I am reading from a textfile. How can I skip a line if it's empty?
Or is it possible to delete at the beginning of ReadAllLines to remove this empy lines.
An empty line would be following:
text1
text2
"empty line"
text3
[Code]....
I am importing a txt file containing 4 columns of numbers and storing the values into an array, however occasionly there is a line of text that reqires skipping at the start of the text file. I will probably use a textbox or checkbox to say how many/if any lines sohuld be skipped.
[code]....
I want to put a function that reads a text file and put it in textbox1. I used this code to read the last line
Textbox1.text = Io.file.readalllines("C:c.txt").last
but I want it to read the third line.
I have an output file that is putting the information in like this:
R
16
D
18
I
20
I need it to where the code is reading every other line. When I run the program it thinks that it is done once it hits a number. Here is my current code:
[code]...
I'm currently use visual basic 2008. The problem is I have try this code but,it produce no output. There is no problem with the code I guess. Here is my code
Dim i As Integer = 0
Dim line As String
'Dim reader As StreamReader = New StreamReader("C:\drill.txt")
[Code]....
I am trying to read a specific line from a text file and for some reason when I set my variable loopCounter = 1 To 5 it jumps all the way down to the word "Marty" in my text file but if I just change loopCounter = 0 To 5 it jumps to where it should be which is the letter "M" right after "25". I'm trying to get it to read "25". as this is an assignment for a VB class I'm taking. My text file is at the bottom.
Do While readFile.Peek > -1
For loopCounter = 1 To 5
readFile.ReadLine()
[Code].....
This is my code:
Dim lngLines As String
Dim sr As New StreamReader(opdFileAudio.FileName)
While Not sr.EndOfStream
lngLines = sr.ReadLine
If lngLines.Contains("x") Then
lngLines = sr.ReadLine
[Code] .....
At the moment I want to read all lines in text file to a list box but I don't add strings x, and string y to listbox, and looping in.
lngLines.Contains("y")
I'm writing a program where there are text boxes and the user can enter info and append them to a text file as well as read from the text file and view the various entries in it. The problems I'm running into are that I have a button that opens an open file dialog box allowing you to select the file, and I want to get it to open the first entry of that file in the correct text boxes. the code so far looks like this
code:
I used to have this bit of code in there but there was a conflict with the .txt file being used more than once at the same time while it was in there.
code:
Im also having trouble writing to the file and I'm not sure why. I have an "Append" button that has this code in it
code:
and it comes up with the issue "object reference not set to to an object instance".
reading a text file into an array after a certain line in the text file, at the moment i am trying to do it using the method below: but i am having trouble thinking about how i can copy everyother line and also how i can count through the array the i = 0 and i = i + 1 are there while "i".
In a line what i would like to do:I need to copy everyother line for a known amount of lines that appears after the line " I FT I KT I " in a text file, but i do not know the position of this first line in the file.
Dim lines() As String = File.ReadAllLines(sessionsPath$ & "vmcg.afm")
For Each inline As String In lines
If inline.Contains(" I FT I KT I ") Then
[code]....
Does anyone know how to read individual lines off of a text file?
If the textfile looks like this:
Text1
Text2
Text3
Text4
You could make it so on timer1 it sends text1, then on the next tick text2, and so on?
I am working on an app now, and I need it to read text from a .txt file, but there's more. Here's what I want it to do:
Dim text as string
Find "file.txt"
text = line1 in txt file
Do something
text = line2 in txt file
Do something
text = line3 in txt file
Do something
And so on, until there are no more lines to read. I have searched, but all that I have found requires you to preprogram the amount of lines in the .txt file. I want to be able to add lines later without having to go into the code and add more.
I am new to ASP.Net and am trying to set up some content pages to work with my master page.I currently have the following text hardcoded into an asp:contentplaceholder and it works just fine. I want to read lines in from a text file to produce those headlines and retain the current formatting. I tried using the tag i need each line as a separate tag. Below is the code in the content place holder. Id like to have this done in the Page_Load or the pre Init.[code]
View 2 RepliesHere's what i've got so far, i've written all of the data that i'm going to put into my config file, however i'm having trouble reading the specific string values that I need from that ini file. The parts of the ini lines I want to get are the values in between the I've tried using streamreader a couple things but i'm having trouble figuring that out. I need to parse each line of the ini file to get that value in between the single quotations, so that I can set the value for my richtextbox background and text color as well as a few other things that i've set up in my notepad including tab spacing and so on. lots of these different values need to be converted from a string value to integers, and boolean values as well. (4 of them, the rest of them don't have to be changed because they are already string values when my application reads them to determine it's application load settings.
