I am reading a list of IP's from a text file. After every procedure, the first IP (the first line) needs to be removed, and the new first IP will be read at the beginning of the next procedure. Basically, I just need to know how to get rid of the first line of a text file completely. For example, I'd like to go from this:
1.1.1.1:80
2.2.2.2:80
3.3.3.3:80
[code]....
I'm trying to have a program remove lines from a text file if they start with a certain string. I haven't had much luck with this over the past couple of days so I thought I'd try and get some advice.
This is the code that I've tried most recently, and makes some sense to me, but gives a "A first chance exception of type 'System.ArgumentOutOfRangeException' occurred in mscorlib.dll" error:
Dim SourcePath As String = "C: est.txt"
Dim fileLines As List(Of String)
fileLines = New List(Of String)(File.ReadAllLines(SourcePath))
[Code].....
I'm trying to remove a line from a text file that begins with a set value.
The idea would be to paste values into a Windows form, which then finds each line that begins with that value (a 5 digit number) and removes those lines from the file, and then removes the gaps.
I'm really stuck on something, which, is probably easy, but I've blown hours trying to figure this out.I need to be able to remove 1 line from a textfile. I will always know exactly what line it is, as, it's the same "string" as a variable. So if my variable is called "removeThis" then I need to be able to Read through the textfile, find the line that is equal to the removeThis string variable, and then rewrite the whole textfile.
View 3 RepliesI am writing an app that writes notes, inserted by the user, to a txt file. The app saves that notes to a txt file, and when opening it reads the file and shows the already inserted notes. However, I want the user to be able to delete some of those notes...but I can't seem to do it...this is what I have:
VB
Dim file As New FileStream(data_path & "notes.txt", FileMode.Open)
Dim text As String = Nothing
Dim reader As New StreamReader(file)
[Code]....
It goes fine, but the text.Replace(value, "") line doesn't seem to work. I've also tried text.Remove(0) but it doesn't removes the line...it looks like it has no effect.
How do i read through a textfile line by line checking for and removing duplicate values?
View 1 Repliesthe following code was to be entered to read each line of the file "line by line" It did not work for me as instructed and I am trying to understand why?
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim FILE_NAME As String = "C:UsersOwnerDocuments est.txt"
Dim objReader As New System.IO.StreamReader(FILE_NAME)
Dim TextLine As String
[code]....
I have a textbox multiline and i want to remove each first element of the textbox.
[Code]...
How i can remove the first element of each line of the textbox ?
I'm trying to build an app that would search a text file for a string entered by the user, and delete the line of text containing that string. Here's the code I have. The code works, but since I'm relatively new to VB and programming as a whole, I was wondering if there's a better method out there. he strFilePath is handled by the openfilediaglog
Dim strSearch As String = Replace(MaskedTextBox1.Text, "-", "")
Dim strLine As String = Nothing
Dim strAllText As String = Nothing
[code].....
I have strMyString that contains about 5000 lines of data. There are some lines of data that need removing if they contain a certain string, such as "http", "www.", ".com", "cat", "fish", etc. The whole line needs removing. Each line is separated by a vbNewLine or similar.
How can I do that? Does it need pasting into a rich textbox first before processing?
I am making a program that loads files into a ListBox, loops through each one, and if the last line of the file begins with "@", it removes that last line.Now, I am not really sure how to do this.Would I use LineReader?How would I check the first character?
View 4 RepliesI am trying to take a line from a text file and get the second half of the line "my.settings.useqs = true" is my example and i want to get true out of the line and then make a textbox contain the text aftter the = sign basicly.
http:[url].......
I am trying to append a new line to a text file. Sometimes it posts to a new line (like I want it to) and sometimes it appends to the current line, consequently screwing up my read. I even put VbNewLine in the code.
Here is the snippet:
Dim outputline2 As String
outputline2 = equip & "," & value
Dim myfile2 = File.AppendText("equiped.txt")
myfile2.WriteLine(outputline2, vbNewLine)
myfile2.Close()
[URL]
I have a comma delimited text file, like this;
[URL]
my program can add new lines and select url's but I can't get the remove button working, I read that (maybe) I have to read all lines and write a new file.
If removename = currentfield Then
Dim removedata As New System.IO.StreamWriter("z:station.list.txt")
removedata.Write(""(currentfield))
removedata.Close()
End If
I remove a line from a textfile with the following code. It works fine, but when I remove the first line, a blank line has been left. How can I fix this?
Public Sub DelLineFromFile(ByVal filename As String, ByVal line As Integer)
Try
Dim lines As String() = My.Computer.FileSystem.ReadAllText( _
[code].....
im making a game that reads text files off of an ftp server. everything is working great. except for the fact that i cant read more then the first line of the players text file. how would i use substring to, for example, look for 'inventory' and get all the info under 'inventory' and above the next title?
View 1 RepliesOkay, so I've been looking on the web for a way to read only ONE line out of a text file. Recently I've gotten by by creating separate text file for each line (such as a text file named, "Username", another named "Password", instead of creating a single text file with both the user name and password.) Now I am faced with having to do this. I want a quick and easy way, VB won't let me do open file as input #1 for some reason. I just need the second line of text out of this text file. What is the quickest and easiest (and painless) way of doing this?
View 8 RepliesI'm new here, but have been in and out for a while. Past threads have been helping me along thus far.
