I am trying to do this but it doesn't work:
VB
Dim str As String = "07" & GetBetween("Stephen 0761234567", "07", vbNewLine)Dim op As String = "lol" TextBox1.Text.Replace(str, op)
GetBetween is just a function to match something between something else. That works fine, the string (str) sets as 0761234567 just like I want but when i try to replace the text it doesn't work.
Sorry if this seems like I haven't searched, however I have. Maybe I'm not understanding something or maybe I just haven't found what I need. Anyway my question is this. How would I find multiple strings in a text file and replace them? So far I've been able to find out how to replace a single string with:
[Code]...
I'll explain the scenario. I have a list containing character list and it's corresponding unicode characters(copied from CharMap and pasted in VB editor).
For example:
Text = Unicode --> Unicode character
---------------------------------------
K = U+004A --> J
[code].....
Using VB.Net I'd like to be able to replace a range of characters in a string in a single line of code.
i.e. something like
Dim charsToReplace as string = "acegi"
Dim stringToBeReplaced as string = "abcdefghijklmnop"
charsToReplace.ToArray().ForEach(Function (c) stringTobeReplaced =
[Code]....
i want to replace :/ and space in my date and time ex. "6/23/2011 11:48:00 am" in my lbldate.text. how can i replace this 3 character
View 8 Repliesmy OCR copy text to a TextBox with at end, acts like enter key. Is it possible to replace it to something or remove it? For example, I want to copy number 1000 to my text box with OCR but I get 1000(its a little different boxes, I couldnt copy exact ones here). And I cant do
TextBox2.Text = TextBox2.Text.Replace("", "")
, because is an "enter key" and what I get looks like that:
My program paste lots of stuff to a text box. Is it possible to replace every character that is not a number or a point to nothing? It may get lots of weird character there so is here way to replace them to οΏ½οΏ½ and keeping numbers?
I know how to TextBox1.Text = TextBox1.Text.Replace("%", "") But its too many simbols to list, Can it be done easier?
I have two textboxes. I type in one of them and the text gets copied in real time into another textbox. There is one catch. I need to replace specific character with something else.
If I enter a quote " in textbox1, it has to be replaced with " in textbox2.
I started with something like the below code, but obviously this does not work (tried different stuff - this is for demonstration only). In the example below 'a' represents " , and 'b' represents "
Private Sub TextBox1_KeyUp(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox1.KeyUp
TextBox2.Text = TextBox1.Text
[Code]....
lswScriptreader =
New System.IO.StreamReader("test.txt", System.Text.Encoding.Default)
lswScriptwriter = File.AppendText("test1.txt")[code]....
Hex(D1) is my column Terminator and need to replace it with ",".
how to replace a string in a datagridview with another string?
e.g I have a column which has texts "Text1","Text2" that repeate many times in the column. How can I search-replace "Text1" with "anothertext1" and "Text2" with "anothertext2"?
I searched in datagridview members but I didn't find how to do it.
I'm reading a text file that has ZPL language for sending strings to a Zebra printer. Each line has one parameter that is replaced with a value. However, the line posted below has multiple parameters that need to be replaced with values.
'''''Line from text file
^FO005,005^A0R,035,025^FD(01)90723236{strLabelNumber}{intCheckDigit}(3201){strNetWeight}(11){strProductionDate}(21){strOrg}{strBoxNumber}^FS
[code]....
I can replace one parameter with one value using string.replace, but how would I continue to process the rest of the string? Would I replace the first parameter then reevaluate the string again to find another parameter until no more parameters are found?
txt1 = help and txt2 = me! txt3 = not here, when i enter the other box i want the okay to drop sign to come up, after drop txt1=me! and txt2 = help.if i drag to txt3 display the can't drop sign.Iv'e tried everything all i can do is replace one way.also,i want the can't drop and can drop simbols to show.so far
Public
Class Form1
Private
Sub tbMouseDown(ByVal
[code]....
How can I specify in my string that I want to replace occurrences of ALL characters and replace them with a specified character? Something like this:
'assuming currentWord is a string that contains any word
_myWord = CurrentWord.Replace("a-z,A-Z", "*")
I have a code snippet that cleans a string of various characters. [Code]. Is there a better way to do it than this?
View 3 RepliesWhile my user is typing text into a textbox i want the characters " to be replaced with ' '. The thing is, when i put ' ' in the replace code, it thinks it is a comment so i cannot run the code without producing an error.Also in my multitext box, everytime i write text and hit ENTER, save and then load it back again, the last line ends with a comma, so:
Line 1
Line 2,
When the text is written to the file i read from, it will show like this:
"Line 1Line 2",
So i need a way of trimming ", when the apostrophe " and the comma , are together. My code already trims "".
