have a treeview with 13 different categories. Under each category are many sub-categories.At the minute the icons used to represent the categories are the plus/minus signs.I would like to use an Imagelist to change the icons to a closed folder icon when closed and an open folder icon when opened.
View 1 Replies
I've added 48*48 size icons to my application's treeview but they look s**t. With the default font settings what size images should I be using?
View 3 Replieshow can we add images in treeview using vb.net. Different images in different conditions .
View 1 RepliesI'm trying to accomplish something similar to:[URL]...However, I find the author's approach to be a bit cumbersome and "hackish" when I know this may be doable from within the application or at runtime.
I am populating a TreeView with a list of cameras. Depending on certain properties of the cameras, I'd like to add certain images to that camera's node.The obvious limitation is a single image per node by default.
I am trying to setup a treeview control to display all drives and folders on the PC. So far I can display all drives and folders but the images will not show except rarely. I am using an imagelist with 4 images (index 0-3). The code below is used to load the drives in the treeview control. I have tried using every type of image possible from bmp to png and nothing. I have tried the Appllication.EnableVisualStyles() which I now know isn't needed in vs 2008. I am also having problems with a picturebox in another form that shows nothing but a shadow of the image. I suspect this may be a setting somewhere maybe in vs 2008 but am not able to find one.
Treeview
Dim drive As Integer = 0, dir As Integer = 0
For drive = 0 To oDrives.Length - 1
[code]....
I'm in need of a custom control that will allow me to do something like the attached image. It's basically a TreeView with the exception of having a row of PictureBoxes for each child node. I'd be happy with a ListView that could do this even. I tried it briefly with a DataGridView with ImageColumns but the "look" wasn't quite what I was after. I'd like the "Parent Node" text to be situated above the row of images and just can't seem to find a control that will allow this.
View 6 RepliesI am trying to insert spaces between Images and check boxes on a treeview node, in a windows form app i.e. checkbox (spaces) image (spaces) node text rather than default format checkbox Image node text
View 2 RepliesI have a treeview and text box below it... is it easy or even possible to allow a user to change the height of the treeview which will automatically change the height of the textbox so there is no gap between them?ie one gets bigger the other gets smaller etc etc
View 1 RepliesI have a problems with my application..
1. collapse and expand treeview when i click plus sign (+) on treeview, treeview didn't expand subfolder but when i click image, treeview expand it.
2. showing path that i check on treeview when i check the treeview then i'm click the button, then return path that i check
This is my code..
I have a Treeview in a form. I can add a child node, delete nodes, shift a child node by creating a subfolder in the Treeview and also change text of any child node.
How can I determine programmatically, whether one of these events/changes was occur?
I have a treeview, and lets say in the treeview I have the nodes "Textbox1", "Textbox2", and "Textbox3". Also on the form I have 3 textboxes. What I want it to do is when I click "Textbox1" in the tree, to select all text and bring focus to the first textbox. So on the AfterSelect event of the treeview, I find out what node Im on, and what textbox to go to, then I say Textbox1.Focus() : Textbox1.SelectAll().When I use the keyboard and navigate to that node, it works. It jumps the focus off of the treeview and to that textbox, selecting all it's text. Works fine.But when I click on it with my mouse, it doesn't. It does select the text, bring focus to the textbox, but immediately brings focus right back to the treeview. (you have to look really close to see it) I'm thinking there's some mouse event that is bringing the focus back to the treeview, but not sure what.
View 3 RepliesIs there anyway to change the nodes in a treeview to arrows? and checkboxes for only the children of the root node?
View 15 Replies[code]...
I'm trying to change the treeview image at runtime, i'm trying to apply the above code but nothing is happening. the goal is that i have an image i want to change it to another image at runtime.
I want when i hover my mouse to nodes of treeview the cursor is hand type. Private Sub TREEVIEW2_(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TreeView1.NodeMouseHover Me.TreeView1.Cursor = Cursors.Hand End Sub I did this. But i want when i leave nodes the cursor back to default.
View 10 RepliesIn a asp.net web site I'm using a TreeView to display data from a xml file .this is the TreeView HTML code
<asp:TreeView ID="trvPILDeepSearch" runat="server" ImageSet="Simple" BackColor="#F8F8F8" BorderWidth="5px" BorderColor="#F8F8F8" LeafNodeStyle-CssClass="leafnode" Width="600px" >
<DataBindings>[code]....
Now I want to change the text color of the Parent nodes, Is it possible to change the colour only in selected nodes
Name1 <-- Change the color of this
Detail1
Detail2
Name2 <-- Change the color of this
Detail2
Detail2
I have a treeview with several nodes I would like to know how I can display different screens when the user selects the nodes: just like switching through tabs.Regards Rimzy
View 17 RepliesI work with VisualStudio 2008 and write my codes in VBasci.Also,I use Microsoft SQL server 2008 for my database and here is the question;I ve curently been doing a simple hotel software, the step that I ve got stucked in is that, I take the reservations by clicking on buttons those represents rooms in the hotel,buttons have green colour on them because they are available until I take a reservation for that room,and they must be staying green until a customer checks-in..On a check-in day,that room must go to colour of red or somethıng and must'nt be able to take another rezervation into it until the customer checks-out, I ve got 2 people comıng for that room for tomorrow who will stay for 1 night,so today it should stay green whıch means it s available,but by the mid night it must go red and must be not available to take rezervations for tomorrow,once they check-out on the day after tomorrow ıt should go green,so,available again.
