I have two comboxes inside a panel and have the following code which generates an error "Object reference not set to an instance of an object." on the line marked with *****
Private Sub cboJob_MouseHover(ByVal sender As System.Object, ByVal e As System.EventArgs) _
Handles cboJob1.MouseHover, cboJob2.MouseLeave
[Code].....
how to raise the mouse leave and mouse hover events for VB when i place my mouse cursor over the button.
When my mouse cursor is over the buttons, it will raise the mouse hover event and open the form, then when the mouse leaves the button, it will close the form upon raising the mouse leave event.
but currently, When i excute this two events, the for will open and close very,very fast. so fast that it is like spamming the VB.
So i am wondering how to change the code that i have to excecute the event one time every time the mouse is over the button which is created at run time.
the codes to execute these two events are:
Private Sub Button_MouseLeave(ByVal sender As System.Object, ByVal e As System.EventArgs)
For Each ctl As Control In PictureBox1.Controls
[Code].....
[URL] I have tried heslacher's method which is Hi clzanas, you problems had been the result of calling a for each loop inside the events. If you only want for the button you hoover / leave to call the ShowDetails.Open/close, then you can take the code below:
Private Sub Button_MouseLeave(ByVal sender As System.Object, ByVal e As System.EventArgs)
If TypeOf sender Is Button Then
ShowDetails.Close()
[code]....
But i got the same results as my previous code, resulting in the form opening and closing so fast that it is like spamming the window.
Can I select all buttons in my form on mouse hover event in few lines only?I want to add hover sound effect on all buttons when hovered.
View 2 RepliesI have two questions in my mind!
1) What's the difference in mouse hover and mouse enter event in regard of vb.net?
2) Is embedding a resource in application more efficient or linking it on compile time?
In my VB.Net forms application, I have a function:
Private Sub pnlMain_MouseLeave(sender As Object, e As System.EventArgs) Handles pnlMain.MouseLeave
...
[code].....
im having a label displaying a text, if i click on it it will act like a link label but without that fancy formating, what i want to do is whenever the user has the mouse arrow over the label, the label changes color, is such thing possible?I want that for only 4 specific labels, nothing else is important, so is there a simple way to achieve that? like something similar to:
View 5 RepliesI'm trying to create balloon tips (NOT SYSTEM TRAY) to pop up when mouse hovering over a button.
Code:
Private Sub H_MouseHover(ByVal sender As Object, ByVal e As System.EventArgs) Handles H.MouseHover
End Sub
I have a DGV that has a hidden column with some text in it. I would like to be able to mouse over any particular row and display the text from that column's field in a tooltip. I thought maybe I could do it in the DGV's MouseHover event, but I did not know how to detect which row the mouse was over. Once I do this, I did not see a .Text property for the tooltip, so how do I set the tooltip's content to be the text from the column field?
View 1 RepliesI just learned from 4x2y how to click a window to get its title, i go on modifying the code to see if hover mouse could get the title.[code]...
View 2 RepliesI have a program trying to use mousehover to pause the autoscroll. It is a widows form called:
lstOutput System.Windows.Forms.1 Below is how it is in my code.
Public Sub lstOutput_MouseHover(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles lstOutput.MouseHover
'Public EventMouseHover As EventHandler
lblPauseScroll.Text = "Output Paused" 'display output paused
'Highlight the DataGridView
Me.lstOutput.BackColor = Color.LightGray
[Code] .....
For some reason I have to click on the form to get it to pause the first time and then after that it does pause when I place the mouse over the form. It is that first time that it won't pause. The Public Subs I hand typed the codes in, is there some way that I should have added the mousehover to the form itself or are there other reasons that it won't work the first time?
I would like to add a hover text when i have my mouse in fronnt of the image , not from the properties because i want to add some code on it .. it could be like 150x40 or more or less in size .. i would like to make the hover label in code and not visually because i want to add hovers in many pictures.
View 17 RepliesI create a dynamic menustrip based on DB. so on the clickeditem event of menustrip I got on the index of itemclicked so when I move the mouse from the item dropped to another in the menustrip without click on it the item dropped down,that it truly but when I click on item from toolstrip it not open to me the form. So I want use another event on menustrip the mouseHover but how i can get the itemselected?.
View 1 RepliesI have a webbrowser control (in fact, a control inheriting from webbrowser), and added a tooltip control to the main form. Then, I filled the webbrowser tooltip text.But the tooltip never shows. (because the web browsers manage mouse hover with html?)I examined all the events exposed on the webbrowser control, and there is not one about mouse hover.so, the question is: How do I show the tooltip? Should investigate HTML, or there is a .NET control way?
View 2 RepliesHow do I make a Tooltip appear when the mouse is hovering over a Picture Box, that says:
<Combat Training>
When you use an attacking skill you are healed 1% of the damage done.