In c programming language,
I can do
printf("%d
", value);
But in c#, how can I do it? For example string is "Good %s everybody"
I want to replace %s with the variable. Are there any solution except str.Replace("%s","good morning");
I have an issue, i have a program im working on, that i have been working on and im trying to replace a whole block of text. I do it in one spot in my code and it works great, but in a different part of my code, even though im using the same exact logic and pretty much the same code (other than slight variable changes) it will not work, and i have no idea why, it just like ignores it. I took some screenshots:If you look hard the only difference is the "S12000" (top pic) is changed to "S6000" (bottom pic). The pic shows this part about 3/4 of the way thru it.
View 1 RepliesI am running the following code but it is not replacing it:
Dim stItemName As String = txt1.Text
stItemName.Replace("&", "")
txt2.Text = stItemName
Is it possible to replace string characters using the delimiter and limit of a split function?
For example you have this string "1,1,1,1,1"
I wish to replace sentence number 2 into the string "2" between the "," character so that will be limit number 1.
So the result would be "1,2,1,1,1".
I'm using a recommended character replace regex I got from this forum, however it is not fully working in deleting unspecified characters
Original String:acAc10[]() _~!#$%^'&*()+-[]`"
Actual Result:acAc10()_#$%'&*()+-"
Desired Result:acAc10() _!'-"
[Code].....
I am attempting to make a text editor. I have a folder which contains hundreds of text files. I would like to search through all files simultaneously, for some text then replace the text with other text & save, & overwrite originals. I've got most of the basic structure done, but I've go no idea how to search for text in all files in a folder.
View 13 RepliesI M using small application it has two textbox i m put data in textbox1 and find output in textbox2 i want to do mulipal replace text in textbox2 like
Quote"KB" to "kilobyte"
"MB" to "megabyte"
"GB" to "gigabyte"
"TB" to "terabyte"
For this i m using this Code
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
TextBox2.Text = TextBox1.Text
Dim i As Integer = 0
[code]....
I want to replace the text of my buttons using a loop and I dont know if it is even possible. So here is how it works I have multiple buttons with blank values in them. I also have a database that has a table in it. Now when my form loads i want the buttons to have a new value in them which will come from my table. And I want to do this process using a loop like the code below
[Code]...
I am working on a program and for one of my features, I need to replace all spaces in a program with - (dashes.) Is there a way in which I can do this?
Example:
Start String = "The rain in Spain falls mainly in the plain."
End String = "The-rain-in-Spain-falls-mainly-in-the-plain."
[code].....
Is there a simple way to remove reserved characters from a string without looping through it and testing each character? I want to remove <>:/?|? from strings that are used for folder and file names.
View 3 RepliesI am trying to open up a text file that contains some text. I have 3 text boxes on my screen. What I need to figure out is how to replace multiple words (1 in each textbox) with text it finds in the txt file.
I can do this by using the single find / replace feature but I'm trying to be able to fill out the 3 textboxes and then click my find / replace button to have my Regex find each predefined word and replace it with what is in the text boxes.
Here is my code to get the find / replace one word at time feature. I've tinkered with this to just add more variables to my Regex but it doesn't seem to work.
[Code]...
I have code that works to place two items in listbox into two textboxes when selected (multiple select extended).
Private Sub lstOutput_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles lstOutput.SelectedIndexChanged
Dim i As Integer = lstOutput.SelectedIndex
[code]....
I need also to be able to modify the data in the textboxes and replace the lines in the listbox. The reverse code doesn't work properly, it only replaces the first selected item. The "lstOutput.Items(i + 1)" appears not to lead to the second selected item.
Dim i As Integer = lstOutput.SelectedIndex
lstOutput.SelectedItem = lstOutput.Items(i + 1)
lstOutput.Items(i) = txtName.Text
lstOutput.Items(i + 1) = txtPhone.Text
I have scoured the web for ways to manipulate the selected index/indices, with no success.
I'm using the Oracle command dbms_output.get_line to retrieve output from a stored procedure. Once my code runs the command, I'm retrieving the results through a buffer string, 32000 bytes long.Inevitably, this string will have Oracle line breaks (chr(10) and chr(13)) in it that I'd like to replace with Environment.NewLine so I can display the output in a standard Winforms textbox.Here is the code I've been using - I don't recall exactly where I got the Oracle command right now, but if I find it, I'll add the link.
Dim cmdGetOutput As New OracleCommand("declare " & _
" l_line varchar2(255); " & _
" l_done number; " & _
[code].....
Here is my code snippet:
Public Function convert(ByVal robert As String)
Try
robert = Replace(robert, "U", "A")
[code].....
earlier with my program question and found out that """" is how you make " become another variable in the function:Robert = Replace(Robert.ToLower, """", "A")So now I am also trying to work with other keys like the semi-colon. I put it in the function like this:Robert = Replace(Robert.ToLower, "char(59)", "B")I also tried to insert ; in place of char(59) with in front of it as an escape key, none of this worked. It still just gives me a ; when I type
View 2 Replies