VS 2010 : Populate Rdlc From Pre Populated Dataset?
Nov 10, 2010
I am creating a custom design for printing (RDLC)Is this possible to populate my rdlc from pre populated Dataset?I am populating my dataset like this
Private Sub populateExam()
Dim daClients As New SqlDataAdapter
Dim dsClients As New DataSet
[code]....
My Dataset hold only 1 record from my database.I need to pass that record into my cutomize page for printing.This is my layout. the red rectangle is the place for the values.
View 1 Replies
ADVERTISEMENT
May 1, 2012
i have a Userform that I created in MS Word that automates almost half my job. I'm just looking to re-create this form in VB.Net so that I can keep up with the trends.What I did previously was load a listbox based on the contents of a data table in another word document. I've searched for other methods of creating a datasource in VB 2010 Express but I'm unsure how to load the contents of a dataset or datatable as opposed to a table from MS Word. Ideally, I'd like to abandon using Word tables and create a dataset in VB and load a listbox based on that. I do not have a copy of MS Access and I'm unfamiliar with MySql, which I'm guessing would are the easiest methods of loading a dataset. I also thought that maybe if I could create a seperate form (let's just call it form1) specifically for entering new data and saving the form as data is added, then linking the datasource from that form to a second form (form2) that has the listbox that will populate with the contents from the data in form1.
View 11 Replies
Mar 26, 2010
Is it possible to get the dataset name from an rdlc file? I have found several demonstations on how to get the datasource, but not the dataset nor the tabladapter.
Thought, but dont know if it is possible or not.
When you run your app. could you read the rdlc as an XML file?
View 2 Replies
Nov 15, 2010
Q:how can i add columns dynamically to rdlc report from dataset in windows based.
View 1 Replies
Apr 8, 2009
I have a DataGridView on a form that is being populated from a SQL table dataset by giving criteria from a previous form. I have 6 columns in the dataset, of which the last column should be combo box column containing items "Done" and "Pending". How do I make this bound column to a combo box column and display the value as well as the alternate item too in the combo box?
View 6 Replies
Jun 30, 2011
I've been googling around to find a way to dynamically assign a DataSet to an rdlc report but i was unable to find a clear method to do it.Does anyone know if there is a way? I end up trying to use this method because i also found no way of adding parameters to the rdlc report. The VS documentation is vague on this issue..
View 4 Replies
Apr 2, 2012
I've been googling around to find a way of inserting a subreport by using the designer. So i created a new RDLC report and inserted a subreport on the existing RDLC report. Then i changed the Name property of the subreport to the name of the second RDLC, without the rdlc extension. At execution time it fails with the message:"The ReportName for the subreport Unicre_Report_Comm_SR is not valid. A ReportName can not be an empty string or just white space."
View 1 Replies
May 8, 2012
I am new to Visual Basic and I'm trying to make a simple combo box that automatically populates from dataset. The table is from BaseMaterial with the column Material.
View 5 Replies
Sep 17, 2009
I am trying to populate a dataset from an XML file. Within the xml file are some € signs. However, when the data is read from the XML, the € sign is displayed as a ?. Has anyone seen this behaviour before, and if so do you know how to correct this? Below is a copy of the code i use to read the data from the xml file:
Public Function ReadExportFile(ByVal sFilePath As String) As Boolean
Try
msExportFile = sFilePath
[Code].....
View 3 Replies
Apr 8, 2010
Is it possible to populate a listview with a dataset? I have a function that returns a dataset. Why im asking this is because my SQL is quite complicated and i can't convert it to a SQLDataSource..
[Code]...
View 2 Replies
Feb 24, 2012
I'm trying to populate an array from a dataset with only specific column using vb.net 2010. is there any code to populate the array directly or must i make the use of a query?
View 1 Replies
Mar 12, 2009
I'm trying to populate a combo box with a dataset, this sort of works, but everything is just appearing on the same line. I think this answer might be to put the dataset into an array, then put the array into the combo box.
...problem is, I'm not sure how to do this! My code thus far is,
Dim usernameList As Array
'Retrieve usernames where player has available status
GetFilteredData()
[Code].....
