VS 2005 - Creating New Application (Solution Explorer Window)

Mar 16, 2011

I seem to have some finger trouble creating a new application, here is what I am trying to do: I am trying to create a new solution and under the solution an exe (console project and a set up / deployment project. I have done this in the past and cannot see to do that any more.

Steps:
1. Create a new solution, the solution show in the solution explorer (with 0 projects)
2. Using "add" I create a console application (under the solution) and it shows a module etc. So far fine.
3. At this point the solution explorer windows only shows the console project and the solution itself (that used to show on the top) is gone. Now I am not able to add another project to my solution. I close my screen and then try to open the solution again. It comes up with the console project.

View 2 Replies


ADVERTISEMENT

IDE :: Whats The Tool Name Of Solution Explorer - Error List And Properties Window

May 9, 2009

I am developing an application in which I need to use the tool jus like the Solution Explorer or Error List or Properties Window. Its like there have the common functionality of Floating,Dockable,Tabbed Document,Auto Hide and Hide. Can u let me know which tool in toolbox has this feature.

View 7 Replies

VS 2005 Solution Explorer Files?

Jun 10, 2009

I just noticed that "TakeOffList.Designer.vb" is not in the "TakeOffList.vb" tree,

Whats happened there, will this cause a issue later as it all runs fine at the moment?

View 2 Replies

IDE :: Getting Back The Solution Explorer On Vb Express 2005?

Dec 28, 2009

ok so when i was watching a tutorial with my dad about learning the ropes of vb express 2005 i saw something he had that i didn't. so i paused the video and my dad tried getting the part to where i needed it and in the process deleted most of the stuff on the right hand side. so he uninstalled then reinstalled and we got most of it back except the solution exlorer. now i've gone to view and when i click on the solution exporer nothing happens.

View 2 Replies

[2008] Application Performance Explorer - Open The Solution In The Visual Studio IDE

Mar 25, 2009

Stupid question, but how do I get access to this Explorer? The says: To create a performance session for Windows client application:

(1) Open the solution in the Visual Studio IDE.

(2) On the <B>Analyze</B> menu, click <B>Launch Performance Wizard</B>.

(3) From the <B>Which of the following available targets would you like to profile?</B> drop-down list, select the name of the application that you want to profile, and then click <B>Next</B>. You can add more binaries later.

(4) Accept the default Sampling profiling method, and then click Next.

(5) Click <B>Finish</B>.


Only problem is that there is no <B>Analyze</B> menu in the IDE.

View 1 Replies

VS 2008 : Enable "Autio Hide" Command For Solution Explorer Window?

Jan 22, 2010

How to enable "Autio Hide" command for Solution Explorer Window

View 3 Replies

VS 2005 - Load The Report From Solution Explorer It Tells "Load Report Failed?

Nov 30, 2009

When I load the report from my c: drive it works fine:

[code]...

Now when I load the report from solution explorer it tells me "Load report failed. The system cannot find the file specified"

[code]...

I have added the report to solution explorere and part of my project

View 3 Replies

Creating A File Explorer Similar To Windows Explorer?

Aug 1, 2010

I want to make a program that is similar to Windows Explorer. It will have a button that when you click it it opens a FolderBrowserDialog and it will have an area that displays the contents of the selected folder. I want to have a label that displays the current folder path (i.e. 'USERDocuments...') and I also would like a feature to search all files on the computer.Also, is it possible that when I click on a file in the contents of the selected folder it displays its information (i.e. Name, Size, etc.)? And can I also make it so that if you double click on another folder in the current folder's display it opens that folder? And can I have a button to go up one directory?

View 1 Replies

Solution Explorer Not Showing Up

Sep 26, 2009

When i Restarted my project, the solution explorer is not showing up. I tried with ctrl+ ALt+ L, still it is not showing up. The property window is showing.I tried with the suggestion of going to options in Tool menu and checked whether "ALWAYS SHOW SOLUTION" is selected or not. What may have caused this problem?

View 4 Replies

Bold Letters In The Solution Explorer?

Jan 16, 2012

I'm debugging someone else's code and one of the projects within the solution explorer always has bold letters. What does this mean? It is the second project in the build order and has one depedency, but creating a dependency on another project does not produce bold letters.

View 1 Replies

Referring To A Class In The Solution Explorer?

Jul 20, 2009

I have added some classes to my project and now i want to define a variable as one of the classes, for example the class is called xml and i want to create a variable called XMLfile and have it as the class XML.