EDIT: I just noticed in the preview that this is from the version of the app where I had streamwriter write "______ value=" & Something to a file. lol some of the (')s are still in this version, so please excuse that little part. I had them in, but took them out so that I could trim data to get a value easier, but I want to use (')s hopefully when all is said and done.For example, just to restate what I want - in the ini file it will read [setting name] value='VALUE'I want to be able to "get" the string value of "VALUE" within the ini file between the 2 single quotations '
I'm trying to create a program that stores a users stats for their character (for something like an RPG). I know how to write more than one line in a text file, but I want to learn how to read and write text on specific lines of my file. I know that you can just read each new line individually in order using a StreamReader, such as
username.text = readLine.ReadLine()
userage.text = readline.ReadLine()
[Code]....
This is good for just displaying the stats and changing them from a constant interface, but I'm afraid that eventually I'll need to read/write specific lines, like reading the fourth line which might specify magic level, or writing a new money amount.
I am in the process (slow process) if learning vb.net by trying to create a simple application that will read and write (save) chosen information to a text file. The application has text boxes (name, email address, etc) and I want to read information from certain lines in the text and place in the given text box.[code]When I start debugging mode it does not display the text until I click onto the text box and it's displaying the first line of text in the file. How do I skip the first line of text and have it display the second line (or the 6th, 24, or whatever line I need to be displayed)?Then I can start working on learning to use streamwriter
View 6 RepliesI'm getting some problems to read a text file with this configuration:
[Code]....
I want to put all 3 lines in a data grid view.
I have a windows form with a textbox and a button, what I am trying to do is enter a number in the textbox and when clicked on the button to cut and paste the data in to a new text file (from number 0 to the number I entered).ie, textfile 1 has 100 lines of data, I enter 25 and press OK I would like to take the first 25 lines and save them into a new text file and save the remaining lines in textfile 1 so it should be like textfile1 75 lines and textfile2 25 lines.The closest I've come to this is the following but this only deletes the one line..[code]
View 3 RepliesI want to create a little program with textboxes in it, that writes the contents of these textboxes to a file. It also needs to write some predefined lines to the files, even on the same line as where the contents of the textbox is.
Heres an example:
The file should look like this when you open it in notepad:
^1::
Send t Text from TextBox {Enter}
First I think I would need to do this:
Dim ioFile As New StreamWriter("scripting.ahk")
ioFile.WriteLine("^1::")
If I do the above it works.. But how can I write another line where the "Send t" and "{Enter}" gets written automaticly before and after the contents from the Textbox?
I have a text file with user names in them on separate lines. I want to check to see if any of the lines doesn't match the exact text im checking for. It doesn't matter what line the text is on, as long as it is in there. If it's not, alert me. Previously i tried .contains() but obviously if a user name is "hello" and another's is "helloworld" it will match both of them.So basically i need to read all the lines in the txt file and if none of them lines contains the specific text im looking for then alert me. [code]
View 5 RepliesI have the following code to read a csv file and copy each line to another file as long as it does not contain certain strings, it seems to work a little but it leaves some lines in it shouldn't, and it's also taking lines out it shouldn't as if I keep running it again on each output file it eventually takes everything out!
Private Sub Strip_File()
Microsoft.VisualBasic.FileOpen(1, tFile.Text, OpenMode.Input, OpenAccess.Read)
Microsoft.VisualBasic.FileOpen(2, "C:AcmeIPPMaster.csv", OpenMode.Append, OpenAccess.ReadWrite)
[Code]....
My code so far:
If newpound.Text.Length = 0 Then Else
Dim newpound1 As Integer
Static savedpound1 As Integer
savedpound.Text = newpound.Text
newpound1 = newpound1
savedpound1 = savedpound1
newpound.Clear()
End If
What can I put between Then and Else to ignore Dim newpound>newpound.clear?
