VS 2010 - Install The Program - Errors Detected During Operation
Feb 10, 2011
I've written my own program to assist other engineers with their work at my company. Some people have been able to install the program with no problems, others can't seem to get it installed and I'm having trouble figuring out why. They install .Net Framework 4 as this is the Target framework that was setup in the file, although I don't think I fully utilize all the features yet and not sure when I will. I will post the portion of the log that contains the error. If anyone decode some of this so I can track down the problem. I'm not sure if downgrading the necessary version of .Net would work or not, but didn't want to be changing that unless there was a good reason too.
PLATFORM VERSION INFO
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of V:EAUsersRCFPE Files SetupPE Files.application resulted in exception. Following failure messages were detected:
+ Exception occurred loading manifest from file PE Files.exe: the manifest may not be valid or the file could not be opened.
+ Cannot load internal manifest from component file.
ERROR DETAILS
Following errors were detected during this operation.
CODE:
View 1 Replies
ADVERTISEMENT
May 22, 2012
I am trying to load data using a backgroundworker using a code snippet that I found. I think that it would all work fine, except that I am getting an error that I am doing a cross thread operation. The task that I am trying to accomplish is loading data for a large dataset when a command (Run Operation) is called so that I can prepare the user that it may take a long time, and I can display a scrolling marque to show them that the program is not frozen. I am using a separate form to display the warning, an OK button, and a scrolling marque.[code]
View 2 Replies
Feb 4, 2012
im developing an application with an error log, when something goes bad, it must send through mail the error details so i can remotely fix and upload a new update with the fix.Im using Try Catch Exception but i have a lot of methods to include this option in, is there another way to do it without doing so much code?
View 2 Replies
Mar 17, 2010
I'm noticing this error more and more in my error logs. I've read through the questions here talking about this error, but they don't address what I would like to do (see below).
I'm considering three options, in the order of preference:
1) When submitting a form (I use formviews almost exclusively, if that helps), if potentially dangerous characters are detected, automatically strip them out and submit.
2) When submitting a form, if potentially dangerous characters are detected, alert the user and let them fix it before trying again.
3) After the exception is generated, deal with it and alert the user.
I'm hoping one of the first two options might be able to do somewhat globally...I know for the 3rd I'd have to alter a TON of Try-Catch blocks I already have in place. Doable, but labor intensive. I'd rather be proactive about it if at all possible and avoid the exception all together.
Perhaps one approach to #1 would be to write a block of code that could loop through all text entry fields in a formview, during the insert/update event, and strip the characters out. I'm ok with that, but I'd rather not have to heavily alter all my Insert/Update events to accomplish this. Or maybe I just create a different class to do the text checking/deleting, and only insert 1 line of code in each Insert/Update event. If anyone can come up with some example code of any of these approaches that would be a
View 2 Replies
Sep 25, 2009
which compiler errors would be detected out by VB compiler?
I have searched out some compiler errors list for C#, for example, see the website at [URL]
MS provided us the information about C# compiler error. Does MS provide VB compiler errors information as well.VS
View 4 Replies
Mar 18, 2009
I keep recieving cross-thread operation errors, and have read that this is due to my need to change this application (VB.Net Telnet server) to be multithreaded.
View 1 Replies
Aug 11, 2010
Dim NorthWindOledbConnection As String = "Provider=SQLOLEDB;DataSOurce=SARAN-PCSQLEXPRESS;Integrated Security=ssp1;InitialCatalog=Sara"
Dim rs As New ADODB.Recordset()
rs.Open("select * from SecUserPassword", NorthWindOledbConnection, ADODB.CursorTypeEnum.adOpenStatic, ADODB.LockTypeEnum.adLockBatchOptimistic)
i tried to run this above code in visual studio 2008... it shows the following error........
"Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done"
View 2 Replies
Dec 29, 2010
had 3 courses in computer science 10 years ago and decided to go into economics. After a 6 year and continuing career in economics, I decided to dabble in code to assist my economic career. In this pursuit, I have developed some neat things, but I have a simple problem. I code an application, hit build, hit publish, receive a setup and manifest, then put it on my usb drive. Plug the usb drive into another computer. Drag the setup and manifest to the hard drive, hit the button, a graphic regarding Launching Application comes up, then immediately a window comes up stating:
Cannot Start Application.Cannot download the application. The application is missing required files. Contact application vendor for assistance.
The errors stem from the manifest file. It says downloading the file (file path) Hello.exe.manifest did not succeed. It then follows with 3 lines of filepaths for the Hello.exe.manifest.
