determine if a tabpage of a tabcontrol is being hovered over.I wanna set a property to true if it is hovered over and if it is I will then highlight it.this is what I have
vb.net
Private _MouseHover As Boolean
Public Property IsMouseHovered() As Boolean
Get
[code]....
this clearly will put it over any tab page I need to make the property specific for each tab page.
In my form I have a TabControl that has 13 TabPages. I have been able to print the Entire form, but I would like to just print everything in various (not all) TabPages. Each of the TabPages have a several PictureBoxes and several Labels.
Where should I start to simply print the TabPage?
I am back with new problem using TabControl in VBNET2008 Window Application I am trying to figure out how to determine logically either TabPage1 or TabPage2 header button is clicked on.
The TabControl has 2 Pages:
TabPage1 Text = Display Orders
TabPage2 Text = Edit Transaction.
I need to know which one is clicked on in order to write the routines.
I get an error when I try to add a tabpage to my tabcontrol.
View 6 RepliesI'm trying to add a tabPage to an existing TabControl named TabControl4 I went all over it with the Debugger and everything is fine, but it won't show the TabPage in the TabControl. That's the code, Notice all the information being added to the TabPage is retrieved from a database so don't pay any attention to it, plus the software is in Hebrew so just ignore the Hebrew Strings.
[Code]...
how to change the tabpage selected of the tabcontrol by using normal buttons (like button1, button2,button3 and so on). I don't want to use the ugly default buttons at the top of the tabcontrol to change it.
View 4 Repliesi hav a tabpage on a form n on its click event i want to call the tabpage of another form (like frmcut.tabcontrl.tabpage1). But i dont know how to do it?
View 4 RepliesIn Vb.Net 2005, how is it possible to make the TabPage.Text to appear when the DrawMode of a TabControl is set to OwnerDrawFixed. I have even tried to set the TabPage.Text in the Form_Load event but of no avail.
View 1 RepliesI have been tasked with showing a tooltip when I hover over certain TabPages within a tab control, I have tried everything I can think of to resolve this little task, but still I am left with no clear answer.
the events that I would normally use, seem only to fire if the mouse is over the actually tabpage, I am more interested in the tabpage under the mouse in the tabcontrol.
How can I make an event for a tabcontrol which has Tabpage1, Tabpage2, Tabpage3, and so on.. For example... There's a label outside the tabcontrol (Label1). If tabpage1 is selected, how can I make the label1's text changed?
View 1 RepliesIn Vb.Net 2005, how is it possible to make the TabPage.Text to appear when the DrawMode of a TabControl is set to OwnerDrawFixed. I have even tried to set the TabPage.Text in the Form_Load event but of no avail.
View 1 Repliesi am using a tabcontrol with close button.i have 4 tabpage and i call each tabpage through menustrip.
MainTab.TabPages.Add(TerminalPage)"for tabpage1"
MainTab.TabPages.Add(Attendance)"for tabpage2"
MainTab.TabPages.Add(Multimedia Projector)"for tabpage3"
MainTab.TabPages.Add(Conversation)"for tabpage4"
i can open and close it without any problem. my problem is that how can i determine if the tabpage is already open? bcoz for example if the tabpage1 is already open, clicking MainTab.TabPages.Add(TerminalPage)"for tabpage1" this will add another tabpage named terminal page.
I tried this:
If TabControl1.SelectedTab = TabPage2
But it didn't work.
In Vb.Net 2005, how is it possible to make the TabPage.Text to appear when the DrawMode of a TabControl is set to OwnerDrawFixed. I have even tried to set the TabPage.Text in the Form_Load event but of no avail.
View 1 RepliesI want to customize the tab control the tabpage headers shoud fill the tabcontrol header. if there are only two tab pages then the header should be divided into two parts and please give me good info about tabcontrol custonmization for better look and work
View 1 RepliesI've recently run into an unexplainable issue regarding a windows form application I am working on. I've managed to isolate the issue to a single line of code whereby a single TabPage is removed from a TabControl, leaving no tabs left in the TabControl's collection. What happens next is a bit mystifying: my application proceeds to enter a state in which the main form's Activate event is fired subsequently followed by its Deactivate event. As a result, no matter where I click on the form, the application will activate for a split-second then immediately deactivate itself, thereby causing me to be unable to interact with any other GUI controls on the form. I thought maybe another thread is trying to interact with the deleted tab object, but the tab is created and destroyed on the same main gui thread. Does anyone have any insight that may point me in at least a new direction? Stepping through the debugger to the point in code where the tab is removed does not cause any exception to get thrown, so at first glance there doesn't appear to be any coding issues going on (although I would not be surprised that is actually the case!).