If the text box is empty and it moves on to the next one.
I have a table with several columns that allow NULLs. How would I go about writing a SQL Query that will allow me to skip that column in an update if the value is "empty". Should I use a boolean flag letting the query know to update that value? I do something similar in a SELECT like this SELECT * FROM table WHERE (@boolFlag = 1 OR col1 = @col1Val)But trying to do that for an update has proven to be an exercise in futility. Ideally I'd be able to say skip this value if true, otherwise update over my 20ish columns. Right now I can't pass in DBNull.Value, so instead I'm being forced to insert "" which is converted into whitespace (for instance, my nvarchar(50) has 50 spaces).I'm using a SQL Server DB/Table and a DataSet in VB.NET, constructing my queries in VS2k8 if that matters.
View 1 RepliesI'm new here and I'm trying to make a little program with Visual Basic (2010 Express Edition).The purpose of this program is:
1) Load the text file lines and split them into a constant and a value
2) Edit the text file lines values
The content of the text file is like this:
[Code]...
This basically split every lines in two parts: the constant ("Name", "Surname", "Age", "Hair") and the values ("Mario", "Rossi", "50", "Black").Now about the second point, I've added a Button1 which should take the Textbox1/2.Text and the Combobox1 selected item and replace the values(aka separator(1)) in the text file. The problem is I don't have any idea at the moment how to do it. What method should I use?
As you will see from the code below I need to be able to tell before the array runs how many members of the array there are or else the program will crash. How can I redim the array depending on how many lines are in the text file (RECORDS.txt)
Imports System.IO
Public Class Form1
Structure Nation
Dim name As String
Dim continent As String
[Code] .....
As you will see from the code below I need to be able to tell before the arrayruns how many members of the array there are or else the program will crash. How can I redim the array depending on how many lines are in the text file (RECORDS.txt
Imports System.IO
Public Class Form1
Structure Nation
[code]......
I know this is a dumb question but im doing ok at programming considering im not in college yet lol but neways[code]...
View 2 RepliesHow to tell the program that if the field is empty to skip it and go to the next step. I have tried IsEmpty (but it tells me the variable IsEmpty was not declared), I have tried to use different If statements but in most cases I get the message
"Conversion from type 'DBNull' to type 'String' is not valid."
I tried using an integer variable and setting it to
'Test = CStr(dt.Rows(I)("socSecNumber")).Length'.
It works for the first step (which makes sense b/c socSecNumber is never empty), but when I set the 2nd and 3rd ones
(TestFName = CStr(dt.Rows(I)("firstName")).Length TestLName = CStr(dt.Rows(I)("lastName")).Length If TestFName > 0 And TestLName > 0 Then...)
Then I am back to getting the message
'Conversion from type 'DBNull' to type 'String' is not valid'.
I do not know anything about recordset and when I did try to use it it displayed the message something like 'get and set are no longer allowed'.
The entire function is below:
Private Sub BtnCreateLetter_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnCreateLetter.Click
Dim SSN As String = TxtBxSSN.Text
Dim dt As New DataTable()
[Code] .....
Is it possible to include something in the SELECT from table? Such as:
"SELECT * FROM" & Students & "WHERE" * NOT DBNull
or
I do not know if it is possible to use variables in the SELECT from table code but if it is I thought perhaps could make a variable named FieldContents and pass it to a function that would do something like:
"SELECT * FROM" & Students & "WHERE" * FieldContents LIKE '[A-Z]'
I have a list of files to read and have to append them all to one unique file. the problem is that when i open the first file to read. I read the first line and discard it. when i read the second line, its empty, but it is not in the original file. what im doing wrong? [Code]
View 13 RepliesI have a text document with the content:
[Code]....
Now, I want to put the "1.hi" in a TextBox1 and "2. all" TextBox2 and the "3.lol" IN TextBox3 and finally the "4.blabla" in the TextBox4 Just split the document into text boxes.
I have a textbox that reads like so:
Line 1
Line 2
Line 3
[code]....
How can I use VB to loop through the textbox, deleting Lines 1, 2, and 3, skipping the fourth, and repeat? Or, rather, record every fourth line into a new textarea?
