A program that I'm slated to release, is (Hopefully with help) going to contain Auto-Updating.I've tried publishing using the microsoft Publishing that's offered in VS 2010, but i keep getting errors.I have an unlimited space FTP at my disposal, and i was hoping to do it through that.[code]Or, is there a better way to do Updating and Downloading? Also, for the First run, i would like it to be in an installer.
View 10 RepliesI created a program and published it using the wizard through the "Property" in menu.
When I used the Published program to Install it in my same computer it got installed in "StartMenu".
I didn't get the option to select the Drive for Installing it like what we get when installing other program.
how to make that option to appear on installing the program?
I'm running Windows 7 Pro and am trying to install Visual Studio 2010 Ultimate from a zip drive. When I double-click on the "setup.exe" app, I get the following popup errors (see attached screenshots).
I would think there would be no compatability issues but that's just me!
i want to download VS2010 Beta can i download it normally without having any problems in my VS 2008 Pro edition?or do i need to unistall it first?
View 2 RepliesI have Visual Studio 2010 Professional, version
Microsoft Visual Studio 2010
Version 10.0.30319.1 RTMRel
Microsoft .NET Framework
Version 4.0.30319 RTMRelMy Labtop runs WinXpSp3 Pro, version
5.1.2600 SP3 Build 2600
Physical Mem 1024 MB
Processor X86, Intel 1862 MhzVS installation did not have Crsytal Reports, so i downloaded this single file from [here] as shown in the photo:After installation completed, i could not find the crystal reports any where in the VB2010, so i changed the .Net Frame work from Client profile to .Net framework 4.0 as i found in some blogs, but still did not solve the problem any how.[URL]..
i want a step by step answer iam familiar with vb6 not with vb2010
View 6 RepliesI've been having a problem since installing the first beta of Visual Studio 2010 which has limited what i have been able to do. The problem centres around one reference: System.Design When I attempt to add the reference i get the following error: However, the System.Design.dll file actually does exist and is valid:
[Code]...
I've managed to produce a simple project in vb 2010 express and to publish it onto a cd. I can install the project from the cd and run it successfully on my windows 7 machine where I developed it but trying to install it onto a windows xp machine produces the message:
"An error occurred while downloading a required file...
Details: http://go.micrtosoft.com/fwlink/?linkid=182805
when I try to install it, after it extracts all of the needed temp files, it throws this error, and stops there..."windows cannot find 'C:users*my username*appdatalocal empSIT19120.tmpsetup.exe' make sure you typed the name correctly and then try again."anyone know what the heck I need to do to get this fixed...nothing has changed, not even the file location of the installation files...nothing..also, I just found out, the temp file's name is changed each time I try to run the setup application...
View 2 RepliesI'm working on a MySQL database with a VB.NET front end, and I'd like the installer to first install MySQL and Connector/.NET (if they aren't already installed) and then run a query to load the dump file that I'm including among the program resources.Is this possible, or will I have to instruct my users how to install MySQL and Connector/.NET themselves beforehand?
View 21 RepliesI have an encrypted pfx certificate (for testing purposes the cert is "c:1.pfx" and the password is "Popcorn")and I have been trying to figure a programmatic way of installing this file to my personal store using the System.Security.Cryptography.X509Certificates import.
View 2 RepliesI have an encrypted pfx certificate (for testing purposes the cert is "c:1.pfx" and the password is "Popcorn")and I have been trying to figure a programmatic way of installing this file to my personal store using the System.Security.Cryptography.X509Certificates import.
View 1 RepliesI been reading about the windows services in the msdn but I get lost quick because I'm not sure what it is that I actually need. I'm only using the standard version. Any pointers on how I can give a user the option to install my executable as a service so that it can run when no one is logged in.
View 1 RepliesI had no errors in my VB project it was compiling nicely. I loaded SP 1 today and now I have 102 errors. Actually I'm sure more than that as 102 is the max it will show. It particularly doesn't like the date functions and isDBNull. And it balks at vbcrlf now. Here are some examples of the errors I'm getting:
[Code]...
I have several fonts I want to include in my program to be used, or just want to put them in a folder with my program, or some method of adding them to the program without having to install it on any PC that I want to use the program on.
So basically I want to Either
A. Include the fonts in the program so the program can use them
B. Find a way to have the program use the fonts without them being installed on the PC.
Can I install framework 2.0 and 3.5 after VS 2010 and .net 4.0 is installed ?
View 9 RepliesI've been working on an app for quite awhile and now am at the point where I have to incorporate an Access DB. Tried many things/variations of what I've found...but now am stuck. So here goes:
I have a Form with this
Public Class Form1
Dim objConnection As New OleDbConnection _
("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=|DataDirectory|Test.mdb")
[Code].....
I am working on a program that uses an SQL database which in terms has a dataset .xsd which im using. I need to be able to update my dataset so it can reflect any changes made during run time. I am using the internal data binding that vb uses so I am not doing anything manually.
