I've been working on an app for quite awhile and now am at the point where I have to incorporate an Access DB. Tried many things/variations of what I've found...but now am stuck. So here goes:
I have a Form with this
Public Class Form1
Dim objConnection As New OleDbConnection _
("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=|DataDirectory|Test.mdb")
This is the code for my 'validation' form, which reads stored numbers in an access database and compares them against generated lottery numbers to check for winners. It assigns divisions and prizes to each gameID from the table in the database and is supposed to write this information back to the database. However, I get an error on the very last line of code where I tell the data adapter to update the table in the database with the dataset. The actual error it gives me is "InvalidOperationException was unhandled". Here is my code (ask me questions for any clarification):
I'm using Access 2010 for 2 small databases for a windows forms desktop application.on Form 1, my datagridview updates Paccounts.mdb correctly as follows:
end_OK: Try Me .PaccountsTableAdapter.Update(PaccountsDataSet.Paccounts)
I add data into the newly inserted column with the following
da.SelectCommand = New OleDb.OleDbCommand(sql, con) Dim cb As New OleDb.OleDbCommandBuilder(da) cb.QuotePrefix = "["
[code]....
I added a column to the table manually via opening the access database and all the above approaches work for editing data stored in that column. So I believe it is something to do with the fact that the columns are created at run time.
it's just for a program registration. i would store all of the registration codes in the access database, then export it to XML, then upload it to my web host. I would then somehow connect it to my Visual Basics login form (Which I have already made). If this can't be done, having them register through the form and having all the allowed codes on the internet (So i can easily edit them)!
I'm struggling to get a label or any item updated during an event handler I've tried Form.refresh/update, application.doevent, trowing laptop out of window, etc...
If i check for TextChange event on the label and return the value in a msgbox it is set however nothing is shown on the form I'm calling COM's in a backgroundWorker so the form stays responsive as the COMS take quite a bit of time to handle certain parts and I dont want the form to look as if it hangs.
Private Sub cmsCon_Change(ByVal iState As ACSCN.LoginState) Handles cmsCon.NotifyProgress is where the update occurs in the handler by calling the UpdateStatus() Method
Here is the
Imports System.ComponentModel Public Class Avaya 'declaration
If this has been answered elsewhere can someone point me in the right direction. Instead of having visual studio's update screen i want to have my own screen pop up within my mdiparent form and have abit on the popup where i can display the changes that have been made (i can try and work this out with text files etc.)
i am working on a project that involves checking that a persons login and password are that of held in the database each person has a seperate username and password i seem to have stumbled across an error. here is the code and i will underline the problems
I make simple project for editing ms access vith visual basic 2010. I use dataset to communicate with ms access. When i add record and clik buton save on binding navigator this record is displayed in grid view. When I exit and retur in form all records are displayed, but when I open ms access file added record are not in database. When i open dataset for configure and execute insert query this record is added to ms access file.I understand this, when i use sql connection this form is work correctly. Where is error sparc
I am a bit stuck with coding my save button and combobox.My entire form is ready, database is linked.All fields from DB are linked to their textboxes on the form.But i just ran into a big wall which i cant seem to break down.My save button, which is used to save the content from all the textboxes on the form to the access database refuses to work.The other this is, i want to use a combobox on my form to view the already saved entries in the access database.I think a combobox works for that, but i am not exactly sure how to pull that one off.
I am trying to learn how I can enter data into a Microsoft Visual Basic 2010 TextBox on a form and when I Tab to the next TextBox, the data from the first TextBox is automatically appended to a Microsoft Access 2007 table. For this question, no other controls or objects are necessary.
Syntax error (missing operator) in query expression '''system time'''.this is the error that appears
this is my code:
Dim sqlCmd As String Dim x As Date x = Format(Now(), "General Date")
[code].....
the fields in the tables are all text fields.is there any way to fix this error? perhaps it is in my query but i really cant find a solution.is there an alternative to get what i want my program to do?it is basically entering an ID number and finding the record with the same idnumber and putting the system time on the timein field for that record.
