VS 2008 Passing Controls To A Function
May 4, 2009
I'm making the transition from VB6 (at which I was quite proficient) to VS2008, and I'm running in to a few 'snafoos' as I go. The most recent one (which I haven't yet been able to work out) is I'm trying to figure out how to pass a control (specifically a 'picture box' if that matters) to a function in a seperate class. This was pretty straight forward in VB6, but for the life of me, I can't seem to figure out how to declare the subroutine.
[Code]...
View 11 Replies
ADVERTISEMENT
May 3, 2009
what i am doing is passing data through to a function, the function does a basic check if the file passed through exists then say so in the listview
function:
Function checkIfCredentialsExist(ByVal Check As String)
Try
If File.Exists("credentials/" & Check) Then
[code]....
View 3 Replies
Mar 23, 2010
VB.NET is not letting me dance with both feet, or piss with both hands. I've got one foot and one arm tied behind my back at every turn. I want to use this statement in a function:
Return CType(Formatter.Deserialize(FS), DS)
Seems doable, right?
Function ReadFileStream(ByRef FS As FileStream, ByRef DS As Object)
Dim Formatter As New BinaryFormatter
FS.Position = 0
Return CType(Formatter.Deserialize(FS), DS)
End Function
Right? I mean, CType only accepts a class name as the second argument. I can't give it an instance of a class, or it croaks. Yet if I try to pass the class name as the argument to that function:
DataInfo = ReadFileStream(FileStream1, DataStruct)
VB.NET croaks on this, too, complaining that "'DataStruct' is a type and cannot be used as an expression.". It's used as an expression by CType just fine outside of the function. Does the VB.NET legislature provide a clause that allows for a 'Type' to be passed as an argument in a function? Writing all the supporting code ten million times to deserialize a file using CType ten million times in a large application will get very complicated and tricky very quickly. It should be handled by a routine so that any cases and adjustments that come up can be dealt with in one spot.
View 8 Replies
Sep 24, 2010
I have a function that requires a form passed to it. Currently im using:ByVal oThisFormA As FormIf I do this though, obviously where I require txtboxes etc from the form being passed in arent recognised. e.g txtSurname is a textbox on a form called frmCustomer I have, but unless I use byVal oThisFormA as frmCustomerI will just get an error txtSurname is not a member of System.Windows.Forms.Form
View 12 Replies
Jul 8, 2011
I would like to know if it is better to pass a listbox for control to a module with SQL stored procedure or to use the List(of ) function.
example:
in the form class---
SQLModule.getPartSearch(txtGroupID.Text.Trim(), txtFirst.Text.Trim(), txtLast.Text.Trim(),
[Code].....
View 6 Replies
Sep 30, 2011
I have to ask a stupid question:How to pass values from my form into the controls of other form?I made textbox and button in my form1 and Label into the form2 When I click the button, I want to pass the values of the my textbox in the form1 into the labels of my form2
I am a student and totally new to vb.net
View 3 Replies
Jun 29, 2009
I create tabpages at runtime each having a flexgrid controls. I need to pass these flexgrids of each tabpage as a parameter to a function byref. This is the code .
[Code]...
View 8 Replies
May 2, 2012
I am working on an application using a form with textbox controls as a menu. Pressing enter while the textbox has focus invokes another form and hides the menu form. The reason for this is a requirement that the mouse must not function at all in thisapplication. Not my idea but it is my job to make it so.The problem I could use some. When the user presses enter on the textbox on the menu form the keypress event is used to invoke the selected data entry form and the menu form is hidden. When the data entry form opens the cursor is supposedto be in the first field on the form but the first controls keyup event triggers and the enter keypress from the menu form is still active so the cursor moves to the second control on the form. Having the enter key move to the next field like tab does is also a requirement.
In the keypress of the textbox on the menu form e.handled is set to True but that does not prevent the passthrough. I realize there are many ways to force this to work as I intend by putting flags and so on in the data entry form but I have many to deal with and would like to find a solution I can apply on the menu form rather then adding code to every data entry form to compensate for .NET deficiencies.