I am running VB 2010 express. I made a slot machine game for my mother for her birthday one Computer A. I moved the published files to Computer B as described above to test before giving to my mother. The game isn't too important at this point because I tried to test whether the game itself was the problem or if it was my error in lack of knowledge of how to deploy. As such, I created a program called Hello. In Hello, there is simply a form1 and a button1. When clicked, button1 displays a messagebox with some text. Not a rocket science program.
My intention is simply this:Allow the Hello program to be put on another computer via a USB drive and then installed.The two computers are not networked and let's assume the second computer cannot connect to the internet. When I go to the wizard, I select the location I want to publish to. In this situation, my desktop.Next, I select CD-ROM/DVD-ROM instead of UNC path or website. I don't know what UNC path is. I presume CD-ROM/DVD-ROM would be similar to USB drive in that it is a removal data storage item.I chose that the application will NOT check for updates.Finally, I receive this:The application will be published to:
file:///C:/Users/ComputerA/Desktop/
Where I find the files, put them on the USB drive and try to install on Computer B.Also, for more information, I can use those files on the originating computer and they do SUCCESSFULLY install and I can use the application. I have not figured out why it will not install on another computer.
View 4 Replies
Mar 1, 2012
In the past I have written VB6 and VB NET 2005 programs that are installed and on the user's computer. This had to be done because the salesmen in our company have has a set of local data on their laptops so that they could do work and not be connected to our network. I would then sync the files when they connected to the network. (This same program is used by the rest of the company as well, but everyone else uses network data.)We are now at the point where we are not using any local data. Our salesmen access our network data using an iPad, VPN, and a Citrix server, which works fine
View 2 Replies
Feb 24, 2011
I'm making a downloader program in Visual Basic 2010, and it calculates the current download speed, the approximate time left and all that good stuff.But when I download certain files, the program decides to f*** up.The program stays still for a bit, and nothing happens when i click download button, but then all out the sudden the download starts like normal but an error message pops up and it says:
"Arithmetic operation resulted in an overflow"As I previously said, this error message only pops up on certain files.Then I started to do some "error-investigating" xD, and i found out that this line caused the error msg:
dlspeed = e.BytesReceived / SW.ElapsedMilliseconds
remainingtime = ((e.TotalBytesToReceive - e.BytesReceived) / dlspeed) / 1000
lbl_dlspeed.Text = Math.Round(dlspeed) & " kB/s"
That code is written in the web_downloadprogresschanged class.And SW is a stopwatch.I mean, it still downloads fully and such, but it looks ugly when an error message pops up even though it works.
View 5 Replies
May 16, 2012
How can I tell what the size of my program is and how much disk space is needed to install. When I publish the program and install it on another machine it will show up in the control panel but does not show what size the program is?Also when I publish updates with it says something like installing 10mb. Is this an additional 10 mb everytime, I guess not, but can someone explain what it all means?
View 10 Replies
Jan 6, 2012
End A statement which as far as i know doesn't close you program properly and hides errors. Right now i'm being forced to use end because i don't know how else to close my program properly. I'm not sure where my problem is but some of you should be able to fix it. I'm trying to make a game using directx with a game loop. This code is the skeleton of what i'm making.
Public Class Form1
Private ProgRunning As Boolean = True
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Me.Load
Me.Show() 'Make the form appear
Me.Focus() 'Give the form focus
[CODE]...
This code runs alright because end is being used but if you rem end out the error which it's hiding comes out. The error is "Object reference not set to an instance of an object." I'm not totally sure but i'm guessing that the error is refering to the form.
View 9 Replies
Nov 10, 2009
I'm looking to make a simple install wizard to install my program (I know Visual Studio 2010 already has an installer) but anyway, I would like to make it myself, kind of line reinvent the wheel?
View 3 Replies
Dec 3, 2010
CLR detected an invalid program
View 8 Replies
Jan 3, 2012
I've developed a simple program and in it I 'copy-pasted' some code which makes a copy of the program executable in a particular path (docs folder) and sets registry to start the executable in windows start-up only.. Everything is working absolutely fine in my PC. But when I sent the exe to my friend's PC. Then the antivirus in her PC detected it as a trojan!
[Code]....
View 2 Replies
Jun 4, 2012
I want to make an internet checker , but I don't know what's the problem with this PinvokeStackImbalance. Actually, the code was made for Visual Basic 2008, But I`m using Visual Basic 2010.
WebTest = CBool(InternetGetConnectedState(dwflags, 0&))
Where's the problem? Btw, it's a module.
View 1 Replies
Feb 15, 2012
[code]A call to PInvoke function 'WindowsApplication1!WindowsApplication1.FEUSB::FEUSB_ScanAndOpen' has unbalanced the stack. This is likely because the managed PInvoke signature does not match the unmanaged target signature. Check that the calling convention and parameters of the PInvoke signature match the target unmanaged signature."