Can this be done? Or can variables only be declared as types (like Integer, string, etc)?If you're not living on the edge, you're taking up too much room

View 4 Replies

VS 2005 : Windows Explorer Right Click Menu Item For Application?

Apr 7, 2010

i want to put a menu item for my application to the right click menu of windows explorer.I do not want to do it programmatically but i want to do it with the .NET installer.Until now i have found that i have to insert into the registry the following keys:

HKEY_CLASSES_ROOT/*/shell/MyApplication/command
and i have to put there a new value of
"[TARGETDIR]MyApplication.exe" "-file=%1"

The problem is that i want to be able to select multiple files and then call my application with parameter all of these files.Now when i right click with many selected files my application is run for each file sepparately.I want to run my application only once and with an input parameter of all the files that are selected.Also until now i cannot add a value to the (Default) key. It only adds a new value to the registry...Also i want to be able to do the same thing with folders...

View 9 Replies

.net - Create A Solution Explorer Like Visual Studio?

Jul 16, 2010

I want to be able to create a tree view that can get its nodes form a directory on a computer. In the code below, I am able to get all of the files into a list, but I cannot get the folder correct. What I mean is in your user directory, you have sub directorys such as, Documents, Music, and Pictures. When you run this code, it displays them each as thier own node, not nested. I hope this makes sense.

[Code]...

Changed the code to the way spinion told me to. When I run this code I get an error 'Object reference not set to an instance of an object' when it starts to try and add files to the tree view.

View 1 Replies

.net - Opening HTML Document From Solution Explorer?

May 1, 2012

I am trying to run an HTML file that I have imported into the Solution Explorer. I don't know how to refer to documents in the Solution Explorer in code. How can I do that?

I am currently using this code, but it doesn't work: process.start(".help.html")

View 1 Replies

Access Images Contained Within Solution Explorer?

Feb 2, 2012

I'm trying to access some images I've copied into a folder within Solution Explorer. For the life of me I can't figure out how to access them programmatically.

I'm using VB 2010 Express Edition. The folder name is 'Images'. The image name is 'checked.png'.

View 1 Replies

Auto-Hide Panel Like Solution Explorer

Nov 17, 2008

I created a simple usercontrol AutoHidePanel by using toolStrip and a panel, which have to work like Solution Explorer. When the user click's the autohide pin the panel width will slowly minimized up to 3 pixels so that the user can't see that panel. when the mouse moves over to the control, It will appear as before and these functions are working fine.

But I have a prob. with below function. When the mouse leave the control, it should disappear again. so i wrote hide function in to the MouseLeave event of Both controls(Toolstrip and panel) Here the prob. begins, when the cursor moves from Panel to ToolsStrip or ToolStrip to Panel the MouseLeave event minimize the AutoHidePanel Control. I tryed this Hide Function in the MouseLeave event of my control AutoHidePanel but that dosen't even raises the event because the panel is filled in my control.

View 1 Replies

IDE :: 2008 Solution Explorer Focus Colors

Mar 27, 2009

In the Solution Explorer window, is it possible to change the highlight color of selected items *when the form does not have focus*?For example, selecting a module in the Solution Explorer highlights that module's name in Blue, then when the focus is lost by moving to another window in the IDE, that blue highlight becomes a very, very light gray (on some LCD monitors in particular). I'd like to make that light gray a bit easier to see.Is this possible? I'm running VS2008 SP1 on Vista 64.

View 2 Replies

Opening A Class, Form, Etc. From The Solution Explorer?

Dec 27, 2010

It was suggested that I pose this question here instead of the installation forum:In VB2010, when opening a class, form, etc. from the Solution Explorer, I would like it to open as a floating window, not as a tabbed document. Is there a way to do this?

View 12 Replies

Remove/hide The Bin Reference From The Solution Explorer?

Jun 23, 2010

I'm having trouble working with the Solution Explorer in VB.Net 2010. To start, I am clicking New Project > Windows Forms Application. Initially, in the Solution Explorer, there are 2 files listed: My Project and Form1.vb.

When I double-click My Project and select Resources, Add Resource, Add Existing File and select a text file that I've added to the BinDebug folder of this project, the Solution explorer is updated to include the Bin folder reference. However, if I later remove the reference, the folder remains visible in the Solution Explorer. The Show All Files button does not hide the reference again.

Is this something to be concerned about? Is there a way to remove/hide the Bin reference from the Solution Explorer since it no longer contains my resource?

