I have a resource file named WonderlandManifest, and the filename is WonderlandManifest.exe. I want to extract it to a temp folder and then run it.
But the code I have doesn't extract it to the temp.[code]
how do I extract a Resource file?
View 3 Replieshow can i extract exe from my resource file ? to some where i read many topics but none of them works see picture below
View 3 RepliesWork Program to add the resource file, to extract, to show, correct ... I can not do operations ...
View 2 RepliesI want to extract 2 bitmaps from a file in vista called "winload.exe.mui" hw can i extract it
View 1 RepliesI'm trying to put my resource in the temp path instead of my local path.
here's what I have so far:
Dim TempPath As String
TempPath = System.IO.Path.GetTempPath
Dim ResourceManager As Resources.ResourceManager
[code]....
problem is, nothing happens when I click my button.
How to get the file path of the Temp directory (% temp%)? I use Visual Basic 2010
View 1 RepliesAm trying to copy contents of file temp.fxl to temp.seq. I want them to look exactly them. I don't want to copy the file though. I use the following code
Dim fs As New FileStream("c:\fxlate\output\temp.fxl", FileMode.Open, FileAccess.Read)
Dim s As New StreamReader(fs)
[Code].....
With such simple code, the last line in temp.seq is truncated as attached and the size of the file is smaller than temp.fxl. See attached files. What do I need to do on the above code. Is VB.NET failing to write 1024 characters on one line.
Right now I upload a temp image file, delete the original, and then rename the temp to the original. Is there any way to rename without deleting first? I am doing this in a loop for a webcam program and when I delete the image, it shows a broken image if it is being veiwed right then. I wish I could allow it to overwrite when calling the rename. FYI, I have to upload a temp image first because if I upload the original, it will show as a broken image or partial at timed when being viewed.
View 1 RepliesLet's say i did add some exe file to the project's resources.now if i want to run that file, i have to extract it from the resources as a new file and then i can run it
View 1 RepliesI want to create a patcher/installer type program. I have 3 files that need to be embedded or stored in a file. Two files need to be extracted when user clicks a button and one of those two files need to be run with a parameter when the button is clicked and last file needs to be extracted when program closes down. All 3 files need to be able to be updated in the program.
View 7 RepliesHow would i extract an embedded resource and save it to c:
View 7 RepliesI have a small vb.net app that have a few images in an embedded resource.Is there a way I could extract one of those images to a folder from the same exe that contains the resource?, like clicking a button, selecting a folder to save it and extracting the image there
View 23 RepliesI have a small vb.net app that have a few images in an embedded resource. Is there a way I could extract one of those images to a folder from the same exe that contains the resource?, like clicking a button, selecting a folder to save it and extracting the image there.
View 1 RepliesSo i created resource file New --> new file --> Native Resource Template Then added icons with custom id, like "x", "u_100", .. so i understand, what the files (in my case icons) is.. And i saved as 32-bit resource file (*.res) So i have a question, how can i use these files inside of resource file in my apps? i know how to add icons in to my app.. Me.Icon = New Icon(C:/icon.ico)
View 6 RepliesHow I can run exe file from my resource. I have a program that I put it in my resource so I want to run it with out tying c:/ and d:/. I want my.resource.MYFILE.EXE
View 8 RepliesI have my file imported into the application. And when i try to include it into my application.(EX: My.Resource) It wont work. It wont show up the Data.txt. How would i make it so i can import my file into the source and use the file to
View 1 RepliesI'm trying to output a resource file to a physical file on my hard drive. Here is what I have so far from researching but I think I'm doing it wrong.
Dim ms As New System.IO.MemoryStream(My.Resources.File1) Here is how I would do it in VB6, but I'm trying to catch up with the times and move on to the new stuff.
Dim c() As Byte
Open Sysdir & "mswinsck.ocx" For Binary Access Write As #3
c = LoadResData(103, "Custom")
[Code]....
I am developing a VB.NET 2008 application, consisting of a main EXE application and several resource DLLs.
I need two functions for the DLL:
1) one function to get a list of all files in the resources of the DLL.
2) one function to return 'by name' a resource file as a System.IO.Stream type.
NOTE: The files will not be "Embedded Resource" (this doubles the size of the DLL), so I think cannot use 'GetManifestResourceStream'.
[Code]...
I am developing a VB.NET 2008 application, consisting of a main EXE application and several resource DLLs.I am trouble with two functions for the DLL:
1) one function to get a list of all files in the resources of the DLL.
2) one function to return 'by name' a resource file as a System.IO.Stream type.
NOTE: The files will not be "Embedded Resource" (this doubles the size of the DLL), so I think cannot use 'GetManifestResourceStream'.
I currently use:
Return New System.IO.MemoryStream(My.Resources.MyFileName)
but I want it to be called by name.I am adding the resources using the VS 2008 "Resources" tab, from the My Project screen, I'm not manually editing Resources.resxAs I said before, it works with:
Return New System.IO.MemoryStream(My.Resources.MyFileName)
but I need to get the resources by name, which also works by using
GetMAnifestResourceStream
but this requires to set the resources Build Action to "Embedded Resource", which doubles the size of my DLL file.I currently use "None" as Build Action, but I can use any Build Action that does not increase the file size more than the actual resources size.
I'm trying to write an application that requires information to be saved once the application has been exited. In order to do this I have been experimenting with storing the data in text files. More specifically I've been looking into adding text files as application resources. I am using VB Express 2008 and added the text file resource through the application tab>>Resources>>Add Resource>>Add new text file. I am able to use my.resources.TextFile1 to read the text file but I am unable to write anything to it. I have tried using my.resources.TextFile1.replace and .insert but neither of those are working out. I was thinking there is maybe a read only setting somewhere, but I have not been able to find any information on this issue.
View 5 RepliesI have a resource file that is a dictionary.txt file, which is basically a list of 100,000 odd records. I want the user to be able to add new words to the resource (which will be embedded in the final build).I can find ways of adding records to files e.g.[code]But how to i write new records to an embedded resource file?
View 2 RepliesI have a app that is multi-language.I'm already using the GlobalizationLocalization and one resource file for the strings.In the application i'll have several groups for the users, but i don't know in the beginning how many groups the application will have, this groups will be added to the database.I thought in adding to the resource file generic names, but like i said i don't know how many groups i will have neither the name, so i'm kind of stuck.
View 2 RepliesDoes VB2008 have the same limit on resource files as VB6? I was trying to store a large text file in my VB6 app (almost 3 mb) but all I could access was 32k of the file. I need to be able to compile the 3mb file into my .exe.
View 4 RepliesI'm writing a program that I want to attach another program (.exe) to. I tried adding it as a resource, but I can't seem to get the resource to export out to wherever the program is running.
View 3 RepliesIf I am in Word and I say File Open, it displays files of type All Files. If I have a Compressed Folder in the current location, I can right click on that folder and Extract All. Then if I extracted a filetype that Word can read, I can click on the file I just extracted and opened this is Word. All from saying File Open. I want to replicate this behavior in my .NET code. Maybe I am missing a property when I create my OpenFileDialog, but if I right click on the same file as above, I do not get a context menu that will let me Extract All.
This is my .NET
Dim dlgZipFile As New OpenFileDialog
dlgZipFile.Title = "Please navigate to the location of the input file"
dlgZipFile.InitialDirectory = "C:ProjectsFiles"
dlgZipFile.Filter = "All Files (*.*)|*.*"
dlgZipFile.FileName = ""
If dlgZipFile.ShowDialog <> Windows.Forms.DialogResult.OK Then Return False
I have a xyz.css file which I read using the streamreader.the file has text in the form
.Addfont { ......
.GridLayout {......
a.Master Layout {......
[code].....
i have a project that im working on & out of curiosity i went to the "clickonce" wizard were you publish your application for deployment (setup) after doing that it created a folder for publish & in my solution explorer it created a file project1_TemporaryKey.pfx
what is this .pfx file? after removing it from my application & closing the solution it started giving me errors & i was unable to re-run the application until i restored the file & added it to the solution.
I have a resource file that I include in my shared code library that has all of my re-usable classes in it (all the resources go into their own namespace). Now, what is the best practice regarding resources... should I include them in the same DLL, or should I have a seperate resource DLL and/or are there any benefits from seperating them out into their own file.
View 8 Replies"C:\Trunk_Dec16\bin\x86\Debug\resource.en-US.resources"
"C:\Trunk_Dec16\bin\x86\Debug\resource.zh-CN.resources"
are 2 strings for which the CultureID's 'en-US' &
[code]....