I am working on arrays but i need to do a sql update statement. Contents of the array are also part a primary key in my table.How do I do an update using the array for example if my array is room names and my other table values are start date, end date and campus ID.
View 5 RepliesI need to update more than one DataAdapters, so I used the
Dim sqlcmdbldUser As New OleDbCommandBuilder(dtaadpUser)
Dim sqlcmdbldPoints As New OleDbCommandBuilder(dtaadpPoints)
But only one of them works, the second one brings up errors if I try to update the DataAdapter. Is there a way of using and updating multiple data adapters?
I have found a major bug with this game Ive been working on for some time. The best way to make this game would of likely been by using an array. Problem is I dont know how to use arrays that well and I don't understand them. So I used a lot of picture boxes and If statements.
So here is the problem. When you click on the box its suppose to check to see if its a bomb or block. If its a block it busts the block, if its a bomb it will explode. Now here is the problem. Each block is not holding its own value or "block type" which determines if its a bomb or block. So when you click on a block and lets say it says its a bomb, the next block you click rather if its a bomb or not will explode. So its not checking the block value you click. instead its just grabing the last value generated. I will only show you short blocks of code because the code was written in a pattern form and it just repeats its self. If you post a reponse, remember im still newb and try to post samples/solutions using code ive given.
'Random Block Generator
Public Sub RandomBlockType()
Randomblock = New Random
SelectBlock = Randomblock.Next(1, 5)
[CODE]...
a problem for update and delete statement without an error. When i Update or Delete Data Does not occur.This is my code for Update:
With cmd.Parameters
.Add(New SqlParameter("@Id", lblid.Text))
.Add(New SqlParameter("@LastName", txtlastname.Text))
[code].....
It it possible in vb.net to run a MySql command like you would do in MySQL
or SQL? like insert and update statements and also to create a table in the db?
If yes, how could I do this?
I wrote simple update/insert statements that are returning a syntax error, what am I missing? The table name is notes, the field note is type memo, acaps is a double. update notes set note='why is there a syntax error' where acaps=12345
[Code]...
I am trying to do simple insert, update, delete, select statements within VB .NET to access a MS Access database. I have tried all kinds of solutions offered on the web and while the code seems to work, no rows are inserted. Also, I have tried, unsuccessfully, to use the Try/Catch to see if there's an error with no success. I have attached the versions of VB .Net and MS Access I am using: Here's the code:
[Code]...
the statement Dim state(49) As String and maintain a list of certain states. The list of states should always be in alphabetical order and occupy consecutive elements of the array. The buttons in the program should give the user the following options: (a) Take the state specified by the user in a text box and insert it into its proper position in the array. If the state is already in the array, so report. (b) Take the state specified by the user in a text box and delete it from the array. If the state is not in the array, so report. (c) Display the states in the array. "
Private Sub states_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
state(0) = "Alabama"
[code]....
Can someone give me a site to a tutorial that will help me write a program that will generate a pattern using do while, if else statements,and do until statements. I have been using google but I can't find anything. I need to generate patterns a certain size 6 by 6 or similar such as something like a checkerboard but where the ^ symbols is there a suppose to be a blank space..
View 3 RepliesWell I hope this is the right section since I can't figure out where to post for vb 2008 express. Anyway I'm trying to get my program to search for a html element and if it finds it, do something. I just started programming vb yesturday and have little programming knowledge. I'm learning as I go and thats how I learn.
Private Sub Connect_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Connect.Click
WebBrowser1.Navigate(AdressBox.Text)
Dim Element As HtmlElementCollection = WebBrowser1.Document.GetElementsByTagName(tagName:="login")
' If (Element) Then
' End If
End Sub
I keep getting a null reference error no matter what combinations I try. I want it to search for the login name and if there is one then do the login procedure I have setup. I want to do this for a image later but I need to learn this first. I know that this tag name = login and is NOT a id.
I need to write a do until statement. 2 of them actually. 1st one records all of the income and then one that records all of the expense. Then they need to be add to figure a profit or a loss.
View 12 RepliesExplain what these do and how you would use them?
View 11 RepliesI have an export file containing the sql code to create and populate a table of a database. There is a way (using the visual studio 2008 using the data connection on the server explorer) to pass to the created table comething like this: [code]I have seen that this is possible only if i submit just one value like this:INSERT INTO province (id,codice_regione,codice,nome,sigla) VALUES(1, 1, 1, 'Torino', 'TO');But i would like to create all the record of the table running the sql script just one... i have a table of over 50000 record..
View 2 RepliesI'm very new to programming and have the following question:When using the set statement in properties we have to declare a variable outside the property which holds the data for the get statement. How can i make this variable not visible to other classes. In the example below i don't want other classes to be able to see "m_area, a and b" when an instance of Ellipse is created.
[Code]...
Incredibly newbish question, I know. Up to now, I've only made simple applications that do not require adding import statements
View 9 RepliesI want to write two nested loops and inside them "two if statements" when I write an Else statement which has a messagebox saying that ID is not found.. it repeated many times depending on the for loops. I only want to be displayed once !!! but when I wrote my code like this (using exit sub), the message appears when the condition is right and appears when the condition is wrong. I tried to move this statement somewhere else but still I have problems with it.
With EMPDataSet
For I = 0 To .Personal.Rows.Count - 1
For j = 0 To .Work.Rows.Count - 1
If EMP_CPR = .Personal.Rows(I).Item("CPR") Then
txtName.Text = .Personal.Rows(I).Item("Full_Name")
[Code] .....
I have a question about using nested IF statements in a SQL query. I have a select statement that calculates a semester grade -- Dim sqlStr As String = "SELECT 'XXX-XX-' + right(socSecNumber,4) As [Student SSN], Round((firstExam + secondExam +(2*finalExam))/4, 0) AS [Semester Average] FROM Grades that I am displaying the results in a datagridview. I can successfully display the masked social security number and the Semester Average but I also need to convert the Semester Average to a letter grade to display in a newly created column for Grade. Can this somehow be done with nested If or Case statements within the SQL statement or is there a way to pass the Semester Average information as a variable to a nested vb If statement? Basically, I am needing to know how to display the letter grade to the datagridview using this criteria:
[code]...
what exactly the difference between using cases and if statements are.
View 4 RepliesI have to deploy my VB.NET application developed in VB.NET and Visual Studio 2005. The customer is using SQL Server 2008, while the application is being built against SQL Server 2000.I received the following error against SQL Server 2008:An explicit value for identity column in 'Outgoing_Invoice' table can only be specified when column list is used and Identity Insert is ON.Here is my query for inserting data in two tables:
Dim cmd1 As New SqlCommand("Insert into Stock values(@invoice_no, @gate_pass, @exp_no, @clm_no, @category, @item_name, @weight, @units_case, 0, 0, @crtns_removed, @pieces_removed, 0, 0, @date_added, @date_removed, @inc_total_price, @out_total_price,[code]....
The error message is shows at cmd1.executenonquery. Both these tables Stock and Outgoing_Invoice have an identity column labelled serial before @invoice.The problem only arose when insert was tried on SQL Server 2008. When run against SQL Server 2000, it works as expected.What can be the possible reason for this issue and how can it be resolved?
I am just starting to learn the visual basic language so i am trying to make a simple application where a user can put in it's first and last name or else the application exists.
I manage to do this fine untill i get to the point of ending one if statement and starting another in the same button..
(in the form i have button1, button2, label1, label2. Button2 is only a "quit" button)
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]....
What happens when i run this is that i can put in the first name but then when i click yes the application closes.
There is not a VB.net database forum, and there is a HUGE difference (unfortunately) between ADO and ADO.net. I have a connection to a MS SQL database, which I understand is capable of handling multiple SQL statements in one Execution, ie
Using cmdExe As New System.Data.SqlClient.SqlCommand
sSQL = "Delete * from mytable where UniqueID=123;Insert into mytable (UniqueID, Field) values (123, 'something')"
.CommandText = strSingleSQLLine
[Code]....
There are two questions here actually...can I add the parameters before setting the command text, and do I have to add the same parameter over and over again?
how to associate a select case statement with, which point to four Function procedures, to four radio buttons that are used to +, -, *, and / two simple fractions in a fractions calculator. This is a class assignment for which I have already been graded. I used an If...ElseIf statment and it worked perfectly. Now I am trying to utilize the Case Statments with Function Procedures to do the same thing. I do not get graded for this, but I was told to research it an find an answer. My current code is listed below.
[Code]...
I've recently ported my website from 2005 to 2008, and I'm using LINQ Queries to implement a search. The issue is that none of the fields are mandatory, so I've had to implement a dynamic LINQ Query (sic?). Here's the relevant code -
Public Function searchQuery(ByVal titleType As String, ByVal titleName As String, _
ByVal configMgr As String, ByVal lifecycle As String, _
ByVal CIType As String, ByVal recordsPerPage As String) As IEnumerable(Of
[code].....
I am working on Datagridview. My task is adding buttons in the Datagridview table based on the case statements. Like In the Present table i have one column called "CategoryDescription". In this column, values are like 3101,3102, 3103........Here 31 is the common. and like 3201,3202,3203......Here 32 is the common. Like there are so many common values are there. So where ever the common values will come there i have to add one button in the Same column.
So Finally my conclsion is at Satrting 3101 and starting 3201,3301,3401.. i have to add one button control 3101 and add button control on 3201 and add button control on 3301.
I am trying to figure out how to do this:
if (phrase = hello) then
"say hello"
if (phrase = how are you?) then
[CODE]...
So basically, I want it to work like a timeline. If I say hello, then it will respond and move onto the next if statement. Get it?
Here is the code I have now:
If phrase.Result.Text = "hello" Then
synth.Speak("Hello to you too")
If phrase.Result.Text.Contains("How are you") Then
[CODE]...
In VB6 I load a recordset containg all of the records (6 fields per record)in a table into an XArray and then manipulate the records in the array and then write them back to the original table. The array issorted by the first field (1 to maybe 8000 or more) I need to find records in the array by an ID field and then move them (because of some external criteria that happens many times) from say number 400 to number 375. Then all of the other records between 375 and 399 were renumbered up 1 to fill the gaps left by the move.
The XArray worked well as it could find and also move to a next record easily to facilitate the revisions to each record quickly. Everything is done in VB6 in code and nothing visual needs to be shown to the user until say 2000 of these external changes are complete. What is the best, most efficient way to do this in the .Net framework in VB2010. Datasets, Dataviews. tableadapters, arrays. enums ?
I'm using a series of nested if/then/else statements to make sure a user enters information into each text box or chooses a radio button. What would i use to say if no text is entered in textbox1, then ... also what would i use to make a sure the user choose one or the other radio button? for example i also have a combo box, i used "If SubjectComboBox.SelectedIndex <> -1" for the if statement.
View 2 RepliesMy assignment is to have a user enter in big integers using what i think is two parallel arrays. I got this far but now im stuck. I think i need to actually convert the text box input into an array but i do not know how to do that. I am all over the place in this project.
'Created/ Revised by: Jessica Falcetta
'Cap 204 Final Project: Big Integer Project
'Project Purpose: To calculate large integers through parallel arrays
[CODE]...
I have a VB.net console app and I am opening a function in a dll written in fortran. I am passing 3 arrays through the function by reference. When they come back out the otherside they ahve all tunred to arrays of only one element And that element is 0.I read on the internet somewhere that when doing this kind of thing it is a good idea to only pass the first element of the array into the function.I tried changing my function declaration to accepting single elements rather than single dimensional arrays, and now the arrays are the same length before and after the function call, but they don't seem to be changing at all, so i'm not sure that this is working
View 1 RepliesI would be more that happy for someone to tell me I am missing something very simple here I am writing code that - amongst other things - talks to code on other servers using the tcpclient function in .net
What I want to do is - in essense very simply. I want to define a structure which includes an array load it with data and sent it to the other end of the socket.
[Code]...