I have a setting and I would like to know what line of code I would use to lower/raise that integer. Would it be
My.Settings.Exp = -100
Or what I don't want to take it all away just the amount that I put. Or raise it the amount that I want.
I am very confuse over a Raise Events example and using delegate as a function pointer: I am clear with this function pointer example program below which creates a generic sort function for sorting integer arrays without changing the main sort function.
' Returns True if need to swap
Delegate Function CompareFunc(ByVal x As Integer, _
ByVal y As Integer) _
As Boolean
Here are two alternative target methods for the delegate - one for an ascending sort and one for a descending sort:
Function SortAscending(ByVal x As Integer, ByVal y As Integer) As Boolean
If y < x Then
SortAscending = True
End If
End Function
Function SortDescending(ByVal x As Integer, _
ByVal y As Integer) As Boolean
[Code] .....
I am rewritting my application to conform to ms standards. We used to save all settings to registry for user settings, servername, size and locations.so we are now saving them into My.Settings app.config the only problem is that each time there is an update clickonce will isntall the newupdate but now all settings are loist and user has to save everything all over again..
I am trying to follow the book here but it seems i keep getting stuck somewhere. registry has worked fine for years but i understand we must move on, but if stuff like this happens then i just wasted a long time converting all code to conform for it to not work..
I have created a settings-file for my plug-in-based app. When the mainApp writes the settings to the file, the pluginApp should read the settings from the settings-file (when opening or at runtime even better), but somehow it reads the settings from the app.config-file. This means that the pluginApp never will read the settings according the values of the file.
View 4 RepliesI saw that you can also use a "Settings File" (Add new Item)to add your settings instead of the application settings. But I can't seem to write any values to the file. Someone with experience with the "Settings1.settings"?
View 2 Repliesi guess the title pretty much states the question but i will give the senario to be more clear. i have a mousemove() event which i add in my program programmatically and i need a way for raising that event (again) programmatically too. raiseEvent control_mousemove() doesn't work as it says that "'control_MouseDown' is not an event of 'main'."
[Code]...
I set up some application settings for checkboxes on an app and then decided to remove them. When I set the Application Settings to (none) in the designer and restarted the app, the checkbox constantly checks and unchecks itself. I completely remade the app and removed the file that is used to store my.settings in the Local folder of the user's appdata profile. I also made sure to uncheck the "save my.settings" on shutdown.
View 6 RepliesCan somebody explain the second one to me? I'm not clear on the concept.The first one I know is an array of integers. but what about the second one?
View 2 RepliesIs there any difference between these two ways of declaring a Integer and setting the value to zero? vb.net Dim x As Integer = 0' or...Dim x As New Integerx = 0 Is one way better than the other in any situation?
View 15 Repliesive got some simple problem i cant understand how to solve.
str(1) is an array and integer(or double, tried both)
a(1) is an array and integer (or double, tried both)
a(1) = a(1) + 1
Label1.Text = str(1) + a
the big part is where i get: operator '+' is not defined for types 'integer' and '1-dimensional array of integer'.why do i get that message and what does it mean? how do i make the code do what i want?
I faced an error when upgrading VB6 code to VB.NET. The error occurs at AddressOf WindowProc
AddressOf expression cannot be converted to 'Integer' because 'Integer' is not a delegate type
My declaration for SetWindowLong is:
Declare Function SetWindowLong Lib "user32" Alias "SetWindowLongA"(
ByVal hWnd As Integer,
ByVal nIndex As Integer,[code]....
What is the reason for the error I get?
I'm trying to create a linked list of an array of integers. Why is the following implicit conversion required?
When I run the code that contains that conversion, I get the following error.
As a real-time data acquisition user control data (a packet of an array of bytes) arrives every second, is converted into an integer array and inserted into a linked list.
The most recently arrived data is painted as coordinates on a grid at the right of a PictureBox using Graphics.DrawLine (pen,X1,Y1,X2,Y2).
The oldest data (arriving 120 seconds ago) will be drawn at the leftmost portion of the Picturebox.
Why a linked list rather than a list? To display 120 views of time sequence data, the draw routine the most recently inserted node to a node that points to Nothing. How do I limit the length of the linked list to 120 nodes and always ensure that the last node points to Nothing?
Do While Not item Is Nothing
item = item.NextItem
Loop
Does any one know the dialog below like a lower third?
View 1 RepliesI am a newbie in VB and I got a piece of code which can display the current running program. I need to use that in VB2005 and I got the below error message. Can anyone help how to fix it?[code]
View 18 RepliesI'm trying to convert a VB6 project to .NET, but I get problems with some callback functions, and the following message comes up: "AddressOf' expression cannot be converted to 'integer' because integer is not a delegate type" I've seen several solutions to similar problems like this, but I am not able to understand this issue with delegates.
After the conversion, the code look like this:
Declare Function vsmsgwSetDataPackageCB Lib "vsmsgwW.dll" (ByVal PACKAGE As Integer, ByRef arg As Integer) As Integer
Dim arginitP As Integer
[Code]...
Which gives the error: Method 'Public Function PackageCB(HisNodeID As Integer, ByRef data() As Byte, ByVal length As Integer, ByRef arg As Integer) As Integer' does not have the same signature as delegate 'Delegate Function DelegatePackageCallback(hwnd As Integer, lparam As Integer) As Integer
I have a LINQ2Entity problem, I want to get the value, string, from a database, so I select FProducts.Serial_number, and to end the query, I do .ToDictionary. The problem is, it tells me that it doesn't have sufficient parameters, to convert ToDictionary. So I need something like select FProducts.Serial_number, Nothing). ToDictionary. Also FProducts.Serial_number, 0).ToDictionary doesn't work.