View 9 Replies
Mar 22, 2011
I have a question concerning some homework. Here is my answer:
Dim intResult As Integer
intResult= Square(4)
lblResult.Text = CStr(intResult)
Now, if I understand functions correctly, this statement should pass the value 4 to:
Function Square( ByVal intValue As Integer ) As Integer
Return intValue^2
End Function
...and assign it's return value to "intResult".
View 6 Replies
Feb 21, 2010
Private Function Token() As String
Dim Length As Byte
Length = 10
Dim Chars As Char() = New Char() {"a"c, "b"c, "c"c, "d"c, "e"c, "f"c, _
[code]....
is the above bolded line a correct .. it s not working too and the above code is used to generate a random password for users which should be displayed on the text box?
View 3 Replies
Aug 3, 2011
I am having a problem figuring this out. The text that is bold is where the problem is.
Imports Microsoft.Win32
Console.WriteLine(WMILookup("Win32_Bios","SerialNu mber"))
Private Function WMILookup(ByVal WMIClass as String,ByVal WMIItem as String) As String
[Code].....
View 2 Replies
Sep 8, 2010
I have a .aspx webform, with code behind to handle data entered by user, most fields are in double.At business layer, at other class, let say there is a function: [code]I just wondering whether this is the correct way of writing it? And if I have more than 20 fields of double value, then I should declare additional 20 double value?
View 2 Replies
May 27, 2010
I have a function that search database based on the 2 textbox value. I have a difficulty to call the function and pass the text box value to the function. This is my function: So I get this error:
{"Object reference not set to an instance of an object."}
Function getname(ByVal SearchedName As String, ByVal SearchedFirstName As String) As String
Dim temp As New System.Data.SqlClient.SqlCommand
Dim temp2 = ""
Dim sSQL = " select SearchedName, SearchedFirstName from student where SearchedName =@SearchedName AND SearchedFirstName = @SearchedFirstName"
[Code] .....
View 6 Replies
Jan 31, 2012
I have function in my asp.net/vb application with following signature:Public Function ExtractText(node As XmlNode) As String..I want to call it/pass xmlnode. How to create an Xml node with value:<mynode Id="7743" Type="context" StartNode="4356" EndNode="1234"></mynode>
View 1 Replies
Jun 23, 2011
I am trying to call the method with the following declaration[code]...
The structs should both be twodimensional arrays with indexes of 4,4 and 5,4 respectively. The second one is an out parameter.
View 1 Replies
Dec 29, 2008
I wrote vba function in excel and I want to call this function in vb.net with parameter passing.
View 2 Replies
Jul 19, 2011
Let's says I have a class called Customer :-
Code:
Dim Cust as New Customer("Fred")
I also have a function in a seperate class :-
Code:
Shared Function Example(Example As Customer)
How do I refer to the class itself from within itself? For example :-
Code:
' from within the Customer class, call the Example function
AnotherClass.Example(Me??)
View 11 Replies
Jul 23, 2009
pass an array to a function, like the code below shows
Private Sub SomeFunction(ByVal PassedArray() As String)
For i As Integer = 0 To PassedArray.Count - 1
Debug.WriteLine(PassedArray(i))
[code]....
But is there a way to pass a constant array to a function in VB .Net, for instance in PHP you could write
function SomeFunction($array)
{
for($i=0;$i<count($array);$i++)
{
[code]....
So to reiterate: Is there any way to pass a constant array directly to a function in VB .Net? Is there any benefit in doing so? I imagine a few bytes of memory could be spared.
PS.SomeFunction({"some", "array", "member"}) ' this obviously gives a syntax error
View 3 Replies
Dec 2, 2011
It looks like passing a list's enumerator to a function "byval" is quite different than passing it "byref". Essentially, regular "byval" passing will NOT change the caller's "enumerator.Current value", even if the function advances the enumerator. I was wondering if anyone knows why this is the case? Is an enumerator a primitive like an integer, without an object reference, and hence changes to it don't get reflected in the caller?This function is byval, and gets stuck in an infinite loop, spitting out "1" message boxes, because the enumerator's "current" never advances past 5.[code]The difference between the two functions is only whether the listFirstItem__ function accepts a byval or a byref enumerator.
