1)i don't know how to make my piano play a file while the button is clicked only instead of playing a file to media-player until it has ended!2)Also i dont know how to make the mediaplayer play the file from my.resources i added instead of the my files on the c:example.wav.
I am having problems clicking a link on a page.I was thinking of trapping the click events in the web browser when I manually click the link to see if it uses any other post variables from that page or what happens when I click the link.
create a simple control. The control have 1 label and 2 panels with images. The control needs to be clicked, the problem is i can create the click action for the control, i can only use internal click events. how to use it out of the control.
Im wondering how can i execute this code properly.. it seems i need to click the tabpage twice before my 'Save_Set_' button will take prompt or action..
Private Sub TabPage1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TabPage1.Click teleport_controller = 1 '<--- declared as integer End Sub[code]....
tabpage1 and tabpage2 are under in tabcontrol1 control.. the problem here is when i select to this tabpages my save_set button doesnt execute for the code.. but if i click the tabpage again its working... i dont like this kind of action at all..
I have a checked list box having some items .When I click any item it first select the item and then when I again click it then check box is checked/unchecked How to change this behavior means I want to perform selection and check/uncheck action in a single click.
Imports System.IO Public Class Form3 Const IMAGE_DIRECTORY As String = "C:images" Dim files As String() = Directory.GetFiles(IMAGE_DIRECTORY) Dim max_length, i As Integer Dim s, fname As String
[Code]...
I simply want to have a list of all graphics saved in specified folder displayed as miniatures - this suppose to be a sort of an image browser - it does not have to be done using ListView, so I'm open to any suggestions.
a datacontext defined in a module(domain services ado.net ria)a page having add/delete methods whenever any method is executed, it is found that all the previous actions (NEW RECORD ADDITION and DELETION OF RECORDS) are carried out before the new action is carried out normally
this behaviour is not prominent but "when using break points and inspecting the values of the variables and table object to be added to context, it is clear that all the previous actions take place again. even when the datacotext. savechanges is called, even after that still all actions carried out on the datacontext repeat themseleves, when any new action is to be carried out
I've designed an Order Entry System and now I'd like to send an email when an Order has been saved to the Database. I could probably do it from the client machine pretty well, but really what I was looking for was to inform another program running on the server that an Order has been saved into the database with OrderID:xyz. And have that program take care of sending the email. I have no problem designing this second program, in terms of the basics of responding to an event and sending an email. But my question is: how do I raise an event across the network that this other program will respond to?
I have one executable application (*.exe) compiled in Nullsoft's NSIS. So what I need is to get object name for 'Next' button and simulate it's action [basically what I mean is to create button in VB and when I click it it will go to the next page of Nullsoft NSIS Installer in Nullsoft Window].
vb.net Private Sub UpdateLVItems(ByVal Index() As String) lvDrives.Items.Add(Index(1)) lvDrives.Items.Item(Index(0)).SubItems.Add(Index(2)) lvDrives.Items.Item(Index(0)).Tag = Index(1) End Sub
im using an open source backup tool and im going to add extra functions. [Code] All in all im wondering how i can incorporate "sleep" into sleeping until the selected time, and then performing the backup.
I am trying to make a Process Estimator application. It should tell the user how fast hes computer is. The output should be the number to calculate to and how much time did it take in mili-seconds (timer interval set to 100). I enable the timer before it starts calculating, but the problem is when it start calculating the timer stops for some reason...
This is the Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick TextBox2.Text = CInt(TextBox2.Text) + 1 End Sub Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click [Code] .....
I've created a program that creates a registry value when it is run, and when this program is uninstalled I need it to remove this registry value if it exists. So I wrote a little command line VB.NET program that simply checks for the reg value and removes it if it exists and I added this to the Uninstall section of the Custom Actions tab in the Visual Studio deployment project that I created for this app.
I know that the command line app works because if I run it myself manually it deletes the registry value, but when I uninstall my application it does not remove the registry value so obviously this command line app is not being executed.
in load of my form, i create automaticly some radiobutton in relationship with the number of Categorie in my BD i hope that when i check for exemple the radiobutton1, it show me (" hello all ")
in reality i don't want to show that, but it just for to simplify my question
this is my code for creation of radiobutton : Private Sub Gh_Produit1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
I was observing my programs process in the task manager and noticed each action made to the program made the memory continue to rise. So I added a Garbage Collector and since it's my first time using it im not sure if I implemented it right. I haven't gotten any errors but I ran some tests I would like to go over with everyone. After adding the GC I was able to notice a change in the memory my program used- it was reduced.I added the GC to the main forms formClosed event of my application which is used in different scenarios. I also added it to the panels paint events before I tested the program. And noticed a quicker reduction in memory. The Form i mainly use called frmLine1t5. This form calls to the database based on which line to test. Then the form sets the controls that were added in design view to be enabled or disabled based upon the product for that line. This process was easy to implement.I Load each new frmLine1t5 to a collection of the form so people can run multiple tests using the same form. This helped so i didn't have multiple forms for the same type of process. I had to access the forms through a collection so I knew which controls to populate to the correct instance.
