I am trying to take a line from a text file and get the second half of the line "my.settings.useqs = true" is my example and i want to get true out of the line and then make a textbox contain the text aftter the = sign basicly.
http:[url].......
the following code was to be entered to read each line of the file "line by line" It did not work for me as instructed and I am trying to understand why?
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim FILE_NAME As String = "C:UsersOwnerDocuments est.txt"
Dim objReader As New System.IO.StreamReader(FILE_NAME)
Dim TextLine As String
[code]....
I want to modify a text file. It has a lot of lines of text in it. I want to add a line after a specific line (in the middle on other lines) and write strings there.
The code i have, writes to a specific line but it also overwrites the text on that line:
[Code].....
i would like to store contents from a text file line by line to arrays before copying them to another text file. what i have is currently like this:
[Code]...
Currently I'm only able to store the whole content into one variable, would like to store the content line by line in arrays.
I'm reading a text file with StreamReader, line by line. If a condition is met, then I do an operation and then start reading the file again from the first line. I realize I could close and then re-open the file, but surely this would be very slow.
I could do this easily in VB6, but pulling my hair out trying to do this in vB.net. It seems that 'Seek' is the function to use, but it doesn't work.
I've seen other examples, where it works, but you must open it a different way -- with a file number.
Imports System.IO
Dim I as Integer
Dim LineText as String
[Code].....
Basically what I'm trying to do is read a text file line by line. After each line is read, it will put each line into a separate text box. I've been trying to do this for a while and so far I haven't been able to. I tried using a for loop, but that just put all my lines in to one textbox.
View 8 RepliesI've been looking through the FCL for a method that will allow me to erase a line of text from a text file and replace it with another line of text. Neither the StreamReader nor StreamWriter have a method for replacing or removing Text from a text file, as does the string object. Are there any available methods for erasing just certain lines of text from a file, and then replacing them with others?
In my code, I'd like to locate a certain line in the text file, and then at that point in the text file, use a For...Next Loop to replace each successive line of the text file with new text:
Dim user_data_file As String = "user_data.txt"
edit_input = New StreamReader(user_data_file)
Dim edit_line As String = edit_input.ReadLine
[CODE]...
However, I can't find any methods that will allow me to do this.
how to read text from a listbox line by line and put current line in a label?
View 3 Replieswhat i need to do is open a txt file, read line by line, decode each line into an array and display. Now all works ok apart from one line.
sTextLine = objReader.ReadLine() <-- Value of string cannot be converted.
full code here
-------------
Dim objReader As New System.IO.StreamReader(sOpenFile.Text)
Dim sTextLine As New ArrayList()
Dim sText As String = ""
Dim i As Integer = 0
[code]....
I have to create a new program that reads to Text files. These text files are in the form of a report (with column headings). The purpose is to compare each record line by line to see if their have been any changes made. The record is based on an Account#. Over time these files will be considerably large. What is the best way to do compare records from each file. I'm thinking loading each file into an array and processing them that way.
View 7 RepliesBasically, I'm creating an application which takes a list of words in .txt format, such like this:
Abc
Def
Ghi
Jkl
mno
What I want to be able to do is modify the words, one by one, so that I end with
Abc1
Def1
Ghi1
Jkl1
mno1
or whatever the user wants.
I created this app in C++ to get the logic, since I am more confident with that
I must use streamreader to read text file line by line into array.
Here's what I've got.
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Dim numbers() As Double = New StreamReader(txtfile.Text)
Dim numbersarray() As Double
[Code].....
I just joined this forum as I've been looking for a nice and serious VB forum for a long time
I'm having troubles making a program to search a text file line by line for a specific string.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim objReader As New System.IO.StreamReader("C: est.txt")
[Code]...
as you can see in the code its supposed to read a text file and if the line contains the same string as in the textbox then its gonna make a messagebox.
now the problem, if the line does not contain the specific string but the next or any line other line does, then it should automatically read the next line on "Else" and that's where I'm lost
for a "Readnextline" command or something like that?
I have a list of random numbers in my text file.I read it like this.
Dim FILE_NAME As String = "C: est.txt"
Dim TextLine As String
If System.IO.File.Exists(FILE_NAME) = True Then
[code]....
How can I separate that in to 2 listbox?In my ListBox1 I want add lines with starting number like this ( 0905, 0906, 0915, 0916, 0917, 0926, 0927 ) And in my ListBox2 is with numbers start with this ( 0909, 0910, 0912, 0918, 0919, 0920, 0921, 0928, 0929 )How can I compare lines by multiple choices like that?