View 2 Replies
Apr 30, 2009
I am trying to use a simple quicksort routine for a multidimensional array but cannot figure out the syntax. I am stumped because it works fine in VB6 but no luck in .Net
Array Declaration:
Dim sArrIn(25000, 3) As String 'sort key (pkg, kitting, zip), kitting, data
Function Call:
[Code]....
View 4 Replies
Jan 6, 2011
I am missing something obvious here
I have an array that is declared as
Dim
array1(,)
As
[Code]....
View 4 Replies
Feb 18, 2010
MotherTongueTxtBox.Attributes.Add("onblur","val_Length(MotherTongueTxtBox.text,"hi friends",Length);")
in the above statement val_length s a javascript function in tat function the first parameter shd b the contents of the text box ,the second parameter s a string type, is the statement correct i think it s wrong can u suggest a correct valid statement
View 1 Replies
Nov 16, 2011
Trying to generate a Datagridview based on a query which is working fine.
Basic method is:
Create DbAdapter (MySQL) Create DataSet Fill Dataset with DbAdapter.Fill Set Datasource of DG to Dataset
Works fine, have used a commandbuilder to handle updating, inserting and deleting. Where this doesn't work is if I pass a MySQL function in my query, e.g.
SELECT FROM testtable TestID, SomeFunctionForward(someproperty), anothersfield
A quick check shows the field omitted from Update and Insert. How do I go about 'setting this property' so it will work on the query with the CommandBuilder. It needs to be done in inverse, i.e.
INSERT INTO testtable TestID, someproperty, anothersfield VALUES SomeFunctionBackward("somepropertyvalue"), "anothersfieldvalue"
View 16 Replies
Jul 4, 2009
i have a very simple problem but i can't figure how to fix it.I'll explain, i have 3 array named "Auto, Legumes, Films". I i making a function so whenever the selecteditem of the combobox change(Auto, Legumes or Films) the name of the selecteditem is passed to a function. The function use this name to display the items of the corresponding table in a listbox.The 3 different item name in the combobox match the name of the 3 tables, so i want to be able to re-use the name dynamically in my function.
Code where i call the function:
Private Sub ComboBox1_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cbchoix.SelectedIndexChanged
[code].....
View 1 Replies
Dec 9, 2011
This maybe academic but I'd like to be able to pass the MethodBase.GetCurrentMethod() to another function. That way I could split apart the different parameters in one place. What I'm currently doing is something like this...
Sub SomeSub()
Try
'Some code that does work for the app...
[Code].....
View 1 Replies
Jul 20, 2010
I have a Function within a data access layer, which accept a number of parameters. Among these is a decimal value, but in some cases the decimal value with be NULL, here is the code from the function
I am using the following code in my code file to pass the value to the function...
Convert.ToDecimal(textbox1)
How can I pass a NULL value to my function?
View 6 Replies
Nov 21, 2010
I need to convert the following C# code to VB.NET:
public bool TryGetRewriteMatch(UrlContext url, out RedirectMatch match)
{
// NOTE: Normally this would use regular expression matches, cached database
[Code].....
However, I need to reference Url and ProductID in the function and I don't know how to pass them as parameters or get their values from the original function.
View 4 Replies
May 2, 2012
I'm trying to establish a connection to my SqlDatabase while getting the connection string from a function. This will eventually lead to dealing with the appconfig file, but for now I'm just getting the basics established.
Imports System.Data.SqlClient
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[code]....
View 13 Replies
Nov 7, 2011
I'm a beginner when it comes to Visual Basic coding and I need some help with an error I'm getting. I'm trying to pass a structure array to a function to figure out a student's grade. I'm getting the error that 'QuizOne' is not a member of System.Array. Here is my code:
[Code]...
View 3 Replies
May 19, 2010
i make a function passing array paramters in VB6 Public Function PolCoefCalc(pT() As Double, pU() As Double, pN As Double, pA() As Double) As Double
Dim return as double
returnStatus = 0
PolCoefCalc = returnStatus
End Function
[Code]...
View 4 Replies