View 1 Replies
Jan 6, 2011
My problem is that I can't populate a datgrid with the contents of a dataset. Having searched for the last few days to try and resolve this, I have given up and thought I would try here. I am using Visual Studio 2010 and attempting to create a WPF application. As you can tell from the code I am very new to this and any suggestions for improvement will be most welcome. I can see that the dataset is populated ok via the visualizer, I have a datagrid 'dgBOM' which I want to display the results. A popular solution in my searches was to add '.DataSource' but when I type the '.' after dgBOM the Datasource option is not there.
Code:
Public Sub Connect()
Dim cn As OleDbConnection
Dim cmd As OleDbCommand
Dim dr As OleDbDataReader
[Code].....
View 1 Replies
Oct 12, 2011
I have need for a database in my latest app, i quickly realised it had been a long time since i last used a database and am in fact very very rusty on the subject. So i decided to create a simple DataSet using the designer, i created 2 tables as follows
Table 1 is Named Map and contains a 2 dimensional array each cell containing an array of object id's of anything in that cell, and a level ID.
Table 2 contains data about these objects ie size weight and a z-order, again referenced by an object id (matching Table1)
This i did with no issues, when it came however to actually populating these tables i drew a blank. Do i have to locate the database file and edit with notepad? I presume not. Maybe i have to use an external app like sqlmanager? I seem to recall from my past that i added table rows from within the designer but i cannot find this in 2010 express
View 12 Replies
Feb 21, 2011
This is a problem I have been trying to conquer for some time now and haven't managed to deal with. I've looked pretty hard on Google and so on, but most of what I find there is for populating a TreeView from a database. The closest I got was a bit of C# code for populating with a list of file paths. But unfortunately the result is individual roots & branches for each item.
What I'm working on is a message template tool where I'm trying to get the nodes in the treeview, which represents the templates, to populate from an XML file. I'm using DataSets for their simplicity of working with XML. Here's a basic example of the structure of the XML which is imported to the DataSet;
Code:
<?xml version="1.0" standalone="yes"?>
<Templates>
<Item>
[Code].....
So the path to each node will look like RootBranchName. I know this will no doubt require some recursion, but recursion is one thing I haven't fully grasped yet.
View 5 Replies
Jan 6, 2010
Im wondering how to use a dataset to populate a textbox. For example, textbox1.text needs to display information from a table with a few rows of data
View 14 Replies
Oct 21, 2011
I have an rdlc report that always produces the last page in blank. In this page, the header and the footer are printed but no data is shown (all data finishes in the previous page). I already checked and re-checked the horizontal and vertical printable areas and all the report definitions fit into these areas (if not, a blank page will be produced in between each page, I guess). If the report has one page, two pages are printed, if there are ten pages with data, eleven pages are printed
View 4 Replies
Jan 6, 2012
How do I loop through a dataset and populate a DataGridView - heres my code. Hopefully someone can point out where Im going wrong... Not getting a specific error, just failed message box. when i take out the try/catch function then Im given no error but the DataGridView does not populate.
[Code]...
View 10 Replies
Dec 14, 2011
I have a simple access database that a log record gets written to a few times an hour.
I'm trying to make a DataGridView that shows that data as it arrives.
My "Solution" is simple;
when a user clicks the view -> read from the database (fill the datatable) -> update the view.
Not what I dreamed of, but functional, if totally sub-optimal.
However, my "solution" is a dud, using fill draws every single record from the database, even if there are already 599 on screen.
Really, I just want fill the datatable once, and add new records as they arrive (or on click if needs be).
Bonus point if you can also explain another way (that isn't called so often) to hide the ID column, and change the header of column 1 (named DateTimeStamp) to TimeStamp.
Public Class FormMain
Shared dataAdapter As OleDbDataAdapter
Shared logTable As New DataTable("log")
[Code]....
View 1 Replies
Sep 10, 2007
I was wondering what is the most efficient way to populate a dataset from an excel worksheet.I have tried many ways but most are very inconvenient.