I noticed during my testing that I can not add more than 50 items to this collection. The problem is that I remove the key from the collection upon form closing, so I dont know why it has gotten to 50.The test I made Runs two timers. Timer 1 is set to tick every 4.5 seconds This timer loads a new form and tests a new line of product.Timer 2 ticks every 5 seconds and closes the previously opened form.I have it get the GC Total Memory upon loading the form of frmLine1t5 and upon closing the form of frmLine1t5.the results are shown in the picturesThe errors i have gotten occured when ChildForms Open: had reached 50Here are the errors:
[code]...
Possible Causes:I think that upon Form Closing it is taking longer to finish closing before a new form is loaded... But isn't vb.net suppose to finish any unfinished threads? Even if the program is single threaded?And because the form closing isn't "happening" then the key is not removed from the collection.
i have a button and if a specific option is set (via a checkbox) then once every 5 times the button is clicked an extra event happens.I thought a counter/Integer would be the way to do it but i cant seem to get it quite right, heres my code i have in the buttonclick event:
How can i send a POST command to a login form's action...in easier words. how can i login to a webpage without opening it in a webbrowser control and after that how can i send text from a vb application to a webpage(sort of like posting) im making an autoposter application.
If u dont know wot an autoposter is see this:
Quote:
This program posts inside many forums (you can choose). It's main objective is to allow a user to distribute their posts to many forums easily without opening each individual page on the in a web browser therefore you get more points to your filehoster's account.
Note: you must still create each forum's account manually.
If u want an example of an autoposter...go here [URL]
if i'm creating the listview using the new listview instead of actually putting a listview on the form directly. how do i access the listview.click and mouseup.click etc..since there's no lstview until the program loads?
this event works ok, but the problem is that I don't know what field was clicked. Should I use objectinfo or something else? VB.net won't recognize for example e.objectinfo.
I am having trouble with a separate program that keeps saying Adobe flash is not installed. And I have tried everything but it still wont go away (that was off topic a bit). I want to create a program that will auto click the words "Click Here" if the error message shows. Because if I click there then it will work normally until it pops up again.
I have 2 forms, 1 is for control and the other is for display. Its 2 because the 1 for display will consume the whole screen and there's no space for buttons.Im trying to control form4 using form2 or some other form, navigating a certain webpage in the process.
I have this code for the control: but it does not work, what would I do?[URL]..
This should be simple, but the answer is eluding me. If I've got a Save action in my controller, and the save fails, how do I cancel the action without disturbing what the user entered? For example, Index is strongly-typed of "MyTable":
Function Index() As ActionResult ViewData("message") = "Hello" Return View(New MyTable)
[Code]....
In the Catch, if I put Return View(form), I lose the message passed via ViewData. If I redirect to Index, I'll lose what the user entered. I think I've seen the simple (correct) way to handle this before, but if you don't know what to search for, it's hard to find.
I know there are several ways to publish updates but I would like to know the best way to do it. What I already have configured is a shard network folder which I intend to have the program update from there. What would the best way to publish updates to the folder be?
I have searched high and low for documentation on how to use this feature. While the loop I could write would be simple and take no time, I really would like to learn how to use this. Basically I have a class, say, Widget, with a Save() sub that returns nothing. So:
Dim w as New Widget() w.Save()
basically saves the widget. Now let's say I have a generic collection List(Of Widget) name widgetList(Of Widget) and I want to run a Save() on each item in that list. It says I can do a
widgetList.ForEach([enter Action(Of T) here])
....but how in the F does this work??? There is no documentation anywhere on the intrablags.
I am having trouble doing something that is probably pretty simple!I have a stock listing that is done by 1) a simple form with parameters (Index) and 2) an ajax called partial view that displays the list of stock (based on the params).On this same simple form (Index) I have an action link to an "Add Stock" method which calls another form for adding stock.When the user has finished adding the stock I redirect them back to the stock list page (Index).
My issue is that I would like to "remember" the parameters that were initially entered in this form so the user isn't just directed back to a page with blank parameters forcing them to enter them again.I thought I could simply overload the Index method as such:
[Code]...
I get this error: The current request for action 'Index' on controller type 'StockController' is ambiguous between the following action methods:.Now I have read this post and it's answer but I cannot figure out how to implement the solution. Is this solution applicable in my situation? Is there a better way to acheive what I'm trying to do?