I want to validate xml against XSD (VB.NET). My function look like this:
Private Function ValidateXML(ByVal xml As MemoryStream, ByVal xsd As String) As ArrayList End Function
How can I do the validation when my xml is a memorystream/stream (I use stream because I don't need to store the xml) and my xsd is a string (I get my xsd from a web servise as a string, and I do not need to store it in a file)?
I'm using WinPcap to capture incoming data. Basically I'm dealing with a continuous stream of incoming data, either as byte array or as memorystream (pieces up to 64kb).
I need to check this data to see if there's a certain url and then extract it.
The url I need to find looks like this:http://201.122.38.5/data/today/798572987-589571?139805890582 The length of the 'code' after "/today/" is always the same. The IP address changes. What's the best/fastest/most efficient way to continuously check these byte arrays or memorystreams and extract the urls without hogging the CPU too much?
[Code]...
I need a regular expression that can validate that a string is an alphanumeric comma delimited string.
Examples:
123, 4A67, GGG, 767 would be valid.
12333, 78787&*, GH778 would be invalid
fghkjhfdg8797< would be invalid
This is what I have so far, but isn't quite right: ^(?=.*[a-zA-Z0-9][,]).*$
I just want to know how can vb.net validate the format of a certain string for example, i have a string with 2011/13/02, and I want to check if it's format is in yyyy-dd-MM format,. how can this be done?
View 10 RepliesI have large lists of account numbers in an array to validate. They have distinct patterns of characters so ve decided RegEx is the best method. As it is I loop through every element and match. Is there a better way? I saw they Array.TrueForAll Generic Method but after messing with it a bit it seemed that I would have to write a separate function negating the benefit.
View 7 Repliesis my string that return the value, dim strID as string="2343-dsds3-65gff".if the values in all the strID are zero,i.e.,strID as string="0000-00000-00000". i want to display error.
View 2 RepliesI have a form that a user inputs either A B C or D into a text box. I need to validate that one of those four letters has been entered in the text box. I am using a case statement but I think an array might work better but I can't figure out how to validate a string in an array. Or if there is a better way to use the case statement...Here is my code snippet This works, but it seems like it is the long way to do it. Also as soon as I click OK on the message box it immediatly goes and shows my next form. How do I get it validate, let the user redo, and then bring up the other form?
[Code].....
I'm developing a VB Web Application in .NET3.5 using Visual Studio 2008. I'm having difficulty in validating some XML as a string before I add it to a HTML form to post to a 3rd party. I have an XML schema file from the 3rd party to validate against and at this point I'd like the application to perform the validation before each post.
After searching I've found references to a XmlValidatingReader but this is obsolete and I'm having difficulty finding another way to do it. Also all the good examples are in C# - for now I'm stuck with VB. This is what I have so far which I'm looking for with! Public Function ValidateXML(ByVal strXML As String) As Boolean
[Code]...
I would like to check the format of a string value (contained in a variable) before using it in further code.
- It must be 8 characters in length (no more, no less)
- It must be in the following format: 2 digits + 1 letter + 5 digits
I imagine the VB.NET code would be something along the lines of:If CStr(strMediaNum) (...not in the form [2 digits + 1 letter + 5 digits]...) Or (...datalength not equal to eight characters...) Then Exit Sub EndIf
codes one that validates that user will enter only uppercase letters in a textbox and no numbers and symbols. The second one should validate user only enters string no symbols and the third should only accept string and symbol
View 1 Repliesi am using an input box. the input should be an integer. if the input contains a "." then i want to display an error. if number is integer then do some code. i am trying to use somthing like this strInput = nputbox.... If strInput.contains(".") then messagebox show. Sometimes the answer is so blindingly obvious i fail to see it. Sdog
View 4 RepliesI am using this regex string in one of my programs to validate email adresses: "^[a-z0-9._%+-]+@[a-z0-9.-]+.[a-z]{2,4}$". This works well for the most part, but I just found out that it doesn't catch an address like this ... "john.doe.@yahoo.com" ... where there's a "." right before the "@", which is invalid, so my program tries to send it & throws an exception. How to modify my regex string to catch this situation?
View 4 Repliesis there any function to validate if a string has only numerical characters? I can cross character for character and verify if it is a number. But I look for something simpler or if already a function like that exists.
I cannot use IsNumeric or IsDigit because it returns numbers to True with point or comma.
I need only numeric characters (no comma nor points
I'm trying to figure out a way to validate the user data entered:
[Code]...
This is in MVC3, VB.net. I'm looking for an easy way to validate a users input data into the editorfor field.
Good Evening! I am attempting to write a code so that someone can enter characters into a text box and then press a button which will validate the string and then count the number of uppercase letters in the displayed text. I also have a button that will allow lowercase tabulation. However I cannot get either to work or display in the associated text boxes.
View 32 RepliesI have a problem with a memory stream.
I extract from an archive a Jpeg that's about 256 Kb, load it into a memorystream and display it into a picturebox
when doing that, my app ram ussage grows with 50+ MB
Here's the code
zip.Encryption = EncryptionAlgorithm.WinZipAes128
zip.Password = MainFrm._Pass
Dim str As New MemoryStream
[Code]....