I fill a table adapter with information from the dataset and table with this snippet of code:
Me.biweeklyTableAdapter.Fill(Me.DDSPayRollDataSet.biweekly, biwk.valpay)
Here is my
frmMain.tsProgressBar.Value = 0
frmMain.tsProgressBar.Maximum = 100
Do While byteCount > 0
EncryptCryptoStream.Write(buffer, 0, byteCount)
[Code]...
For some reason, the code to update my progress bar is not working. I uncommented the Msgbox line, and a message is only displayed at 100%. Why is this?
I have a program that has a variety of pick lists updated via an WCF process. For most cases, the pick lists are VERY short. The process I used for the update is overly cautious.The table comes in, then for each row in the incoming table, the matching row in the target table is found, if there is one, and each field is compared. This works fine for those short lists. The whole thing is done on a background thread, anyways, as changes are pretty rare.
cmd.CommandText = "SELECT HydroID FROM GIS_Hydrography WHERE HydroID = " & dr("HydroID").ToString
rObj = cmd.ExecuteScalar
[code].....
This is the code for my 'validation' form, which reads stored numbers in an access database and compares them against generated lottery numbers to check for winners. It assigns divisions and prizes to each gameID from the table in the database and is supposed to write this information back to the database. However, I get an error on the very last line of code where I tell the data adapter to update the table in the database with the dataset. The actual error it gives me is "InvalidOperationException was unhandled". Here is my code (ask me questions for any clarification):
[Code]...
I have 200 cars in my database. I may want to select many ie all Ford's and update their color to Blue, I may want to select the top 20 and update them to have a milage of < 20,000..How can I do this on a form? Many otherwise databases I update have an ID in a textbox and I have a SQL command that updates WHERE ID = @ID..I guess some kind of loop? but where do I get the id's? load all the cars into a listview? datagrid..
View 5 RepliesI am making a project for data entry on VB 2010. Database used is MS ACCESS 2007. In that there are buttons for next, previous, move first, move last, edit,add,delete,save,cancel.The problem is that when i run the code, and delete a record, the record gets deleted and next time i run, that record is not present but when i add a record or edit a record, at that moment it shows the updated record bus as soon as i close the code and run it again, the record is not updated.
View 7 RepliesI posted this initially, but moderator deemed that it belongs to WPF cause I had the keyword WPF in the title. But I have tried to recode this Windows Form to test out the behaviours. Unfortunately (or fortunately?), the result was the same. *Italics sentence was changed to suits Windows Form*
[Code]...
In our project, we have 2 client PCs having their own local databases and 1 server PC who also have its own local database(.mdf). These three are connected through a local area network so I would like to perform updates to the client PC database from the server PC. There should be two types of update, one is that the server will send its entire database to the clients and overwrite the client's databases and the other is to append the changes made in the server database to the client database. I only want to use vb 2010 so I used the SQL connection class.
View 15 RepliesI have one DataSet and two forms, Customers and Efficiency. When I make changes to the Customers table (Delete a Customer for instance) It does not reflect the changes on the Efficiency table. The default form is Efficiency and I'm calling the Customers form from within the Efficiency form. I make the change in the Customer form, I then close the Customer form and call the Efficiency form back. The data is not updated on the Efficiency side until I close the application and re-open it. what code I need and where to inject this code?
View 14 RepliesI have a single table in a SQL Compact DB (*.sdf) and a Datagridview. When I put the datagridview on the form I connected it to the table in the compact DB. I also have a few button that, Deleted and Add a entry. Delete button obtains the selected datagridview row and resolve the record ID. It then deletes the record in the database. The record gets deleted but the datagridview does not show the update unless I restart the debug session. I make teh same cal to:
Me.TblTableAdapter.Fill(Me.Database1DataSet1.tbl) which is called when the form load that fills the datgridview..
I have a progressbar which receives the amount of Sub directorys within a main directory as a Maximum value and when i run the program It goes through the directorys to grab all the files within the subdirectory.
This is the code below which is updating the progressbar.Foldercount is an incrementer which increments by one for each folder it enters.
Dim percentage As Double = folderCount * 100 cirFolderCount.Maximum
cirFolderCount.Text = percentage.ToString
cirFolderCount.Value = Convert.ToInt32(percentage)
On the test directory which has 4 sub directorys I get a maxvalue of 4 and the min value is set to 0 The code above returns the value of 25.0 when entering the first folder which is correct (25% of 4 is 1),But the progressbar does not fill 25% of bar once this folder is processed.
I have a datagridview and 3 buttons (New, update and delete).When I enter the form and I make changes to the datagridview and I save them, everything works fine.After the first save I make some more changes and I hit save again I get the error:"system.data.dbconcurrencyexception concurrency violation the updatecommand affected 0 of the expected 1 records"
The code I use below:
Private Sub btnAdd_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAdd.Click
Me.dgvOrderRegel.AllowUserToAddRows = True
[code]....
I got an Syntaxerror in my INSERT INTO but i cant figure out why.
[Code]...