VS 2005 TreeView Images
May 9, 2009I've added 48*48 size icons to my application's treeview but they look s**t. With the default font settings what size images should I be using?
View 3 RepliesI've added 48*48 size icons to my application's treeview but they look s**t. With the default font settings what size images should I be using?
View 3 Replieshave a treeview with 13 different categories. Under each category are many sub-categories.At the minute the icons used to represent the categories are the plus/minus signs.I would like to use an Imagelist to change the icons to a closed folder icon when closed and an open folder icon when opened.
View 1 Replieshow can we add images in treeview using vb.net. Different images in different conditions .
View 1 RepliesI'm trying to accomplish something similar to:[URL]...However, I find the author's approach to be a bit cumbersome and "hackish" when I know this may be doable from within the application or at runtime.
I am populating a TreeView with a list of cameras. Depending on certain properties of the cameras, I'd like to add certain images to that camera's node.The obvious limitation is a single image per node by default.
I am trying to setup a treeview control to display all drives and folders on the PC. So far I can display all drives and folders but the images will not show except rarely. I am using an imagelist with 4 images (index 0-3). The code below is used to load the drives in the treeview control. I have tried using every type of image possible from bmp to png and nothing. I have tried the Appllication.EnableVisualStyles() which I now know isn't needed in vs 2008. I am also having problems with a picturebox in another form that shows nothing but a shadow of the image. I suspect this may be a setting somewhere maybe in vs 2008 but am not able to find one.
Treeview
Dim drive As Integer = 0, dir As Integer = 0
For drive = 0 To oDrives.Length - 1
[code]....
I'm in need of a custom control that will allow me to do something like the attached image. It's basically a TreeView with the exception of having a row of PictureBoxes for each child node. I'd be happy with a ListView that could do this even. I tried it briefly with a DataGridView with ImageColumns but the "look" wasn't quite what I was after. I'd like the "Parent Node" text to be situated above the row of images and just can't seem to find a control that will allow this.
View 6 RepliesI am trying to insert spaces between Images and check boxes on a treeview node, in a windows form app i.e. checkbox (spaces) image (spaces) node text rather than default format checkbox Image node text
View 2 RepliesI have a problems with my application..
1. collapse and expand treeview when i click plus sign (+) on treeview, treeview didn't expand subfolder but when i click image, treeview expand it.
2. showing path that i check on treeview when i check the treeview then i'm click the button, then return path that i check
This is my code..
I have a folder named "Root" in my d: drive.The "Root" folder contains two folders namely "Child1" and "Child2".The "Child1" again contains a folder named "Sub-Child1".The "Child2" again contains a folder named "Sub-Child1".I want to do a code in such a way that i can show the folder names in a Treeview.
View 8 RepliesI can't work out how to add nodes to a treeview as a child of a particular identified node.
The treeview.nodes.add function has seven overloaded definitions each of which seem to add it as a child of the root node. I can't find a way to specify the parent.
I've found this article which gives an example
TreeView1.Nodes.Add , , "root", "Root Item"
TreeView1.Nodes.Add "root", tvwChild, "child1_root", "Child1 of Root"
TreeView1.Nodes.Add "root", tvwChild, "child2_root", "Child2 of Root"
TreeView1.Nodes.Add "child1_root", tvwChild, "child1_child1", "Child1 of
Child1"
I've seen several similar articles with the same format. However this doesn't work. I get compilation errors. It doesn't match any of the function definitions, and tvwChild is not recognised as a constant.
I would like to connect my database to a treeview. Here is my code so far. It is connecting BUT i have problem. SEE the image below
[Code]...
The image below is showing my problem. The Groups are all shown. I would like to see 2A , 3A, 4A ...(so only ONE 2A) .and so on... and then click on the node to open with all the students in that group...
so here is what I got so far. I have a treeview with multiple states as parent nodes. then as child nodes I have certain cities. as for my code - I have it set up that if I check the parent node, all children nodes will be checked. I also have code that moves the tags to listbox. the only items that have tags are the children. the code that I have works if I have tags set for the states, but I dont want to have parent tags move to the listbox. how can I change the code I have or rewrite my code to get ONLY children tags in the listbox even if the parents are checked??? hope this makes sense. here is my code
CHECKS ALL CHILD BOXES IF PARENT BOX IS CHECKED
VB
Private Sub TreeView1_BeforeCheck(ByVal sender As Object, _
ByVal e As System.Windows.Forms.TreeViewCancelEventArgs) Handles TreeView1.BeforeCheck
[Code].....
Is it possible to have a script which will enable me to right click on a node in my treeview which will bring up a menu similar to when you right click on this page but with my own options on it?