I'm currently developing an app which essentially needs a way for me to search in a text box or file for a specific string, and extract the line on which that string appears on. It will be unique, and the syntax is the same on each line. It has basically 2 ID numbers, and is laid out like this:
123456|123456
So, I'd need to search for the first part before the |, and then get the line so I can get the bit after the |, which is the important bit for me.
I've been looking through the FCL for a method that will allow me to erase a line of text from a text file and replace it with another line of text. Neither the StreamReader nor StreamWriter have a method for replacing or removing Text from a text file, as does the string object. Are there any available methods for erasing just certain lines of text from a file, and then replacing them with others?
In my code, I'd like to locate a certain line in the text file, and then at that point in the text file, use a For...Next Loop to replace each successive line of the text file with new text:
Dim user_data_file As String = "user_data.txt"
edit_input = New StreamReader(user_data_file)
Dim edit_line As String = edit_input.ReadLine
[CODE]...
However, I can't find any methods that will allow me to do this.
Basically what I'm trying to do is read a text file line by line. After each line is read, it will put each line into a separate text box. I've been trying to do this for a while and so far I haven't been able to. I tried using a for loop, but that just put all my lines in to one textbox.
View 8 RepliesI'm reading a text file with StreamReader, line by line. If a condition is met, then I do an operation and then start reading the file again from the first line. I realize I could close and then re-open the file, but surely this would be very slow.
I could do this easily in VB6, but pulling my hair out trying to do this in vB.net. It seems that 'Seek' is the function to use, but it doesn't work.
I've seen other examples, where it works, but you must open it a different way -- with a file number.
Imports System.IO
Dim I as Integer
Dim LineText as String
[Code].....
I am trying to remove all whitespace from a text file and store each character into an array. Is there any way to combine all the lines together without leaving any whitespace? I tried the .replace method but it only removes whitespace for each line. It currently shows like that, but I want it to be 1 whole block of text without whitepace in every line:
[Code]...
I am in the process of developing a VB.net helper application that will combine two text files into one, remove the extra blank lines, do some calculations and spit out a new and improved text file.
My question is: at the beginning of each file is a header row that starts with a "01". How does one go about removing all of the other "01" rows but leave the first header line?
So far, I have succeeded at removing all of the "01" lines, which isn't what I want but hey, I got it to work
I have been working on this for quite some time now. I have a listbox that loads the names from a .txt file. When the user selects names I need it to delete the items from the list. I have the code to remove it from the listbox, but when I reload the form it puts them back in because it's reading the file.
View 2 RepliesI know this has been asked like a million times, but I cannot seem to find a solution that works for me. I have a text file..and lets say its named Test.txt.I have like a list of stuff in the file and I have a Remove button. I also have a listbox that has the contents in the Test.txt file listed on the form_load. So basically to try to explain this better..what I want is to delete the line that is selected in the listbox when I click the remove button. Let me explain in an example.The Test.txt has the same contents as the Listbox..so say my list is like this:
Hi
How
Are
You
If I have Hi as my Listbox.SelectedItem then I would like to remove that line from the Test.txt. I tried to load the contents of the file in a TextBox too and I can search and find the text in the textbox and focus on it and highlight it but I cannot delete it from there too.
I am attempting to get my program to store its, in this case, a Url list in a text file. This should be relatively simple and so far it has been, writing to the document has been easy and it has all worked well, however, I have been trying to get my program to remove a url from this list too. To achieve this I have created a temporary text file, named 'FavouritesTemp.txt' and write the content of a listbox (with the target of the delete command removed from it) and then replace the old text document with the new one. But I keep getting an error from this - saying that a process is already accessing this file, even though I have just created it! I have attached a picture of my error and the code I am using underneath.
Code:
System.IO.File.Create(My.Settings.ProgramInfoStorePath & "FavouritesTemp.txt")
MsgBox("Created FavouritesTemp.txt")
Dim FavouritesWriter As New System.IO.StreamWriter(My.Settings.ProgramInfoStorePath & "FavouritesTemp.txt", True)
For Each Item In FavouritesListBox.Items
[Code] .....
I want to modify a text file. It has a lot of lines of text in it. I want to add a line after a specific line (in the middle on other lines) and write strings there.
The code i have, writes to a specific line but it also overwrites the text on that line:
[Code].....
i would like to store contents from a text file line by line to arrays before copying them to another text file. what i have is currently like this:
[Code]...
Currently I'm only able to store the whole content into one variable, would like to store the content line by line in arrays.
I have an Excel file that downloads automatically, but for some reason the binary XLS file contains some garbage HTML text at the end of it.
When opening the file in the Excel application, it shows a warning but proceeding will automatically remove the garbage HTML text.
However, I need to open the file programmatically. When doing so via
Dim wb As Workbook = Excel.Workbooks.Open(ExcelFileName)
It throws:
Exception from HRESULT: 0x800A03EC
a) Get Excel to perform a similar action as if I manually opened it and remove the garbage HTML automatically. NOTE: Tried setting the XlCorruptLoad.xlRepairFile parameter and it didn't work.
OR
b) Remove the garbage text from the XLS binary file (FileStream?) and resave it before attempting to open the file with the code mentioned above.
The garbage html always comes at the very end of the file and starts with
I am using streamreader to read and streamwriter to write, I have put the lines into an array
[text file contents]
Remove [ ] *****************
-----
;this is -----
------
;this is another -----
[end of example file]
I want to remove the lines that start with "****" and keep deleting lines until i reach ";" I thought this would be simple but im missing something and I don't want to put this array into a listbox it is being writen to a text file.