VS 2008 IDE: F8 = Step Into On One Computer, And F11 On Another

Mar 24, 2010

I have VS 2008 on two computers. I seem to recall F8 as being the keystroke for Step Into on both computes, but somewhere along the way this changed for computer #2, and it is now F11. I've looked through the settings and I can't find where this may have been changed.

Another change that has taken place on computer #2 is that exceptions are no longer caught and displayed. If an exception occurs, the code keeps running or just returns to the project--no information is presented at all. Meanwhile on computer #1, everything is as it was before, an exception is caught and an information window is presented showing some brief information along with one or more links meant to help with resolving the matter. What has happened to the environment of computer #2? I don't remember changing anything, but clearly something did change.

View 11 Replies


ADVERTISEMENT

IDE :: Microsoft VB 2008 Step By Step Chapter 4 Component Tray

Oct 4, 2011

I am running Microsoft Visual Studio 2008 Professional on a Windows 7 system. While working on the visual basic exercise in chapter 4 of the Microsoft Visual Basic 2008 Step by Step book on the MyMenu program I added a Toolstrip to my form and then I was trying to perform the add OpenFileDialog and ColorDialog controls to the component tray as described at the bottom of page 111 under Using Dialog Box Controls. I could never get the controls to appear in the component tray as instructed in the book.

[Code]...

View 2 Replies

VS 2008 Threading Step By Step?

Sep 22, 2009

i would like to ask for little help in here. I developing application for wake on lan and i have group of checkboxes button and i sub with threads. My problem is in button event i would like to run sub only if checkboxes are checked. All works but problem is when i have this rutines in button action then it start threading all the same time. Its very hard to explain. Bassicaly i wanna read this if checkboxes systematicly 1 by 1 from top to down coz right now in my multitexbox(status) they are all mixed and i can't recognize what belong to what.

[Code]...

View 7 Replies

AxMediaPlayer Step Function Doesn't Step Backwards

Nov 10, 2011

I have a program that plays a video and uses the step function to move frame by frame backwards and forwards through the video. The forward frame works just fine:

AxWindowsMediaPlayer1.Ctlcontrols.step(1)

However, the backwards step (below) jumps a full second backwards while the forwards step only steps .033 seconds forward (presumably a single frame).

AxWindowsMediaPlayer1.Ctlcontrols.step(-1)

I can't find any documentation about this problem online and in fact I can't find much mention of this function.the documentation does say the -1 command should step back one frame. IWMPControls2::step method Is this a known bug or is there an updated function I should be using?

View 5 Replies

Step By Step On Learning Programming Language, DOTNET?

Oct 22, 2010

I really need to learn much about it, but always stock up,.DOTNET covers the vb.net, C#, C++, ASP.NET, .NET framework is it right?.C++? ASP.NET?What should be my step by step procedure?

Will I start on database? Connection of client and server? Webrowser? Application?...etc etc etc.Will it ok if i start on studying every toolbox item one by one?

I dont have any project or every assignment that needs to be done....All i want is to learn about DOTNET

View 7 Replies

Step By Step Procedure Of Learning Programming Language?

Nov 2, 2010

coming to the topic i want to learn dotnet i am not good at programming. but i want learn it i m very passionate about it.you all know soo much about DOTNET even i want to become like you people.i have a bit knowledge about this but not much..What should be my first step towards this?How should i start with and from where should i start with?

View 3 Replies

Step-by-step Instructions For Using Webbrowser In Windows App Using Program?

Jul 16, 2009

My need is to work with what I have (2005 studio), what I know (Visual Basic) but need a primer. I am a visual learner (so I need to see [1] how the form is created, named and set up). From there I need to see [2] how he code works so that I can implement from there.

View 2 Replies

SubSonic 3 Step By Step WinForm App .Net Generating And Setup?

Aug 27, 2009

write SubSonic 3 Step By Step WinForm App VB.Net: Installation,Setup And Generating.

View 2 Replies

Asp.net - Step By Step User Interaction Pattern?

Jul 1, 2011

I have a wizard where users need to fill out data. You cannot navigate to the second step until first step is completed.

I enforced this behavior by disabling/enabling "Next" button, but I really do not like this solution, since it seems not really elegant or safe here. What is the good approach on building step-by-step processes with enforcing step completion.

View 1 Replies

How The Code Works When Executed From First Step To Last Step

Feb 24, 2012

I'm trying to understand how this code work step by step but I'm confusing How the code work when executed from first step to last step?example: when I set obj to age = 39 . is the first step is checked if the variable in m_Age or checked in Property Age

vb
Dim obj As New Minimal obj.Age = 39 MsgBox("after setting the age to 39, age is " & obj.Age.ToString)
vb
Public Class MinimalPrivate m_Age As Integer Property Age() As Integer Get Age = m_Age End Get

[code]....