I need validation for string to comply with next: no space char starts with one delimiter char ends with one delimiter char has no other char as delimiter char. Updated sorry missed that should only be one delimiter char at start and at the end
View 2 RepliesI wish I had never let go of my old pearl days, but those days are behind us Now, for the life of me, I can't remember how to write the regex I need I keep getting "TOO MUCH" validation!
the expression i have so far is: "(.*?).(jpg|jpeg|gif|doc|pdf)$"
but i know tis a little off for what I need What i need is to validate that a string passing through always = "*.extension"For instance, somehow, some strange way, user passes string as "bob.pdf"I want to convert the "bob.pdf" to "*.pdf"Or, say they just pass "jpg", then it needs to become "*.jpg"
Of course there is a billion other ways to do this, but none I can think of that would be less proc intensive than using regex I just can't remember the danged line I NEED!the ultimate goal in end of course is to set up:
[Code]...
I am having an issue using BinaryFormatter.Serialize. I have this generic extension method to "clone" an object via binary serialization:
[Code]...
This is killing performance. Anything more that about 7 or 8 clones brings the app to a halt. Why would this happen? The USING block ought to ensure the MemoryString is disposed of, right? Shouldn't a new MemoryString be created each time? I would think since the same original Mode object is the source for the serialization, the MemoryString length would be the same.
I'm working on a project to extract documents from a SQL Database and writing those documents to a network drive. However some of the files pointed at in the DB are encrypted files (RijndaelManaged)that reside on another network driveI have been able to retrieve, and decrypt the files using streams. Now aving problems saving or converting the Memorystream into an actual file.
Here is my code
Public
Sub ExtractDocument(ByVal ThisDocumentInfo
[code].....
I'm working on a project in VB.Net (2010) where I'm extracting files from an Document Management System.The Files reside on the network, and information about the files are in a SQL 2005 Database and have been encrypted with the Encryption Stream (System. Security. Cryptography. Rijndael Managed)i have retrieved the file, and decrypted them, but I'm trying to find out how to write the stream back to a file.I know the file type (which is stored in a SQL DB)I can't find a solution in any of the VB files or the MS site.
View 2 RepliesI am dynamically creating an pdf from a memorystream to a web browser, using itextsharp. It is called via https and it works in IE and Firefox but not Safari or Opera. I don't care about Opera but I do want it to work in Safari though. If I make the call with http it does work (creates the pdf) in Safari but not https
The error I get is The error is: unknown error (CFURLErrorDomain:303).
Ive a picture box on a webform. I want to load a picture into from a memorystream. The code im using :
If Me.ComboBox1.SelectedValue.ToString.Trim <> "System.Data.DataRowView" Then
Dim bmpTmp As Drawing.Bitmap = Drawing.Bitmap.FromFile(Me.ComboBox1.SelectedValue.ToString.Trim)
[Code]....
What I'm trying to do is convert a tiff image to a gif and display it in a picturebox on a webform. The source file is deffinatly be found as the commented out line which saves the file to the c: drive works perfectly. However I cant seem to get the picturebox to load with the memory stream.
I have some trouble with loading a richtextbox from a memorystream.I have some data in a database table stored as a byte array, I convert it to a string and load it into a memorystream and then I want to load that memory stream in the richtextbox. The application breaks on
Dim tr As New TextRange(rtbTemplate.Document.ContentStart, rtbTemplate.Document.ContentEnd)
though.
[code].....
I wrote a piece of code that grabs a fileupload, puts it into a memory stream, converts the main pic, and thumbnail pic, then saves them as jpegs, then updates the database.
Everything works fine, except one little glitch. If the DPI is above 300 then the image doesn't save right. It get's pixelated and blury.
here is the code.
Dim fileLen As Integer
# Dim myStream As System.IO.Stream
# Dim ImgContentType As String
[Code].....
I use WPF and my program has images in a DLL resource file. I have this well working way to read in images from disk:
Private Function GetImageFromFile(ByVal fileName As String) As BitmapImage
Dim buffer As Byte() = IO.File.ReadAllBytes(fileName)
Dim memoryStream As New IO.MemoryStream(buffer)
[Code]....
Now, how can I get images in this MemoryStream-way from a DLL resource?
The basic problem: If I use simply the "bitmap.UriSource = whatever uri" way and load many images in sequence like an animation it builds up the memory. I tried with the above memorystream way and it worked perfectly fine, but then I store my images in a dll and I don't know how to do this trick. If anybody knows how to read many images from a managed dll without building up the memory
I have this code to attach an image that is saved in my sql database as an attachments (or can be embedded picture) to an email. It is suppose to be a signature for an Outlook email. So I am attaching it to the email. Here is my code. On the line myNewMail.Attachments.Add I get the error "Value does not fall within the expected range."
Globals.EmailSignatureImage.Imagecontent is Byte() I know it has the correct data in it, because I show it in a picturebox correctly.
Dim
contenttype As New Net.Mime.ContentType
Dim memStream As System.IO.MemoryStream
[Code]....
The Clipboard class has very handy methods to check contents, like 'ContainsImage' and 'ContainsText'.How do I check if a MemoryStream contains an image or a text?
View 5 RepliesI trying to display image in picture box. The application have two part.First part is windows application, and second part is web service (asmx).This is the code for windows application:
Public Sub PrikazSlike()
Dim p As localhost.Service1 = New localhost.Service1()
PictureBox1.Image = Image.FromStream(p.PictureShow())
[code].....
I have this program that extracts ole objects from my access database and tries to save them as jpeg images. I keep getting an error on this line:
View 6 Replies