View 3 Replies
Mar 8, 2011
I am creating an electronic display board using Visual Studio 2005, this will be an application using VB and not web based.What I am trying to do is use labels dynamicly and populate them from a dataset, Now there is a lot of labels on this board and to be honest the perfect solution would be to use a Data Grid View, unfortuantly I have to fit the information into a Custom Graphic that was created, hence the reason for labels.So obliviously I dont want to have to name each label and specify its information, for example:
Code:
Label1.text = MyDataSet.Tables(0).Rows(0).Item(0)
Label2.text = MyDataSet.Tables(0).Rows(1).Item(0)
Label3.text = MyDataSet.Tables(0).Rows(2).Item(0)
So I thought about something as follows but not sure how to get it work.Say I new I had 100 Labels Label1 to Label100.
Code:
Dim i as Integer
For i = 1 to 100
[code]....
Now the above doesnt work but it doesnt throw up any errors either.
View 4 Replies
Feb 20, 2009
I'm having a little trouble figuring how to do this.I have a dataset with a single table. Each row has the following fields ProductName, Version, CompanyName
The data might look like this
Visual Studio, 2005, Microsoft
Visual Studio, 2008, Microsoft
Office, 2007, Microsoft
I have already populated the TreeView with a list of Company names from a separate table. Now, what I want to do is to loop through my dataset adding a single node for each product under the appropriate manufacturer. Then under each product adding a separate node for each version of that product.
[Code]...
View 2 Replies
May 15, 2012
i defined a list of DataTables
Dim PreSubTables As New List(Of DataTable)()
Then I parse some source files and depending on the data, possibly none of the tables in the list PreSubTables2 might be populated, so it's just an empty list. Later on when i refer to the first table in the list , I get "index out of range error"
If (PreSubTables(0).Rows.Count > 0) Then ...
' just dealing with the first table: PreSubtables(0)
For ii = 0 To (PreSubTables(0).Rows.Count - 1)
[Code]....
I'm just trying to come up with a line that checks whether the(at least the first)Table in the list is populated, before I can print it out or do other things.
View 2 Replies
Jun 11, 2012
I want to design RDLC report via visual studio 2010, it is big different with visual studio 2008. Please guide me create RDLC report in visual studio 2010. I have a Class table combine with table Student with 1...* relationship in database. I will fill this data into report which one each row of Class table is row group and multiple students below. Example: [URL]
View 1 Replies
Feb 16, 2010
I am attempting to discover how I can populate a ComboBox with the data values already located in a data source that has been added to my project. I know how to use the ComboBox.Add method. I also know how to add individual value items contained in a manually entered array at design time using the For Each Next loop. However, I am unable to populate a ComboBox with all values for a field of a table in a data source that has been added to my project. I assume that I am unaware of some simple referencing step that will solve this problem.
[Code]...
View 10 Replies
Oct 1, 2009
I'm a bigginer in Visual Studio. I have created the forms using Visual Studio Professional 2005 and a database using Microsoft SQL Server 2005. I have some combo boxes in the forms and want to populate them using the dataset which I have attached to the VB.net project. I used the following method.. but when I run the project, the combo box is still empty..
[Code]...
View 4 Replies
Jun 3, 2010
There's a thread that i'd read wherein you reply regarding on shortcut on populating a listview with databatable or dataset, but i forgot it. How did you populate a listview with datatable or dataset with just one line.
In datagridview .DataSource how about in listview ?
View 2 Replies
Aug 11, 2009
I am working in vb.net and i have a simple requirement. I have added a MDB file to a dataset and it contains 21 tables. I have a datagridview and a combobox on my form. I was able to get the combobox populated with the table names available in the dataset by iterating through dataset.tables. Now i want to add the feature where the user can select the table name from the combo and then it should populate the contents of that table. I tried the following Code
[Code]....
View 2 Replies
Oct 28, 2009
how to populate my Dataset into Crystal Reports and exporting to PDF File?
View 2 Replies
Aug 17, 2010
I have a listbox with a dataset and a query that is used to populate the listbox. Now, depending on the selection of the listbox. I want to populate a variety of labels with specific information from the dataset with the selected listbox item as the key. Here is the code I have so far... but I am unsure how to continue....
Public Class frmItemsToCal
Private Sub frmItemsToCal_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'BISEMv2DataSet.Equipment' table. You can move, or remove it, as needed.
Me.EquipmentTableAdapter.Fill(Me.BISEMv2DataSet.Equipment)
[code]....
View 2 Replies