View 3 RepliesI want to customize the tab control the tabpage headers shoud fill the tabcontrol header. if there are only two tab pages then the header should be divided into two parts
and give me good info about tabcontrol custonmization for better look and work
this is what I want it to do. On the label, I put a little image (a question mark icon). When hovered, a bigger image would appear. But the problem is, some other "labels" is going on top of the bigger image. And also, the bigger image, gets cropped when it reaches the border of "groupbox"
View 2 RepliesI am writing a tabbed webbrower program and i am trying to close the program when all tabs have been closed using ctrl+w. So far i have used the following code but it has errors as tabcount is readonly:If TabControl1.TabCount.Equals(0) then Me.Close() End If
View 15 RepliesI am trying to display an usercontrol(has several panels one on top of the other panel) on tabpage. I am using below code to achieve this.
[Code]...
I am using System.Windows.Forms.TabPage to store an entire TabPage for later use in My.Settings. Here is a brief description of the application.
I have a TabControl that has 3 tabs. One for user input, another tab for equipment settings, and then a final tab for Oven settings. On the user input tab, if the user de-selects the checkbox for Oven, the oven tab is saved to My.Settings and hidden.
I can then run the application without oven control. After running, lets say the user would like to re-run, this time with the oven. They go back to the input tab and re-select the Oven checkbox. However, the Oven tab doesn't re-appear. When stepping through the code, the is nothing stored in My.Settings for the oven tab page. Why not?
Also, I can open the application, and check, then uncheck the oven checkbox and the tab is hidden, then returns. I can do this all day. However, after running the tab will not return.
I currently have a picture box and it has a MouseHover event. When the picture box is hovered the picture will change images. But when it is not being hovered upon I need the picture to switch back to the original image. Is there anyway to do this.
Currently I have:
Private
Sub picOpen_MouseHover(ByVal sender As Object, ByVal e As System.EventArgs) Handles picOpen.MouseHover
picOpen.BackColor = Color.White
End Sub
I'm trying to change the background color of a node that is being hovered over while the user is dragging items from a list box.I've gotten both functions to work separately, but while the user is dragging, the NodeMouseHover event does not fire. Is there a way to do both?
vb Private Sub trvNavigation_DragEnter(ByVal sender As Object, ByVal e As System.Windows.Forms.DragEventArgs) Handles trvNavigation.DragEnter
If Me.CanMove(e) Then
e.Effect = DragDropEffects.Copy
[Code]...
Note: CanMove() is a function I made that verifies the dragged data. Nothing else. And I will change "Color.Blue" to a system color later.
I have a slight issue on my program. I have everything in working order except for displaying "You Win!" or "Try Again!" after all text boxes have been hovered. Currently it displays the answer on the first hover because all boxes are already populated with random numbers from an Array and it knows the answer. I want the label to display at the end of the game on the last hover event.
Public Class Form1
'Declare variables we want to use on more than one sub or function.
Private randObj As New Random(1)
Private LottoArray(5) As Integer
[code]....
I'd like to place a little clickable button on the tab of a TabPage
View 3 RepliesMuch like you'd do a formname.show. I'd like to make a tabpage come to view. I've tried the tabpage#.show and it didnt bring it to focus.
View 2 RepliesI want to make a new RichTextBox contorl when a new tab page is created. I also need that control to be the child of the tab page. I created a class for the tab control. And a class for the RichTextBox control. I dont know how to start this. I have made a class for the RTB because I figured I could override the sub new procedure but you can't so i just declared it as public and set what I needed it to do. But it doesn't work.
View 1 RepliesI want to make a new RichTextBox contorl when a new tab page is created. I also need that control to be the child of the tab page.
I created a class for the tab control. And a class for the RichTextBox control.
I dont know how to start this. I have made a class for the RTB because I figured I could override the sub new procedure but you can't so i just declared it as public and set what I needed it to do. But it doesn't work.
I Try so many times to change TabPage Size and Form Size when I shif from One TabPAge to another, This because every TabPAge consist of defrent volume of control which need to enlarge and reduce the size. But I couldn't make it.
View 2 Replieswhy can't I performCllick using a button which is on other tabpage. I tried those two so far but nothing happens:
[code]
btnAdd.PerformClick()
DirectCast(My.Application.OpenForms("record"), record).btnAdd.PerformClick()
/CODE]
it must be simple I just can't do it because I need to get this done when I am in other tab