View 4 RepliesI'm having a little trouble figuring how to do this.I have a dataset with a single table. Each row has the following fields ProductName, Version, CompanyName
The data might look like this
Visual Studio, 2005, Microsoft
Visual Studio, 2008, Microsoft
Office, 2007, Microsoft
I have already populated the TreeView with a list of Company names from a separate table. Now, what I want to do is to loop through my dataset adding a single node for each product under the appropriate manufacturer. Then under each product adding a separate node for each version of that product.
[Code]...
To set the checked state of the child node to its parents node i used this code.
mycode
vb
Private Sub CustomerFields_AfterCheck(ByVal sender As Object, ByVal e As System.Windows.Forms.TreeViewEventArgs) Handles CustomerFields.AfterCheck
[code]....
I also found the following code on msdn. Whats the difference b/w the two. Both of them works
vb
Private Sub CheckAllChildNodes(treeNode As TreeNode, nodeChecked As Boolean)
Dim node As TreeNode
For Each node In treeNode.Nodes
[code]....
vb
Private Sub SystemFields_ItemDrag(ByVal sender As Object, ByVal e As System.Windows.Forms.ItemDragEventArgs) Handles SystemFields.ItemDrag
[code].....
I want to create a simple treeview from a database table. It is going to be recursive and I want for each item to show the description and in the background of each item hold a key value. Then when the user selects a node I can use that key value to select the data.
View 4 RepliesHow do I check a parent node when I check one of it's child nodes??? I've googled this and searched on these forums but nothing...
View 10 RepliesI have a TreeView populated with some nodes, and some of those nodes have children. Is it possible that when the node, or child is selected that the entire node including the children be selected? I still want to deal only with the value of the root node, but for the UI I want the root + children to be selected.
View 5 RepliesI have a treeview and if I click on another control the hightlight disappears so I set the HideSelection to false and now the highlight row changes to a really light gray. Is there a way to have it still as dark blue. The reason being is because the user is clicking on a row in a grid and dropping it on the treeview and I need it to be clear that it will add it to the selected node which needs to be clear.
View 3 RepliesDoes anyone know if there is a way of populating a treeview from active directory so that it can do the following:Loads a list of servers --> Double Click the Server(Expand) --> Then i can select users --> then the department they are in --> then select the user so i can manage the user. i.e change there password[code]
View 1 RepliesI am trying to populate a TreeView control with a list of all of the OU's that have Computer members in them. I want to populate a treeview list including the OU and the Computer members underneath of those OU's. I tried searching and so far I have found nothing. Here is the code I have so far....
[Code]...
how to tell VB to take two images and blend them together. Similar to how Windows 7 does it's wallpaper fade when it switches wallpapers. For now I found the program Image Magick can do that with the composite command. I'm trying to do something like this:
SH = CreateObject("WScript.Shell")
for x=10 to 100 step 10
SH.Run("%comspec% /c composite -blend " & x & " -gravity South img1.jpg img2.jpg -matte blend.jpg")
SetWallpaper("blend.jpg")
next
But so far no dice.
I am working on the listview that I have got two columns, the one that it goes for the images and the other one goes for the text data. I can extact the text data, but not for the images.
View 3 RepliesI am successful in populating data to a treeview from 3 tables (Constituents, epresentations, Letters) from a sql database. The below code works fine for that
Dim constda As New SqlDataAdapter("SELECT * FROM Constituents", conn)
Dim repsda As New SqlDataAdapter("SELECT * FROM Representations", conn)
Dim lettsda As New SqlDataAdapter("SELECT * FROM Letters", conn)
[code].....
I want to select a node from my tree view, whatever I select is going to get a record from my database, I need a unique ID in each node so it will collect the correct document relating to the selected node.
How can I do this? the name of the node maybe used more than once? Each row in my database has an ID and Title, the title is the name I guess the ID being unique needs to be tied in somehow.
I am working on button component, and I would like to get up and down arrow keys on the button, and on the click event of these arrow keys to display the images, proposed functionality in the form can be done further. I want to display an image with the text and the arrow keys to display the images when I click on the button like this:
View 17 RepliesI playing a video with Microsoft.Directx.AudioVideoPLayback. My code is pretty simple: I create a Video object wich opens an avi movie, I assign its owner property to panel1 control and then I play the movie.I want to capture images every second from the movie that is being played.I try with panel1's DrawToBitmap() method and then saving the drawn bitmap, but it just draw the panel1, not the image.Is there a way of doing it?.
View 14 Repliesi going to create setup.exe to install my project using vb.netfor the same i want some COOL/professional setup images that i can put on my screen
View 1 RepliesI'd like to move my images / icons and wav files (basically, almost all of my internal resources) from an existing project (VB 2005) and put them in an external dll, then reference this from my exe and call the relevant resource as required.
What would be the best way of doing this?I understand that I should create a ClassLibrary and put my resources in that, but how should I expose those resources to an external program and how should I reference and call the dll from my exe?
I've done some searching, but not found anything that seems to explain the process adequately enough.