View 3 Replies
Mar 8, 2011
I'm using the following code and it's bringing up this error 'PInvokeStackImbalance was detected'.
Public Class Form1
Private Declare Function GetAsyncKeyState Lib "user32" (ByVal vkey As Long) As Integer
[code]....
View 3 Replies
Apr 15, 2010
Is it possible to install VS 2010 first,then install VS2008?i am asking this because in many cases(specially while installing the O.S) i see that after installing the higher version the lower version of O.S cant be installed....and if want to install linux then it might be installed after installing all the windows O.S starting from xp,then vista,then win7 and finally fedora 12..
View 8 Replies
Jan 4, 2012
So when i build or click debug on my program. No errors come up and its smooth. So i decide to publish my programme. However. I come up with a bunch of errors during the publishing.
Here they are:Error 1 Cannot publish because a project failed to build. 1 1 Simple CALC
Error 2 Unable to copy file "binReleaseSimple CALC.exe.manifest" to "binReleaseapp.publishApplication FilesSimple CALC_1_0_0_0Simple CALC.exe.manifest". The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
View 3 Replies
Jun 9, 2011
Im having kind of trouble looking for this info, but i created a POS program that when i install it, it install under Local SettingsApps2.0labla
So what i want to know if how can i make my system install like any other program, "Under Program Files/POSystem/" like so
View 2 Replies
May 26, 2009
I have a program in vb express 2008 which I would like to publish in a little more professional manner than provided in the standard vb express package. I would at least like to include a "Terms of Use" document the user must agree to before installing the program. I have dovnloaded and installed web developer, c# and vs 2008. Do any of these include a professional installer? If not are there any free installer packages available? I am 72 and live on a limited budget so I cannot aford an expensive package for one program.
View 3 Replies
Jun 21, 2010
Well I used the Visual Studio 2010 installer to install my application and I want it to be able to change the version displayed in the in the Add/ Remove Programs (in the Control Panel). How can I do this without going through the install wizard again?
View 3 Replies
Jul 24, 2009
How would you after the user install your program have it run? Is they code you can add to your program so after install it runs?
View 8 Replies
Feb 16, 2010
How do you install VB Libs ? the .DLL's ?
View 6 Replies
Apr 20, 2011
I create the program using wndow vista. and i want to install it on other cmputer and it using wndow xp pro.
View 4 Replies
Apr 25, 2011
I am using VB.NET Framework 3.5 . I have a very complicated program with over 40 forms and 100s of lines of coding. Earlier today, this program worked perfectly. I decided to change the Assembly Name from APA to Salamander. I do not get any errors and things seem to be going fine. Upon the next debug, the splash screen loads fine. (I am using a timer to proceed to the main form, not the inbuilt splash screen setting as I found it to be more reliable). However, when the main form loads, none of the pictures (resources) load and it exits itself immediately yet no errors appear at all. I think it might be to do with the .resources file but I really don't know. As I only started Visual Basic less than two months ago I'm not sure what all the files other than .vb files actually are.I really don't want to have to completely rebuild the program as my release date is in five days and as I am still at school I don't have time to complete it on top of homework. I have tried changing the assembly name back to APA again but it still does not work. I am completely stumped.
View 2 Replies
May 11, 2012
for our culminating activity we must make a program that uses a bunch of things etc.
i decided to go the extra mile and make sudoku.
The problem lies in generating the puzzle, the program always crashes, but there is never an error. im sure there are easy ways to make the generator, but from what we've learned this is the only way i know how to do it.
Private Sub FirstBlock()
Randomize()
intNumber(0, 0) = Int(9 * Rnd() + 1)
[Code]....
i made a function for each 3x3 square, and what happens is the block its currently on, checks for interferences horizontally, vertically, and within each 3x3 square, because computers process in order, i set it so that it only checks for previous block interferences, since this is the first 3x3 quadrant, there are no previous horizontal/verticals to check.
The code works fine, the problem is when i run it, it says its running but no form appears, i learned to use a progressbar to try and separate each 3x3 block to generate individually, to try and split the processes up 1 second at a time. the problem is, it does run, but it only generates a certain amount before it crashes, and every time its different, sometimes it generates half the puzzle, sometimes 1/3rd, sometimes only the first quadrant.
View 13 Replies
Mar 7, 2012
Is it ok to install my VS 2010 Ultimate even if I already have VB 2010 Express Edition? or should I uninstall the express edition first?
View 3 Replies
Jun 14, 2011
I recently finshed a program and made a finshed copy of it when I tested it on my computer it installed correctly but when I tryed to use it on a nother computer I got a error saying application download did not succeed.Check your network connection, or contact your administor or network service provider.[code]...
View 1 Replies