View 6 Replieslocation after I clicked the images to move them to the left side but it didn't change the image.
Here its the code:
Private Sub PictureBox1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles PictureBox1.Click
If Panel3.Visible = True Then
[Code]....
make the images changes to arrow-black2 when the images moves to location "1, 145"??
I have a repeater control with item template like this:
<ItemTemplate>
<table width="70%">
<tr id="rowSIC" runat="server">
<td width="10%">
[code]....
I have a treeview on this page of which each node has and Id and value. on selected node change event, I want to change the text of repeater selected node. I am writing code like this:
Protected Sub TreeView1_SelectedNodeChanged(sender As Object, e As System.EventArgs) Handles TreeView1.SelectedNodeChanged
Dim EmployeeRepeater As Repeater = CType(Me.Form.Controls(1).FindControl("Repeater1"), Repeater)
Dim EmployeeRepeaterItem As RepeaterItem
[code]....
But It is not chagging MyLabel text. How to fix it ? Both treeview and repeater are populated in !Page.Ispostback event?
How do I reduce flicker in a vb2005 panel?Inside the parent panel I have 2 other panels that I'm am using.
The outer most panel contains a background sprite and the two innermost panels are overlays that change to fit the places in the background sprite.When I change the overlay sprites I would like to reduce the flicker and make it a smooth transition from one sprite to the next.
Here is the code that changes the images in the overlay panels the overlay panel is not changed if the new value is the same as the old value
[Code]...
When I set the button background image in properties, it looks great. When the button is clicked, the image needs to change. I tried to use an image list like this: btnSample.BackgroundImage = ImlStimuli.Images.Item(0)and I tried loading them from a file. I can get them to read, but the image always turns out blurry or distorted. I've tried all variations of alignment, BackgroundImageLayout like stretch/zoom/centered, and I changed flat style, but nothing has worked. Is there a setting or something that I'm missing in properties?
View 4 RepliesI have a report and is working with .netnow i needload images in runtime by passing the values in .net or load the image by dbthe control that i using isthe crystal report viewer, i have found codes in the web that refer this:
"crxReport.Sections(3)""CrReport.Sections("Details").ReportObjects("Picture1")=? "
but with the control what i using i dont have that option :(what is the control that i need load to the project that have that options?or is some especial version of crystal report?
I want to program a water supply pipeline network in a treeview control. It has five node (junctions). The parent-child relation is based on a parameter (say pressure). Initially, the node 1 is parent and its child nodes are 2 and 3. The node 3 has child nodes 4 and 5. At run time the pressure changes. Now, node 3 is parent and its child nodes are 1, 4 and 5. The node 1 has child node 2.
View 7 RepliesI am building a windows application with different languages, when I change the language of a form visual basic will create a new form for me which i can change the settings for my new language and all was working fine, but recently i recognized that the images i am changing in the other language form is changing the images in the default language form, so i need to create two Resources Folders for images and manaully tells the application which folder to use.
View 3 RepliesI'm using VB.net '08 express and I have a form in a program with a picturebox. I have a series of images in My.Resources. What I am trying to do is get the images in the box to change in sequence whenever the button is clicked.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sequence As Integer
Select Case sequence
Case 1
[code]....
When the button is clicked, the 1st image appears and the button then does nothing.
I am having trouble to make a form that displays the picture of the student which all his info is in a datagrid. I used the following
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
' TODO: This line of code loads data into the 'BdSyngentaDataSet.Training' table. You can move, or remove it, as needed
[Code].....
It worked. But, when i click on the next student and go back to the previous, the picture is not there. When I stop the debugging and start again the picture is there but it stops displaying again after going back and forward.
I'm having a treeview loaded with all the files and subfolders of a path. Each node is getting the filepath as tag. Once I have dragged a node (file/folder) I need to move the file(s)/(sub)folder to the new directory. Each file(s)/(sub)folder needs to get a new tag
View 39 RepliesDon't know how to copy images to resources file on VB and create background change button. I am trying to add my graphics folder to the resources folder in my project but I get some kind of error. That's the easy question. Now, I have a panel container in which I want to show an image that will be change about 5 times when I click on my background change button. What codes do I need to use for this?
View 4 Repliesi have a treeviev and listbox.i want to display the selected contents of treeview into the listbox.my code is working for file but not for folder. means i want, if the all contents of folder ABC(i.e all files) are selected then in listbox i want to show the only path of folder not the seperate path of each file.
View 1 RepliesThe idea is to scan a folder of images and then let the user navigate back and forth through the images using a couple of buttons.The problem is, I can only get it to return a single image, and not the whole lot. It's looks to me as though the images are getting assigned to the same index in the array. [code]
View 2 Replies
