2) I would also like to know if this is the faster method.
3) I tried adding a progress bar so that the user can have an idea of how much this will take but i had to remove because it was not working.
4) I would like to see the folder name, size of folder and count of files in the listview.
Here is the code:
Imports Microsoft
Imports Microsoft.Win32
Imports Microsoft.Win32.Registry
Imports System.Collections
[code].....
View 5 Replies
Apr 7, 2009
I am trying to create a function to convert a mapped drive path to a UNC path. I did some googling and found several different pages on the matter. I am most interested in the first one, but I cannot seem to get the code to cooperate. Since the original post was in C#, here is my VB.NET conversion:
[Code]...
View 1 Replies
Mar 31, 2009
Problem:When my computer restarts my mapped drive appears under My Computer. When I try to use it from code I get errors. If I open the mapped drive by double clicking it, and then try the code, it works. What I discovered is that when my computer starts the status, using net use, is
[code]...
View 5 Replies
Aug 24, 2009
Compile DLL to network drive
View 1 Replies