View 3 Replies

VS 2008 Meaning Of Icon In Solution Explorer

Oct 6, 2010

Some of my students end up with a different icon in the Solution Explorer when they create applications. An example is the attached Exam.vb icon, which includes a little arrow into the normal Form icon (see pic) . I am guessing it means it is linked some how. When the application is zipped and submitted, an error is thrown when I unzip it to grade it which indicates that the file in not part of the project, and it references the absolute address on the original application.Any idea what caused this and how can I instruct the students to avoid it in the future?

View 5 Replies

Creating Window Application With .NET And Access2003?

Jul 16, 2009

I'm creating window application with VB.NET and Access2003.the problem is : how do i store the connection string in the app.config file that include the application.startup path? Dim connectionString As String = "Provider=Microsoft.jet.oledb.4.0;data source=" + Application.StartupPath + "db1.mdb;Jet OLEDB:Database Password=hello"

i connect it in each form but i don want this as i want to change it in one place.

[Code]...

View 4 Replies

[2008] Creating A Wpf Window Application?

Jan 19, 2009

What would be the reason of creating a wpf window application?

View 6 Replies

IDE :: Form Not Showing Valid Information In Solution Explorer

May 8, 2011

A form I created, was able to modify and shows when the program is run has suddenly changed in the solution explorer. Now when the form "MainMenu.vb" is highlighted in the solution explorer the icon for "view designer" vanishes from the toolbar. The "view code" shows "MainMenu.vb" but there is not any code there and only an empty "General" and "Declarations" show. The icon to the left of the "MainMenu.vb" is like a module icon not a form icon.

View 5 Replies

Make The .svc.cs Or .svc.vb File Visible In Solution Explorer For A WCF Project?

Mar 3, 2012

I have a solution that contains a WCF service project. In Solution Explorer only the MyService.svc file is shown, but on double clicking it the MyService.svc.vb file opens for editing. That is OK, but Visual HG (based on Mercurial) now doesn't show that the MyService.svc.vb file has changed and I cannot commit any changes without browsing to the Tortoise HG workbench. This is a possible cause for errors when merging code. So, how do I make the MyService.svc.vb file appear in Solution Explorer?

EDIT: The problem seems to be limited to VB WCF projects. In C# there is an arrow before the .svc file that will show the svc.cs file when clicked. Bug?

View 1 Replies

VS 2008 : Group The Elements In The Solution Explorer (Forms , Modules Etc)?

Oct 3, 2010

I would like to group the elements in the Solution Explorer (Forms , Modules etc) .Is this possible in the VB .NET Editor ?

View 5 Replies

VS 2008 Temporarykey.pfx - Delete The Folders In Solution Explorer Properties?

Jul 23, 2011

I know I can go to signing> and uncheck clickonce and assembly so I'll try that, but can I also just delete the folders in my solution explorer properties? I have not one but 3 folders in there --

[Code]...

View 7 Replies

VS 2008 - Cant See The Form Design While Doing Double-click The Form1.vb On The Solution Explorer I Got Error?

Jun 14, 2009

why i cant see the Form Design?and when i double-click the Form1.vb on the Solution Explorer i got error:does anyone here encounter this probz before?how to fix this.. (should i reinstall vbnet?)

View 1 Replies

VS 2010 Module With Multiple Classes Shows As A Windows Form In Solution Explorer

Mar 29, 2012

I am having this strange thing happen where I have a Module that contains multiple classes in my project. In the Solution Explorer, the module shows up as a Windows Form and if I double click on it to open it, it tries to open the Form Designer. What could be causing VS to think that it is a Windows Form instead of a module?

[Code]...

View 3 Replies

MDI Application MDI Child Forms Close() Error Creating Window Handle?

Jul 14, 2012

I'm in the process of converting a VB6.0 application to VB.Net (2008 Express). I have a MDI parent form, I'll call mdiBackground, and 4 MDI child forms, frmStatus, frmShow, frmQwerty, and frmSentence.The layout is as follows:mdibackground - has the menus at top and is a container for the child forms.frmSentence - appears at the top frmShow & frmQwerty - appear at the left and when one is closed the other one is in the same position.frmStatus - appears at the right, it has buttons which control when frmShow and frmQwerty are to appear I have a couple of regular forms that act as dialog forms. The Me.Close() works fine on these.

[Code]...

View 11 Replies

Open Another Solution In A New Window?

Nov 18, 2010

I want to open a Windows Application window that has the contents of another solutiowhen I click on the button. How do I do this?

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved