I have a very strange bug, I can't really find any reason so far why it's happening..I have a Listview doubleClick Event that fires twice.. for no specific reason, even if I go very slow (carefully) to dbl click properly.But when I put a BP to check what's happening,
View 5 RepliesUsing VS 2005 I've created a project with some form on it. Each of the forms are fairly similar in structure and I have copied the contents of one form to another form etc. I have code the loads the data into the ListView on each form and that works fine but when I put a Click event on the ListView, it doesn't fire. I created a new project to do some testing and put some items in the ListView and the Click Event fires when I expect it. What am I overlooking? The code for the Form is included below: it loads the data fine and I can select a line in the ListView but as previously stated, the Click event just won't fire!
Private Sub frmViewRequests_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Try
[Code]....
As the subject describes, once I implemented support for DragDrop - The DoubleClick event of the ListView control no longer fires.An overview of the code is as follows:
Private Sub ListView_MouseMove(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles ListView.MouseMove
[code]......
I have a VB (.NET3.5) project like this:
- form1: IsMDIForm = true.
- form2: adding a list view with 2 records, select first record, and register the event ItemSelectionChanged.
- Add form2 as a child of form1 (form2.MDIParent = form1).
- When use "form2.Show()" -> the event ItemSelectionChanged firing three time:
+ 1st: SelectedItem = 1
+ 2nd: SelectedItem = 0
+ 3rd: SelectedItem = 1
I want to know the rootcause (not Solution) of thi issue, can anyone help me !?
Project code: http://www.mediafire.com/?hhhdzh5te1wrod4
I have a series of radio buttons in a Group Box on my main form. When I run the program, the first step is Sub New and the InitializeComponent() procedure.
It then immediately goes to the first radio button CheckedChanged event. This even currently contains some programming to access information from a database table. However, the program hasn't even gone through the process of opening the database and logging in. This doesn't happen until after my frmMain.Load event. However, this happens after the CheckedChanged event for some reason. So now that I have included the data requirement, I am getting errors because the reader is opening before the connection opens. I know I can set up a Try....Catch....End Try to avoid a user error, but ...I thought the form would have to load before anything about the controls happens and then since I haven't clicked anything, I am not sure why the event is triggering.
I'm making a webbrowser that automatically refreshes till a link changes, then it makes some procedures.
I know that refresh methods dont fire the documentcomplete event so what could be a solution for my situation?
I have a web site that I want to check for a html link modification, for that I need to refresh it every 30 seconds.
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
WebBrowser.Navigate("www.google.com")
[Code]....
i have a databound datagrid in vb.net 2008. This is a program where i use the double click event multipal times.. but for some reason on a new form it's not working anymore. In code behind i selected the datagrid and double click event. when i double click on teh grid in debug mode, it never fires off the event(i put a breakpoint in). I've tried several other events and none of them are firing.
View 1 RepliesI'm not even sure what I need to know. None the less lets say I got a timer with an if event to check if said event is triggered then it fires off some code. The problem is if said event is triggered it keeps firing off the code and I only need to do it one time. Whilst letting the timer keep checking if event happened. I hope I worded that right and here is a rough translation in code. [Code] Is there a way to keep checking if an event happened and only fire off the code one time?
View 1 RepliesI am trying to put an extra event in, UpdateID and it's not firing.
[Code]...
I've got a listview with checkboxes activated. When I load data into the list view I have an:
View 2 RepliesI am using a monthcalendar inside of a panel. when the user changes the "showweeknumbers" of the calendar I need to move some label to the right of the calendar, but I also need to resize the panel. The problem comes into play when the user hides the weeknumbers, the monthcalendar resize event fires and the labels move, but the panel resize causes the month calendar to fire the resize event again, making the labels all out of wack...
View 1 RepliesI've been looking for a solution to this for several hours now and cannot find a solution.
The Scenario:I have a masterpage baseclass (called basemaster)All of my master pages inherit from basemaster
basemaster defines an event 'Public Event HandleClickEvent As EventHandler'I have a masterpage named master1
master1 defines an event handler 'Public Shadows Event HandleClickEvent As EventHandler'master1 has a user control named usr1 usr1 has a button that raises event ButtonClicked when clicked I have a page (thePage) that uses master1 thePage has a button click event handler that it registers like so: 'AddHandler Master.HandleClickEvent, AddressOf HandleTheClick' master1 has code something like:
Protected Sub Usr1_ButtonClicked(ByVal sender As Object, ByVal e As System.EventArgs) Handles Usr1.ButtonClicked RaiseEvent HandleClickEvent(sender, e) End Sub when thePage loads I see it register the handler on master1 when the button is clicked, Usr1_ButtonClicked is fired and I step through the RaiseEvent but HandleClickEvent on thePage is never reached.
i have a page which dynanically create a link when it load, after i click on the link it should loop in the database fetch all the record and display another set of link , then when i click on these link it should give me all information about this particular record it like this one
Q: when the page loads, it creates the first link which is associated with an event handler, it fire the first event handler (Getname) but it not firing the second event handler (GetnameDetails)
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
If ViewState.Item("nameload") IsNot Nothing Then
If ViewState.Item("nameload").ToString = "True" Then
[Code]....
The following code was working the other day. Now it isn't. When I type a character in the textbox the event doesn't fire.
[Code]...
why the event would just stop firing?
I'm trying to make it so this the cursor will jump to the next textbox after the user enters 1 character.
OS: MS Server 2003
Visual studio 2005
I had a button on a page that worked at one time and all of a sudden stopped working.
[code]...
[url]...and have applied the vb code. The problem I have is that the user doesn't navigate within the datagridview. They click a save button on a toolstrip. As the user doesn't move from the current cell then the cellvalidating event doenst get fired. [code]...
View 5 RepliesMy ie.documentcomplete is not firing from my installer but it works fine from my source.I don't know where i m going wrongmy working environment
For Each Me.ie In New ShellWindows
If GetForegroundWindow = ie.HWND Then
AddHandler ie.DocumentComplete, AddressOf _
[code].....
We're trying to design a toolbar to use as an addon in another program. we want to set one of the buttons so that when u single click it, the image on the screen is blanked out. And when you double click the same button, it blanks everything except the selected image. However the DoubleClick event doesnt seem to be working at all.
[code]...
I have two forms that I worked on separately, each has an event load button that works with a datagridview without any problem. but when I created a third form and moved the buttons on it and try to update the datagridviews on the two forms, it doesn't fire up here's my
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]...
Here is the .aspx code snippet.
[Code]....
Below is my databinding code. It is called from Page_Load()
[Code]....
Bind data to datasource of dropdown control when it is not postback Control was added from toolbox tried adding event handler in .aspx. Still did not work.
I've bound a bindingsource to a datagridview and each time i move the cursor on the datagridview to a different row, the positionChanged does not fire. This event handles other bindingsource too and I hv no problems with other datagridviews.
Im couldnt work out the behaviour for this particular datagridview.
I am running VS 2008 and building my app on a Windows 7 box. The main form/window has a KeyDown event handler as follows in it:
Private Sub Form1_KeyDown(ByVal sender As System.Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles MyBase.KeyDown
MsgBox("control = " + e.Control.ToString + ", shift = " + e.Shift.ToString + ", e.Keycode = " + e.KeyCode.ToString)
When I build it and run it within VS it seems to run fine. The messagebox appears with the state of the control and shift keys along with the key code of the key I pressed. However, if I take the executable and run it on an XP box (both using .Net Runtime 3.5) as soon as the main form opens, the messagebox appears. Basically the "KeyDown" event seems to be firing without any keys being pressed. The messagebox comes back with: "control = False, shift = False, e.Keycode = None".
How is this possible? How can the keyDown event be fired when no keys have been pressed (as is confirmed by the output contained in the messagebox?) how I can diagnose this on the XP box since it does not have Visual Studio on it?Update I tried creating a brand new project where there is only "form1" and the only code behind this is the keyDown event handler. It just opens a blank window and pops up the message box if a key is pressed. It worked as expected on the Win 7 box but when I moved the executable to the XP box, it immediately popped open the messagebox without pressing a key.
I am developing a Vb.net .Net 3.5 PDA application using the OpenNetCF IOC framework. I have set up and event to handle the navigation through the smart parts but when I raise the event the EventSubscription does not fire.
[Code]....
I have a user control on which the button click event stopped firing even if I add a new button. It can be noted I'm using Telerik RadControls: RadButton specifically.
There's nothing special I'm doing to reference the elements:
<telerik:RadButton ID="RadButton1" runat="server" Text="RadButton">
</telerik:RadButton>
[code].....
I have a user control on which the button click event stopped firing even if I add a new button. It can be noted I'm using Telerik RadControls: RadButton specifically.There's nothing special I'm doing to reference the elements:[code]....There's also an ordinary i have that doesn't fire either.
View 2 RepliesI have a masterpage in which I attached a content page. Now, I added a button which is running at server and placed a code, MsgBox("hi"), in its click event. I placed a breakpoint in its click event and played it to see if it's firing and it clearly did not.
[Code]...
Private Sub dgvEquipTran_DefaultValuesNeeded(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewRowEventArgs) Handles dgvEquipTran.DefaultValuesNeeded
e.Row.Cells("ID").Value = Me.cbxID.Text
e.Row.Cells("Rate").Value = 12
End Sub
I've got the above event setup. However after select and delete the last row of a one row datagridview, the above event doesn't fire. Even when the current selected row is the new row (one with *). I have to click away, on the next tab and back again before it is fired and populated the new row with the values.
I have a form with about 40 checkboxes. Once a checkbox is checked, the div control's property should be changed from "none" to "block" or vice versa. I don't get an error, but the checkedchanged event isn't handled. Here is the markup:
<tr>
<td class="sectionSubHeader lightgrey">
<asp:CheckBox ID="chkbxCOMAEFund" AutoPostBack="true" runat="server" />[code]....
I used a timer in my user control now when Timer_Tick event is fired I want to raise an event like Ticked. I created:
public delegate sub myDel()
public event myevnt as myDel
in Timer.Tick
I used raiseEvent myevnt. I also raised the event from a button click. This event is handled in a windows form where the control is used, My problem is event is firing when the button is clicked but not firing from the timer.tick. Is there any problem from Timer.Tick.
I have a tabbed container, each tab has the same controls but for a different target. I am using a timer to control when to fire each event from the 5 different tabbed controls, my problem is this. The event only fires when the focus is on that specific tab. So when an event on tab2 should fire, if i am looking at tab1 then tab2 event does not fire.
[Code]...