VS 2008 A Form Don't Close?
Jun 12, 2011well, I have a Main form that lauches sometimes a secondary form with the
frmAlert.Show()
code... (FrmAlert.TopMost = True)
some seconds after, from the Main form I launch the
[code].....
ADVERTISEMENT
VS 2008 : Modal Form Hide Instead Of Close - Main Form Does Not Close
Mar 20, 2009I have a main form that has a button with which a smaller form is shown. Think of the smaller form as the Find/Replace dialog in many applications, such as Notepad. It's important that the form is (what I believe is called) modal. What I mean is that it always stays on top of the main form. I ensure that by calling the Show method with "Me" as the owner argument. Whenever the small form loses focus it will not disappear into the background but stay visible (albeit out of focus). If you don't understand open up Notepad and have a look at the behavior of the Find/Replace dialog.
Here's my problem: instead of actually closing the form when the X is pressed, I want it to simply Hide itself, so its position and the state of any controls (checkboxes etc) is preserved automatically.To achieve this I simply cancel the FormClosing event and Hide it:
vb.net
Private Sub Form2_FormClosing(ByVal sender As System.Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles MyBase.FormClosing
[code]....
To show the form, I use the following (note the (Me) to make the main form the owner of the form; this ensures that it remains visible even when it is out of focus):
vb.net
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Form2.Show(Me)
End Sub
Now. When I run my project, and open the Form2 (small form), then hide it again (by 'closing' it), I can no longer close the main form (Form1)! It seems the main form cannot close when the small form still exists (albeit invisible)...?? When I don't use the Me argument in the Show method, I don't get the behavior I want. I know I can set the TopMost property to True but that will also cause it to become visible on top of all the other forms, even windows not part of my application.
[2008] Notify Icon When The User Clicks The Close Button That It Doesn't Close The Form?
Jan 17, 2009I have set up a notify icon for my form. I want to make it so that when the user clicks the close button that it doesn't close the form it just takes it to shows the notify icon. They can exit the program from the notify icon. Can someone tell me how to keep it running?
View 2 RepliesVS 2008 When Close The Main Form All The Forms Close?
Aug 30, 2009my web browser is my main form and it has a number of sub forms , how can i set it that when i close the main form my sub forms dont close ?
At the moment when i close the main form all the forms close
How To Close One Form In A Project And Note The Entire Project When Using Me.close() In Visual Studio 2008
Mar 22, 2010I am really new to Visual Studio and VB and I am having trouble closing a single form:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.Close()
End Sub
When I use Me.close() associated with this button it closes the entire project and not just the single form can anyone.
VS 2008 Close Current Form And Show Different Form?
Sep 4, 2009When I use
Me.Close()
Form1.Show()
It closes the whole app.
How would I change it so that it only closes the current form while opening a new one? EDIT: I put [Not Resolved] Because I accidently pressed the resolved thing
VS 2008 A Form Doesn't Close?
Jun 3, 2010I have a Main form that lauches sometimes a secondary form with the
frmAlert.Show()
code... (FrmAlert.TopMost = True)
some seconds after, from the Main form I launch the
frmAlert.Close()
but the form don't closes itself!
[Code]...
to activate the form, but it don't closes itself, both with .Close or .Dispose or .Hide code even if it is activated by frmAlert.Select()... the FrmAlert.Visible property remains = False
VS 2008 Form Close Vs Dispose
May 6, 2009I am using VB.NET (Visual Studio 2008) and thus .Net framework 3.5. I have developed an application which has a MDI form and then has several other forms, most of which are shown using form.showdialog and some set of forms are shown using form.show. Whenenver a form (shown using form.showdialog) was closed (usually by clicking on a button (OK or Cancel)) I wrote code Me.dispose. After careful testing and R&D I figured this caused flickering on the screen. There use to be a flicker on the screen and it looked weird.
[Code]....
VS 2008 Open One Form And Then Close Another?
Dec 21, 2010i've tried
On Form1
form2.show
me.close
[code].....
VS 2008 Close Multiple Instances Of Form?
Aug 30, 2011I have 30 instances of the same form running. Video array with different video on each. Each form is named "oneForm". I'm looking for a way to close all forms with one click. I have found that I can hide the forms no problem like this.
for each killfrm as form in my.application.openforms
if killfrm.name = "oneForm" then
killfrm.hide()
[code].....
.NET End Vs Form.Close() Vs Application.Exit Cleaner Way To Close One's App?
Feb 12, 2011sometimes, when I use Form.close() when debugging my program, although the form is closed, the application is still running. I noticed this behaviour when using the msgbox function.
View 3 RepliesVb2010 Close Of The First Form Close The Application Even If A Second Form?
Feb 14, 2011I try to transfer a vb6 application to vb2010. In the vb6 I start with a login panel that the user enter uid and password autenticate with the DBServer if ok show application main menu and close the login form. the order of the me.close() after the mainform.show() does not change, The application ends.
View 5 RepliesClose The Current Form Without Clicking Any Button In VB 2008
Jun 25, 2011I have multiple forms, I need to close the current form -without clicking any button- and directly open another form in this project.. i am using show and close methods but either the 2 forms are appearing together or the current form is not appearing at all.
View 1 RepliesForms :: When Me.close() Doesn't Close Form
Mar 2, 2009I have a situation where me.close() doesn't close the form. I have a form with a button with the code seen below. What happens when the button is clicked is the new form shows, but the original form(calling form) is still there. When I go into debug mode, I can see the me.close() execute, but nothing happens (calling form stays open). When I close the second form both forms close. If I comment out the call for the second form to open the first form closes without problem.
Private Sub cmdNext_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdNext.Click
Dim f As New frmOrder3
[Code].....
VS 2008 - Form Close Events To Call Exit With User Confirmation
Sep 3, 2009I am trying to close my application and I have coded on the form closing, form closed events to call an exit form which asks the user for confirmation to exit or not. All works fine. When I press the X button on the winform things act different. On the main form where I press the X btn I store some user ID data that I use throughout the app. If I press cancel on the exit form that data is lost from the main form and cannot be used afterwards. So if the user pressed by mistake the X btn and then presses cancel on the exit form the application loses some stored data and many functions stop working.
View 4 RepliesVS 2008 Handle Saving User Control Settings On Form Close?
Dec 27, 2009What is the correct way to handle saving user control settings on form close. I have a tabcontrol that a user can add tabpages during runtime. The user control has a few controls (listbox,combobox,textbox) How can I save the created tabpages and the data in each control in the usercontrol? Below is how I am calling my usercontrol
Code
Public Class TabPageEx
Inherits System.Windows.Forms.TabPage
[code]....
I seem to be a little lost as most documentation seems to suggest that I can not save usercontrol settings in the app.config. I have played around with the solution expl. settings tab without much success. But, then again I may be going about it all wrong. So, I am looking for a little direction on the best way to handle this on form close.
Close Windows Calculator In .net 2008 When Application Close?
Aug 30, 2009how to use windows calculator in vb.net 2008?
use System.Diagnostic.Process.Start(calc)
its working but i want when application close it also close this calculator how?
Get A Button On Form A To Open Form B And Then Close (not Hide) Form A When Clicked?
Jun 12, 2009get a button on form A to open form B and then close (not hide) form A when clicked?Background: I am coding a VSTO application for Excel in VB2008.
Private Sub FormAButton_Click(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles FormAButton.Click
Dim FormB As New FormB
[code]....
RTF Close - Add A Close Button To Menu Strip That Will Just Close The Currently Opened File
Jan 16, 2009I'm currently in the process of building a text editor type program, and have run into a brick wall. I haven't done VB in years, so I may just need a little reminder on some things. I have coded everything so far as far as opening files, saving them, changing fonts, colors, etc. However, I'm looking to add a Close button to my menu strip that will just close the currently opened file, and not the entire program, while also ask the user if he/she would like to save before closing the file, and then if they select yes, it will show the save dialog, and if not, it will go ahead and close the currently opened item.
View 2 RepliesVS 2010 Sub/Child Form Close When Click On Main/Parent Form?
Jun 5, 2012i am having some trouble in my Windows form application. i have 2 forms1st Main / Parent Form2nd Sub / Child Form (Menu)
View 7 RepliesCreate New Instance Of A Form That Does Not Close Then The Parent Form Closes?
Oct 28, 2009I have been making a webbrowser for a while now, everything works well, except i am unable to make the 'open in a new window' button work right. So far i have managed to get a new instance of my form to open with the right url, but i am unable to keep that new form open when the orginal parent form closes.
Code:
Private Sub WebBrowser1_NewWindow(ByVal sender As Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles WebBrowser1.NewWindow
e.Cancel = True
Dim Href As String
[code]....
Close Child Form When Click On Parent Form?
Jun 5, 2012I am having some trouble in my Windows form application. I have 2 forms:
1st Main / Parent Form
2nd Sub / Child Form (Menu)
Problem:
I want to close my 2nd form (which opens on top of 1st form) when I click on the 1st form.
Display The Main Form And Close The Login Form?
Sep 2, 2011VS2010 VB.NET windows form app I have a login form that is my startup form.when uer hits OK I display the main form and close the login form, like this:
PrivateSub OKButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OKButton.Click
frmMain.Show()Me.Close()EndSub Problem is the application closes with me.close. Why? How can I close only the login form and leave the main form urnning???
Me.Close() Doesn't Work - The Form Doesn't Close?
Apr 16, 2009The form is an About Us form so has nothing on it only a text box and a OK button.
[Code]...
Why won't the button close the form? I'm puzzled, I tried another button just in case with the same result. UPDATE: I set a break point on Me.Close() and it isn't reaching it when I click the button, I created a new button and the same thing happened.
Close Form When A User Chooses Another Form
Aug 24, 2011I would like to know if there is a way to close a form when the user chooses to open some other form.
View 1 RepliesClose The Startup Form And Open A New Form?
Jan 3, 2010What I want is -
Dim filename = System.IO.Path.GetFileNameWithoutExtension(Application.ExecutablePath.ToString)
Dim openForm As Object
[Code]....
Form Close In Form Load Event?
Nov 19, 2009I have two forms , first one is search and second is showing the data searched by first form search criteria. When the search query runs it takes lot of sql server resources, so I have passed that query to second form, it searches in database and shows the results. But if the results are not found I wish to close the second form in Form load event. As Second forms form load event searches for the record. I tried to use SecondForm.close in SecondForm.load event but failed to do so.
View 4 RepliesForm Validation Error, Does Not Allow To Close The Form
Jun 8, 2012I am using the following code
Private Sub txtAIT_Validating(ByVal sender As Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles txtAIT.Validating
If txtAIT.Text <> "" Then
[Code]....
In form I have a close/Cancel button, and I set Causes Validation = false, and on its Click I used "Me.Close", but form can not be closed.
Button Works fine, but form can not be closed until text field has been validated.
Forms :: First Form Close And Second Form Open?
Feb 21, 2009how can i do that? first form close and second open........i did that but first is only hiding not close
View 2 RepliesOpen To Another Form And The Current Form Will Close?
Nov 14, 2010in my visual basic 2008, i have create like a hospital check form like just pressing some keyword the person data automatically open to another form and the current form will close since i am new to the visual basic 2008 i would like to ask what is the coding work to save the data of a person and how to retrieve a data of that person by pressing the keyword?
View 3 Replies