Sub GetStatistics(ByVal ProductNumbers As List(Of String), ByRef Passed As Integer, ByRef FailedProducts As List(Of String))
Passed = 0
FailedProducts = Nothing
[Code]...
this is for a BINGO game final project that I already turned in but this just bugged me that I could not get the sorting figured out. I am trying to get this to sort the random numbers in to columns under the correct letters but I keep getting the error Operator '>=' is not defined for types '1-dimensional array of Integer' and 'Integer' under the line:
[Code]...
I am new to EF Linq and I have been struggling with this query for a few days. From reading this forum, I have managed to get this far:
Dim noPic = (From f In myEntities.FriendLists
Where (f.UserID = Profile.ID)
Select f.FriendID).Except(From g In myEntities.GuestLists
Where g.EventID = _id
Select g.FriendID)
[Code]...
I am trying to get everybody from the FriendList who is not already on the GuestList to display in a Repeater control. After reading the forum I was able to append .First() to noPic at the myNoPic declaration and finally get a result but that only gave me the first element. Does anybody have any advice on how to accomplish this?
Why doesn't CDate(integer) work where integer has format of YYYYMMDD ?and why won't this stupid site let me submit such a short question when I have nothing else to add except some waffle at the end
View 2 RepliesThis is giving me a headache. I have this link query here that grabs an ID
Dim mclassID = From x In db.SchoolClasses Where x.VisitDateID = _visitdateID Select x.ClassID And then later on I have this linq query
ViewData("Staff") = From t In db.Staffs Where t.ClassID = mclassID Select t
I've tried quite a few things but to no avail. I've attempted casting, converting, Is operand, etc.
Is it possible to have smaller intervall than 1 in a timer?
View 7 RepliesThe company has been using Visual Studio 2008 and .NET Framework 2.0 for approximately 2 years. During that time we released several versions (4.x.x) of our program to the public and were able to preserve the user's settings using My.Settings.Upgrade.During the past development cycle we upgraded the program to Visual Studio 2010 and .NET Framework 4.0 and changed the version to 5.x.x. Now, when a user upgrades from 4.x.x to 5.x.x they lose all of their settings.However, in all upgrades after that point (ie 5.0 to 5.1) all the user's settings are once again preserved.I checked C:Documents and Settings<USER_NAME>Local SettingsApplication DataCompanyName and it contains two directories:
ApplicationName_Url_aaa ApplicationName_Url_bbb
where aaa and bbb are 32 character strings. All of the user.config files for the 4.x.x releases can be found in the ApplicationName_ Url_aaa directory. All of the user.config files for the 5.x.x releases can be found in the ApplicationName_Url_bbb directory.Based on this information it seems like something changed when we converted our program to VS2010 and Framework4 that is now causing a different 32 character string to be generated. However, we have been unable to track it down.
I have the following structure:OLD: frmMain (WinForm)uscStat (UserControl with Grid) In frmMain I'm able to make some settings and load the result of the settings via LinQ into the Grid of the uscStat.
[Code]...
I just wondered if you can or can't save arrays using the settings system object. There seems to be no way of entering it at designtime. It seems implied you cannot create new user settings.subobjects at runtime. I'm looking to find the easiest way to save a populated array of PictureBox's. If the only way is a self/custom made/managed .ini file then I need to know so i can start on that but I was hoping to use some of all this phaff in the new frameworks usefully.
View 3 RepliesIs there a way to maintain application modified Settings in the settings files after a program update? i.e. I have 10 or so values in the settings file and the users can modify them... when I send a program update they revert back to what I initially programmed them to be.
View 3 RepliesHere is what ive got:
a1 = inputbox("YES or NO")
If a1 = "YES" Or a1 = "yes" Then
That's all we need to know. There are a variety of choices people could put in the input box:
YES
YEs
YeS
yES
yes
Yes
yEs
yeS
I don't want to do if a1 = "YES" or a1 = "YEs" or ... etc
Is there some way I can do:
if a1 = allcase."YES" then
Or something along the lines of that?
If I have a low level dll called low.dll. I then create another dll, say my.dll that references low.dll.
Now, if I create an application that references my.dll, I should not have to reference low.dll in the application correct?? This does not seem to be happening. The application will not compile as it cannot see low.dll, even though it does not access it directly.
Heres my code so far:Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]...
I want the total sum entered for (Val(InputBox("Enter sales amount:"))) that is lower than 1200 to go in a TextBox2.Text and the total sum higher than 1200 to go in a TextBox3.Text.How should I go about doing that? Is there a way of doing it in the Select Case area?
Heres my code so far[code]...
I want the average above 1200 going in a TextBox5.Text and the average lower than 1200 TextBox6.Text.
I've tried stuff like; "average1 = average1 + average" and "average1 = total1 / subject" and average 1 = total1 / subject1". But none of it appears to be working.
I'm currently using this bit of code to let only Y, N, and Backspace be typed in my textbox: [code] My problem is that when I debug, the "n" has to be capitalized in order for it to show up in my textbox and the "y" has to be lower cased. Is there anyway that I can bypass this to where it doesn't matter wether or not it is upper or lower case?
View 4 Replies