View 1 Replies

MS VB 5.0 Step-by-Step Practice Files ?

Mar 31, 2009

I seem to lost the practice files disk for this book, and I am trying to 're-learn' this book. I am unable to do the lessons without the practice files. If you have the disk and could maybe zip them up and email them to me? I have the other disks still, and am using the Visual Studio Express to do this.

View 2 Replies

MyCheckbox Vb2008 Step By Step?

Aug 10, 2009

Is this the correct forum for questions regarding code in the Visual Basic 2008 Step By Step? If so I would like to know why there is a declaration for one PictureBox and not the other. If there is a better forum for Michael Halvorson's book, can anyone direct me there?

View 11 Replies

Why VB Code Is Not Executed Step By Step By Using F11

Jun 13, 2011

When I started to work on this new project in vb.net 2010, I put many breakpoints to try to understand the execution order of the project, only to find it in vain. Step into command F11 should work correctly according to Visual Studio 2010: Step Into Property/Function(F11) doesn't work as expected. But I when I pressed F11, I found the code is jumping from one place to another based on breakpoints, not line by line or step by step.To give an example, please see the code below

Me.tcData.Alignment = TabStrip.TabControl.TabAlignment.Bottom 'line 1-breakpoint
Me.tcData.Dock = System.Windows.Forms.DockStyle.Fill 'line 2
...
Me.tcData.TabsDirection = TabStrip.TabControl.FlowDirection.LeftToRight 'line 3

[code]....

When I press F11 at line 1, it goes to the property 1. After it returns, when I press F11,it goes to property 3 directly, without accessing the code in line 2 and line 3.I do not understand why the code is NOT executed step by step by using F11. If I put breakpoingts in line 2, then line 2 is executed.So it seems to me that the showed execution order is based on breakpoints! So if I put breakpoints at different places, the showed execution order would be different! Thus, it is impossible for me to really understand the execution order.

View 1 Replies

Work When Excuted From First Step To Last Step?

Dec 24, 2011

I'm trying to understand how this code work step by step but I'm confusing How the code work when excuted from first step to last step? example: when I set obj to age = 39 . is the first step is checked if the variable in m_Age or checked in Property Age

vb Dim obj As New Minimalobj.Age = 39 MsgBox("after setting the age to 39, age is " & obj.Age.ToString)

[Code]...

View 5 Replies

VS 2008 For Each Loop (Step Through / Into)

Jul 5, 2009

The following code is executed at an interval of 60000 milliseconds.

[Code]...

I tried doing a step through starting at a break point i put at the For Each line. It will go inside the For Each loop but when it reaches the first if statement and it finds that if statement false it will not go to 'Next' and continue to execute the loop instead it goes to End Sub. I want to be able to view what is going on inside the loop, i think the final upload process works so it does do the loop, though i can't step through to view it.

View 4 Replies

Code That Doesn't Works Runtime But Works Step By Step?

Jun 26, 2010

this is my code:

Dim WB As WebBrowser
WB = GetPage("http://speed.travian.ir/a2b.php?z=" + VillageID.ToString + "&c=" + Type.ToString + "&" + AttackParams)

[code].....

View 9 Replies

VS 2008 Computer Restarts And Mapped Drive Appears Under My Computer?

Mar 31, 2009

Problem:When my computer restarts my mapped drive appears under My Computer. When I try to use it from code I get errors. If I open the mapped drive by double clicking it, and then try the code, it works. What I discovered is that when my computer starts the status, using net use, is

[code]...

View 5 Replies

VS 2008 - Share Files From A Computer To A Computer That Are Connected In?

Dec 21, 2009

How do you share files from one computer to another that are connected in one wireless internet connection? I mean, it's possible using shared folders this means it could be possible in vb.net too..

View 1 Replies

VS 2008 Finding A Vertical Progress Bar That Will Step By 0.01?

Dec 3, 2009

Is there a Vertical progress bar that will step by 0.01

View 7 Replies

IDE :: 2008 Express: To Step Into Properties - Go To Tools -> Options -> Debugging

Apr 2, 2009

I get this message whenever I'm trying to debug using VB.NET 2008 Express: Step into: Stepping over property 'ReadTnsNames.ClassTnsNames.set_Name'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.

[Code]...

View 6 Replies

VS 2008 How To Get Frame Timer Interval By Movement Step Of Pixels

Aug 8, 2009

I have been making an online role playing-game in VB2008 and inside the gameloop for the client there is some code that "smoothes" out the movement (instead of it being choppy from tile to tile.) It works pretty well but I'm having problems figuring out a math formula to get a good frame timer interval to set how fast the frames change based on how many pixels they can move per loop.Testing stuff out I found that 250ms is an ideal frame timer interval for 1.0 pixel movement per loop. If I were to double the movement step of pixels by 2 lets say (2.0 pixel step per loop) I found that the frame timer interval should be around 125ms. How can I get the frame timer interval by the movement step of pixels? In cases where the movement step can anything between 0.1 to 4.0 pixels.

View 3 Replies

Move Between Forms - The Menu Move Step By Step When The User Move Between Forms

Apr 8, 2011

Im working on my project. and i just asking if i can used this Property in vb. NET [URL] when i install adobe photoshop .. i see on the leff installer...something like a menu and the menu move step by step when the user move between Forms

Welcome
Serial Number
Adobe ID
Install
Finish

How i can create like this in VB .NET

View 1 Replies

Sockets - Check That If Another Computer In The Network Send Some String Data To The Listener Computer?

Mar 19, 2012

i have a task to create a TCP Server (a program that is listening on its network card interfaces for incoming data stream).I have search on the internet and i found that i can use two methods : Socket or TCPListener class.I have created an example for Socket class, but i wondering how could i test it? I need to check that if another computer in the network send some string data to the listener computer , then this message should be displayed.Here is the example from microsoft that i am using for TCP Server using Socket:

Public Shared Sub Main()
' Data buffer for incoming data.
Dim data = nothingc[code]....

But it does not work because of the PORT setting.If in the TCP Server i have "Dim localEndPoint As New IPEndPoint(ipAddress, 0)" the client crashes, but if i change the port from any (0) to 11000 for example,the client works fine.Do you know why?

Later edit2:Maybe i should have started with this question:Which method is recommended for my scope?asynchronous or synchronous method ?

View 2 Replies

Developing A Computer Application Designed To Monitor The Network And CPU Statistics On A Computer?

Jan 29, 2009

I am developing a computer application designed to monitor the network and CPU statistics on a computer remotely. The monitored computer would have my program installed and the monitoring computer would display, in a form, the information being sent from the remote client.The application does not send any information regarding packets, user names, passwords, etc. It is solely meant for monitoring CPU performance and Network resources remotely.

What would be the best method to send this information over to my host machine?I am programing in Visual Studio 2008 on windows XP. The client machine is also XP. I know this sounds a little shady, but it is required for my little business (http://www.iquorum.net) to monitor what and when something happens on our machines when I and my employees are away.

View 2 Replies

VS 2005 : Dial A Computer From Another Computer Using Modem For Sending Files And Message?

Jul 11, 2009

I am trying to dial a computer from another computer using Modem for sending files and messge.Follwoing is the code done in dialing computer

Text1.Text = "Test string from App1 "
Number$ = InputBox$("Enter phone number:", "Number$")
If Number$ = "" Then Exit Sub
Temp$ = Status

[code].....

But after the dial tone, i am getting the exception "CTL_E_GETNOTSUPPORTED " at the line MSComm1.Output = Text1.Text?

View 6 Replies

Access The Data Coming To The Computer From The In-built Bluetooth Module Of A Computer On Windows Platform?

Feb 4, 2011

i have encountered a problem, i want to access the data coming to the computer from the in-built bluetooth module of a computer on windows platform, this data has been sent by a remote bluetooth module say a by an autonomous device (just like a bluetooth mouse connecting to the computer). The to be sent is in the form of numbers and i need these to manipulate on the computer.

View 6 Replies

VB - Desktop Computer With Cable Connection On Back Allows To Watch TV On Computer Using Windows Media Center

Jun 12, 2010

I have a desktop computer with a cable connection on the back that allows me to watch TV on the computer using Windows Media Center. I had the idea of writing a program that would access this feed and send it to another computer (laptop) via my network. That way I would be able to watch TV from anywhere that my network spans. I have no idea if this is possible or how I would even do it,

So I have three questions.
1: Is it possible?
2: How would I go about access the feed?
3: How would I send it over the network?

My original thought was doing it in Flash, but I'm not very good at Flash so I wanted to do it in VB.Net.

View 2 Replies

Copy A File From A Local Computer To A Remote Computer On The Network?

Dec 19, 2006

I need to copy a file from a local computer to a remote computer on the network, if i try to use File.Copy without logon i get the following error:"Logon failure: unknown user name or bad password."How do I provide user name and password for file copy?

View 2 Replies

Lookup For A Specific Computer Given Ip Or Computer Name ... Retrieve The User Logged On

May 21, 2010

how can i look up for a specific computer given ip or computer name ...retrieve the user logged on..

View 2 Replies

VS 2008 MENU Bar - Don't Have The "Step Into Option" From My DEBUG Menu

Aug 7, 2009

Two(2) Things. I don't have the "Clickonce Option" when I select BUILD for the menu bar. I also don't have the "Step Into Option" from my DEBUG menu. Do I have a problem? Or do I need to turn something on?

View 4 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved