I am working on a remote administration tool. But I have a problem, since the server connects to the client the client needs a tcplistener. But when the client starts too listen the program freezes and I can't do anything. The reason is that the tcplistener runs in a loop which freezes the form. What shall I do too fix the program?
View 1 Replies.NET developing and have a simple question, i've been stuck on this for a while and searched many forums first with no solution so i'm posting myself. In VB for excel i've used Screenupdating=false to disable the screen updating however now i'm creating a visual studio 2010 windows forms application and its not showing up as a property. Here's the code i've tried.
[Code]...
Basically, in my Tcp Library I'm working on, whenever the system is told to "Stop", the OnClientConnected() Routine fires off, which is only raised under two circumstances: When a Client connects (obviously) When the server is told to shutdown
Now, the first one is handled just fine. But the second one is not. In fact, it has caused me a great deal of headache because it keeps throwing exceptions on this line in particular:
Dim _tcpClient As System.Net.Sockets.TcpClient = _tcpListener.EndAcceptTcpClient(IR)
When I hover over while debugging, I can see a few members that reveal exception data I could utilize; but unfortunately those members are private and I don't want to utilize reflection unless I have to since it could slow down performance where there may not be a real reason to.
I have thought of writing in a Boolean check to see if the server received a shutdown signal and that would indicate that it's time to not accept anything, but I want to avoid that if possible.
Is there any way to see if the TcpListener is no longer accepting connections and has had .Stop() called without reverting to catching the ObjectDisposedException that is raised? (because the Socket that is "accepted" is actually a disposed one)
i made a simple tcp listener server.Now I can use my client to connect,it connets, everything is good. The
problem is when I open the first client, then I open another one, it doesn't connect. It accepts only 1.Any way I can accept multi connections?
[Code]...
will a VB 2010 (Windows Forms Project) run on the Windows 8 platform?
View 3 RepliesI have a windows forms app (32 bit) written in VB2010 which occassionally hangs in windows when minimised to the task bar You click on the icon on the taskbar and it will not come back up on the screen
No other modal forms are open in the application when the hang occurs Other programs respond OK
I ran Process Explorer against when it was Hung but do not know how to interpret the stack page, or even if it is helpful STack page with my application selected and Threads tab selected with CSwitch Delta column sorted descending. Then double clicking the top entry (my application .exe)
Note: This is running on an x64 machine, but also hangs on x32 machines
[Code]...
I couldt find an event that I can use to determinate which tab page is selected. I couldt find SelectIndexChanged
View 3 RepliesI have a System.Windows.Forms.Timer named "DialogBoxTimer" set up on a form. When the form loads, it has a command to stop the timer. I have a routine [SPDataRecd(...)] that handles SerialPort1.DataReceived from a serial port (modem). When it is activated by a modem event, I want it to start the timer [DialogBoxTimer.Start()], but it doesn't work.If the timer is running, SPDataRecd can *stop* the timer [DialogBoxTimer.Stop()], but it can't start a stopped timer.
View 6 RepliesI've got a dictionary<string,string> that I need to access and use on several windows forms. In asp.net, I could store it in Session and use it from any aspx page. How would I do this in forms?
[Code]...
I'm using VB 2010 and simply want to have a button on the form that says Minimize.I want the form to minimize to the task bar or the notification section .I've looked at other ideas, but the code is for prior versions of VB (2003 and 2005) and some for C #Could you please email me some sample code to handle this?
View 4 Repliesi've been stuck on this for a while and searched many forums first with no solution so i'm posting myself. In VB for excel i've used Screenupdating= false to disable the screen updating however now i'm creating a visual studio 2010 windows forms application and its not showing up as a property. [code] And i get the error 'screenupdating is not a member of 'system.windows.forms.application'.
View 2 RepliesI am a novice in programming and wrote several simple Windows Forms applications. I need to play mp3 file in Windows 7 x64 application.
Could you, please, explain in simple words, how to call MediaElement.Play() method from Windows Forms?
In my VS2010 VB project I have a lot of external references to DLLs, to the point that organization has become a major headache and I'm wondering if I am going about it the wrong way. My assembly references include common redistributables (SQL Server Compact 3.5 SP1, ReportViewer 2010 SP1, DataVisualization, as well as some useful 3rd party dlls from CodeProject and CodePlex.
Currently, I am copying each DLL into a 1st level folder (/dll_lib) under my named project folder (under the solution folder), and adding the reference from that path. However, I see that Visual Studio copies the DLLs to various other locations (/bin/debug or /bin/release) in my project when I build the project or solution, and some of the 3rd party DLLs come with instructions to copy them manually to /bin.
What is the "best practice" for where to put the DLLs? Can I just put all of them under /bin and let the build event copy to /bin/debug or /bin/release as required? Should I try to force a single reference path for the dlls in the project output?
I am trying to use values from form1 in my project, in form2, but Im not sure how to do it. I've tried
txtboxTotal = (Form1.vsbLength * Form1.vsbWidth) * Pattern
But I get: operator '*' is not defined for types 'System.Windows.Forms.VscrollBar' and 'Systems.Windows.Forms.VscrollBar.'
I have the code which checks if there is a selected tab
Private Function GetBrowser() As WebBrowser
If TabControl1.SelectedTab IsNot Nothing Then
For Each c As Control In TabControl1.SelectedTab.Controls
If TypeOf (c) Is WebBrowser Then
Return c
[Code]...
I have a panel with some controls in it (several textboxes, a slider, 2 buttons, and a small groupbox).. When I click a button, I want all of the textboxes within the panel to be readonly... So I have this code: [code] When I run it though, I get the following error:Unable to cast object of type 'System.Windows.Forms.Button' to type 'System.Windows.Forms.TextBox'.If I remove a button, it moves on to give me the same error but for a label..
View 4 RepliesI'm trying to code a program but this error repeatedly shows up and I can't for the life of me figure it out EValue of type 'String' cannot be converted to 'System.Windows.Forms.TextBox'. It appears in relation to this code
[Code]...
I have a basic three form application. It doesn't seem to close after navigating through forms. If I were to open the application, and the main form is displayed. If I press the X button, the application closes fine(Goes from processes) If I were to open the application, and then navigate from the main form to another form using me.hide & form1.show, and press the red X on Form1, the application again, closes fine.
[Code]...
I have the requirement to create an application that has multiple front ends developed using Windows Forms, WPF, ASP and Compact Framework Mobile Forms.I would like to be able to create a series of obejct representing the business logic and have this logic accessible from the various front ends available. My first thought was to use remoting as I'd like to be able to pass the business objects back and forth between client and server but the compact framework doesn't support remoting and also transferring a full framework business object to a compact framework business object doesn't seem possible.My next thought was to use web services but again the passing of business objects seems to be very hard to accomplish. Without doing this I would have to create individual web methods for each business operation.
Finally my next option is to use sockets and write the whole client/server logic within some classes and expose them to the UI/Business layer. My only problem with this is it is not scaleable should the number of clients increase dramatically whereas using remoting or web services I can host the solution via ASP.Net.Does anybody have an ideas on the best way forward for this or even have any input on how they would write an application that required a windows form, wpf, asp website and mobile device GUI all of which want to use the same business logic?
I would like to know if its possible to start up a second windows forms inside the parent form. Ex: A button is pressed and a new form is showed. I would like to keep that new form inside the parent form, and have it not be able to go outside the parent form.
View 2 RepliesI am writing a program for my A-level coursework But for some reason I got this build error this has never occurred to me before, I have no idea why I can't use string for the name of my form.
View 8 Repliesa program and i need to have a button put a file into a folder, i know how the button works i already have it doing some other stuff. i just don't know the code to copy and past it to a folder.
View 1 RepliesWhen I add a new, empty form to my VB.NET VS9 project, the linenherits System.Windows.Forms.Formis missing.What am I doing wrong here?I thought it would be added automatically.I experienced that some thing get weird if this line is not there (Form_Load is not firing, I think).
View 3 RepliesI've successfully saved video files into SQL server as varbinary. Now, my problem is, how can I play those videos in Windows Media Player (embedded in my Windows Forms).
View 1 RepliesI'm porting code that I wrote for use in a Windows Forms application to a Windows Service, but for some reason, the code that worked in the Windows Forms application is now throwing errors in the Service
View 7 RepliesI am making a System Tray Application when i minimize my form its hide itself in the tray but whenever i click on the tray icon my form shows now when my form shows up i would like to disable my Background desktop same as CardSpace when its shows up.
View 1 RepliesI have a problem with scroll in a treeview in a Windows forms application (Framework version 3.5).
The strange thing about the problem is that on Windows XP, Windows 7 and Windows 2008 the scroll works as excepted, but in Windows Server 2003 SP2 the scrolling doesn't work. Enable/disable Visual Styles doesn't seem to make a difference on Server 2003.
Steps to reproduce the error:
1. Add a treeview to a form and add x nr of root items (and 1 sub item to each item).
2. Expand a number of nodes. The non-standard thing here is that we are changing the node integral height because we display a usercontrol with the treenode (See example of the code below).
3. When you scroll afterwards, you cannot scroll to the bottom node. The scrollbar is all the way down, but we are not seeing the last node.
Public Shared Sub SetNModeHeight(ByVal Node As TreeNode, ByVal IntegralHeight As Integer)
'Create instance of tvitemex structure.
[Code]....
I was playing a game recently and saw that they could use args in the shortcut, and I decided to try to impliment this into my application...so far, I got: (runs this sub on load)
Sub startup_args()
If Environment.GetCommandLineArgs.Contains("+game") Then
Dim path As Array = Environment.GetCommandLineArgs
[code]....
just to see what it returns, but the application crashes. I also tried path.tostring(), but that didn't work. When I did:
If Evnironment.GetCommandLineArgs.Contains("+game") Then
Dim path as string = Environment.GetCommandLineArgs.tostring
MsgBox(path)
[code]....
but that returned the value "SString.Array[]"...
What is the vb.net equivalent to accomplishing this?
static void Main()
{
frmCalcView view = new frmCalcView();
[code].....
My question is, am I able to share a business logic layer seemlessly between the two presentation layers or is there anything I need to watch out for. I'd really like to not have any duplication of business logic, so any advice would be more than welcome.
View 3 Replies