Ok, I saw this code on the net
Dim sFileName As String
Dim srFileReader As System.IO.StreamReader
Dim sInputLine As String
sFileName = "D:UsersArbenDesktopSerieA.txt"
srFileReader = System.IO.File.OpenText(sFileName)
[Code]...
under the code I pasted at the top, but I get the text on line1 in all labels, like all labels become 1, while the text should be 1, 2, 3 and so on. So anyone can help me do that, each label gets the value of the next line in the txt file
How would i go about reading a file Line by Line that within that line The values are delimited by " Example of the data:
"bob" "cat" "1243"
"steve" dog" "6789"
I've started this with this code but not sure how to go about the next stage:
Using MyReader As New _
Microsoft.VisualBasic.FileIO.TextFieldParser(My.Application.Info.DirectoryPath & "Records28112011.jd")
MyReader.TextFieldType = FileIO.FieldType.Delimited
[code]....
i need my program to enter text into a txt file but, i can not seem to find out how to make it press enter, and i what i mean is my program adds to the text like this...[code]
View 2 RepliesI have a text file like below;
606;16
101 GAZ MET.MED. - VIC.BRANESTI 2011-01-11T11:00:00
102 BRASOV - TARGU MURES 2011-01-11T10:30:00
[code].....
i got vb to read the text file but it reads the whole thing and displays it on a text line,how can i make it so it reads it like 1 line at a time after every click,so if my text file is like this
hello
goodbye
then i dont want it to display both, i want it to display hello and if i click a button again then it displays goodbye?
i am doing program to read text file and fill the data to multi array , in my code i tried to read the first line of text file to array (here i used class) to save this data on it, because i will use it to read the another lines , files have the following format (all numbers are integers, all intra-line separators are spaces): First line: Number of events, number of rooms, number of features, number of students after the first line as u see we have 3 line have 10 which mean the One line for each room:Roomsize and after that the line which start from zeros and ones it format as:-
4 3 3 2
10
10
[code]....
I have a list of random numbers in my text file.
I read it like this.
Code:
Dim FILE_NAME As String = "C: est.txt"
Dim TextLine As String
If System.IO.File.Exists(FILE_NAME) = True Then
[Code]....
How can I separate that in to 2 listbox?
In my ListBox1 I want add lines with starting number like this ( 0905, 0906, 0915, 0916, 0917, 0926, 0927 )
And in my ListBox2 is with numbers start with this ( 0909, 0910, 0912, 0918, 0919, 0920, 0921, 0928, 0929 )
How can I compare lines by multiple choices like that?
I'm still trying to write a text file using input value from textbox growth line by line...it mean everytime i keep in teh value in text box...it will write into textfile in new line... how to rename my text file by current date?...
View 2 Replieshow to read a simple text file line by line like when you're writing to a file with System.IO.StreamWriter where you write to the file line by line.
View 5 RepliesI am trying to append a new line to a text file. Sometimes it posts to a new line (like I want it to) and sometimes it appends to the current line, consequently screwing up my read. I even put VbNewLine in the code.
Here is the snippet:
Dim outputline2 As String
outputline2 = equip & "," & value
Dim myfile2 = File.AppendText("equiped.txt")
myfile2.WriteLine(outputline2, vbNewLine)
myfile2.Close()
[URL]
I have a comma delimited text file, like this;
[URL]
my program can add new lines and select url's but I can't get the remove button working, I read that (maybe) I have to read all lines and write a new file.
If removename = currentfield Then
Dim removedata As New System.IO.StreamWriter("z:station.list.txt")
removedata.Write(""(currentfield))
removedata.Close()
End If
I remove a line from a textfile with the following code. It works fine, but when I remove the first line, a blank line has been left. How can I fix this?
Public Sub DelLineFromFile(ByVal filename As String, ByVal line As Integer)
Try
Dim lines As String() = My.Computer.FileSystem.ReadAllText( _
[code].....
I'm trying to have a program remove lines from a text file if they start with a certain string. I haven't had much luck with this over the past couple of days so I thought I'd try and get some advice.
This is the code that I've tried most recently, and makes some sense to me, but gives a "A first chance exception of type 'System.ArgumentOutOfRangeException' occurred in mscorlib.dll" error:
Dim SourcePath As String = "C: est.txt"
Dim fileLines As List(Of String)
fileLines = New List(Of String)(File.ReadAllLines(SourcePath))
[Code].....
I am reading a list of IP's from a text file. After every procedure, the first IP (the first line) needs to be removed, and the new first IP will be read at the beginning of the next procedure. Basically, I just need to know how to get rid of the first line of a text file completely. For example, I'd like to go from this:
1.1.1.1:80
2.2.2.2:80
3.3.3.3:80
[code]....
im making a game that reads text files off of an ftp server. everything is working great. except for the fact that i cant read more then the first line of the players text file. how would i use substring to, for example, look for 'inventory' and get all the info under 'inventory' and above the next title?
View 1 RepliesOkay, so I've been looking on the web for a way to read only ONE line out of a text file. Recently I've gotten by by creating separate text file for each line (such as a text file named, "Username", another named "Password", instead of creating a single text file with both the user name and password.) Now I am faced with having to do this. I want a quick and easy way, VB won't let me do open file as input #1 for some reason. I just need the second line of text out of this text file. What is the quickest and easiest (and painless) way of doing this?
View 8 Replies