I am using buttons on my vb.net forms. I want a way in which if I drag my mouse onto a particular button it would increase its size and if I click onto it, it can respond to the codes. May be like I want it too look like those Macintosh laptop icons, whereby if u put my mouse on it, it increases its size.
View 5 RepliesI've found an example of what I'm trying to do. The form will have 2 picture boxes. The first will be the original image. The second will have the zoomed image. Once I move my mouse over the first image, it must display a zoomed image in picturebox 2. I've attached the code that I found (written in C#) of what I'm trying to do. I've converted the code for me to VB. I want my first picturebox to be smaller than my second one. And the attached example shows that the first picturebox is bigger than the second one. I've never tried something like this, or drawing images etc. Just resize the 1st picturebox to be smaller that the second one, move with your mouse over the first one, and will see what I mean. I don't want to click on the image to have it zoomed or use the mouse wheel. Just want to hover over the image and display the zoomed version..
View 2 RepliesI'm doing a program that, when passing the mouse over the buttons, should appear a message with the information button, what it does, etc..
I tried to create the event mouse hover but do not know what to put on this =S
is it possible to hide tab control while it is not in use and when it was hover by the mouse it will appear?
View 3 Replieswant my application to trigger audio files when the user clicks a word/sentence in a label, and show a tooltip on mouse hover. I use VB. I tried using TTS (SAPI 3.5), but can not know which language the user's operating system will have. Also, I was advise to use pre-recorded sound wav or mp3. I created the audio files, but am not able to link/connect/call.
View 1 RepliesI have a picture box in a visual basic 2008 express edition windows form and i want the picture to have an outline colour on mouse over
View 2 RepliesI'm creating an app where I don't want to allow the cursor to leave the form, even when the mouse moves.Would it be something to type into pongMain_MouseLeave ? Something like Cursor.Stop () is all I
View 2 Repliesi have a datagridview with records, when i select a row in datagrid i need to display the values in a textbox. please help me with sample code
View 3 RepliesThis control takes in an array and plots a bar chart type 'count' along the Y axis for a corresponding X location. A user has requested to be able to mouse hover over any location on the graph and have it display the X and Y coordinates.
Option Strict On
Option Explicit On
Imports System.Windows.Forms
[Code]....
I have a menu strip in a form. What I want to do is when I hover my mouse over the menu it should drop down and show the menu without clicking. I am trying to call the click event of menustrip in mouse hover event of menu, but to no avail.
View 1 RepliesI am starting to develop a card game client for a CCG a friend of mine and I are creating.
I have 2 forms Client.vb and Hand.vb linked with a module.vb
In essence when the app starts up I see the client. I can then click the "Hand" button and the Hand Window is shown as well.
What my goal is is to have it so that when i hover over the card (picturebox) in my hand form that it displays a larger image of that card in the preview box (Another picture box) In Client.vb
I have everything working except when i actually mouse over the image in the hand form it creates an error:
Error:A first chance exception of type 'System.NullReferenceException' occurred in CCG 2.0.exe
The code in the mouse hover event:
Code:
F1.PictureBox2.Image = F2.PictureBox1.Image
Im Almost certain im going about this the wrong way but I cant seem to figure out any other way...
PS.I have attached an image to demonstrate what Im trying to do...
Currently Im doing research on something that are related to graphical password.Can I know is that possible ASP.net(vb) can do such things.when mouse hover over a image, that image id will automatically save in database?Lets say that there are multiples images display in GridView. Only 2 images is the answer. So when user use mouse hover on those images, those images id that mouse hover will saved in database. Then, system will check 2 images id is in the list that mouse hover just now or not.
View 5 RepliesI want to have a counter that measures when a mouse enters/leaves a form. To that extent I used the .mouseenter/.mouseleave commands. This works to an extent. The problem is that moving the mouse over any controls inside a form count as existing it- I don't want this. Is there a way to define the controls as a part of the form? Meaning- if the mouse was over one of my labels- it would count as being within the form. A less elegant way to measure form access could be to use the form positioning, and define capture any mouse movement within it.
View 1 RepliesI need help making a panel side out when mouse_hover and in when mouse leave.
I have a a button on there. And when i go to click the button the panel goes back to, width 3.
I have a form that consists of only a TableLayoutPanel (which fills the entire form) containing a vertical stack of buttons. The resulting app is used in conjunction with another app. What I would like is to have the vb app do something when the mouse enters the form. Unfortunately, all mouse enter/leave events are trapped by the panel or the buttons.
As a quick test I created a form with a tablelayoutpanel (docked to fill the form) containing one button. I added the following code:
Private Sub Form1_MouseEnter(sender As System.Object, e As System.EventArgs) Handles
[code].....