I programmed an app with an Access 2010 database, I installed the app and the database on a computer with office 2007. The app can't open the database. Do I need to copy some extra file on the user's PC?
I am using Access 2010 and VB in VS2010.I have created a DB and have several tables. 1 table in particular called Employers, has the normal AutoNumber Primary key. Everything in Access runs fine. I used Access to develop a basic model application of the full version I am developing in VS.My VB front end contains a dataset linked to the employers table. I have dragged onto my form the "detail" view of this DataSet, not the DataGridView. The usual controls are in place such as the EmployerBindingSource, EmployerTableAdapter, TableAdapterManager and a EmployerBindingSourceBindingNavigator.On my VB form Scrolling through the record set is fine and all works well.My problem is after I click the "Add" record button on the EmployerBindingSourceBindingNavigator. The form fields go blank as expected awaiting user input. However, the field that is bound to the employer_id field (the Employer table's primary key) shows a value of -1.The insert command works no problem, and having looked at the database the table contains the new record with a correctly incremented PK
Where is httpUtility.UrlEncode in 2010?? From what I read in the forum I need to add a ref to System.Web. But I only see references to System.Web.Application.Services and System.Web.Services, which don't resolve the problem.
I'm trying to create an application using VB 2010 and an MS Access 2007 database. I've been googling around but was unable to find something focused on this matter.
In my application, users can establish connections to one or more databases in order to pull in data, thus a read-only connection is sufficient. I use the following connection string syntax when connecting to an Excel 2010 database:
I am working on a program that uses an SQL database which in terms has a dataset .xsd which im using. I need to be able to update my dataset so it can reflect any changes made during run time. I am using the internal data binding that vb uses so I am not doing anything manually.
I fill a table adapter with information from the dataset and table with this snippet of code:
A program that I'm slated to release, is (Hopefully with help) going to contain Auto-Updating.I've tried publishing using the microsoft Publishing that's offered in VS 2010, but i keep getting errors.I have an unlimited space FTP at my disposal, and i was hoping to do it through that.[code]Or, is there a better way to do Updating and Downloading? Also, for the First run, i would like it to be in an installer.
frmMain.tsProgressBar.Value = 0 frmMain.tsProgressBar.Maximum = 100 Do While byteCount > 0 EncryptCryptoStream.Write(buffer, 0, byteCount)
[Code]...
For some reason, the code to update my progress bar is not working. I uncommented the Msgbox line, and a message is only displayed at 100%. Why is this?
I have a program that has a variety of pick lists updated via an WCF process. For most cases, the pick lists are VERY short. The process I used for the update is overly cautious.The table comes in, then for each row in the incoming table, the matching row in the target table is found, if there is one, and each field is compared. This works fine for those short lists. The whole thing is done on a background thread, anyways, as changes are pretty rare.
cmd.CommandText = "SELECT HydroID FROM GIS_Hydrography WHERE HydroID = " & dr("HydroID").ToString rObj = cmd.ExecuteScalar
I have 200 cars in my database. I may want to select many ie all Ford's and update their color to Blue, I may want to select the top 20 and update them to have a milage of < 20,000..How can I do this on a form? Many otherwise databases I update have an ID in a textbox and I have a SQL command that updates WHERE ID = @ID..I guess some kind of loop? but where do I get the id's? load all the cars into a listview? datagrid..
I am making a project for data entry on VB 2010. Database used is MS ACCESS 2007. In that there are buttons for next, previous, move first, move last, edit,add,delete,save,cancel.The problem is that when i run the code, and delete a record, the record gets deleted and next time i run, that record is not present but when i add a record or edit a record, at that moment it shows the updated record bus as soon as i close the code and run it again, the record is not updated.
I posted this initially, but moderator deemed that it belongs to WPF cause I had the keyword WPF in the title. But I have tried to recode this Windows Form to test out the behaviours. Unfortunately (or fortunately?), the result was the same. *Italics sentence was changed to suits Windows Form*