I'm trying to validate the correct format for a phone number in a text box: (000) 000-0000 For a test, i made it so that a messagebox shows up saying "correct" if the format is correct. This test works well WHEN the format is correct. BUT when the format IS NOT correct, I keep getting an error saying that the index was out of the array.
[Code]...
I have had a look over some posts in here on a similar theme as to my question but none of them are getting me any further forward. All I am trying to do is make sure that when a phone number is entered in a textbox that it conforms to the following formats:
1) #### ### #### (All numbers)
2) ##### ###### (All numbers)
3) ###### (All numbers)
I am using VS 2005 pro and VB.NET. How do you format the DataGridView.DefaultCellStyle.format property for zip codes and phone numbers. I have a zip code and phone number column(s) that I want to be formatted. I have tried a lot of different things:
Zip code: "99999-0000" or "Phone Number: "(999)000-0000" or "(000)000-0000" and the like So far nothing has worked. I can get my date columns formatted correctly, but not these. Can any one give me some examples that work?
I want to display a phone number in a text box like this:
"(828) 524-5121".
In VB6, I could do this:
temp= Format("8285244121", "(###) ###-####")
and temp would be "(828) 524-5121".
If do this in VB2008, temp is "(###) ###-####".
just as the question says. I get numbers like 2125550938 or 20298277625552. these should change to (212) 555-0938 and (202) 982-7762 x 5552 respectively. this is in vb.net
View 4 RepliesI'm trying to format a phone number in VB.NET 2008 in the code. user can type in this numberfor example: (203) 555-1212The format I would like the phone numbers to appearis this:203.555.1212I haven't been able to find the correct format.I tried this:Dim x As String = "(222) 333-4444"Dim joe As String = String.Format("{0:###.###.####}", x)
View 4 RepliesI have a field defined as string for phone number which in my SQL cast to Integer.
Format the column as follows
DataGridView1.Columns("ContactPhone").DefaultCellStyle.Format = "(###) ###-####"
This works as expected for cells with a phone number but for cells without a phone number I get
{}- Which seems like the proper output for what I specified.
is it possible to format cells with no data (no phone number) to show up empty in their cell?
validation in vb.netemail_id validation,name,mobile number,Telephone number,zip_code,address i want to all code the textbox
View 3 Repliesi try to make a regular expression format to validate phone number at this format: (555) 555-5555 Dim IsPhoneValid As New System.Text.RegularExpressions.Regex("^/([0-9]{3}/)*[0-9]{3}*[0-9]{4}$")
View 3 RepliesI'm writing a part of an application for a movie ticket program.
Basically, I have to write an If statement verifying the age put in a textbox, based on a radiobox that is checked.
So, if the radiobox "PG" is checked, the age in the textbox has to be equal to or greater than 12. If "Restricted" is checked, then the textbox has to be equal to or great than 17.
I have a databound textbox that I would like formatted as a phone number ((###) ###-####), instead of being displayed as 10 numbers.
I'm using this on a databound label, which works fine. The same doesn't work on a textbox, though.
phoneNumber = CDbl(lblPhoneNumber.Text)
lblPhoneNumber.Text = phoneNumber.ToString("(###) ###-####")
Anyone know of something that will work with a textbox?
I need to create a textbox that accepts only numbers in specified format..does anyone has a clue on what is the best tecnique to acheave this?
View 3 Replieshow can i format a number while typing it on a textbox. For example, I type 1234.50 on a textbox and it will show 1,234.50 on the same textbox. I am trying this with my code but with no luck.
Private Sub txtClimit_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtClimit.TextChanged
Me.txtClimit.Text = FormatNumber(Me.txtClimit.Text, 2, , , TriState.True)
End Sub
I want to format a textbox in my form for a phone number. I would like to have the () and - be shown in the box always even if nothing has been typed in, and when you type in the phone number, it is inserted in and ends up with the () and - in the right place.
View 3 RepliesThis is a Library code I got from Microsoft for format a textbox into a numeric format...but it's doesn't works because error message "numberFormatInfo is not defined".
Public Class NumericTextBox
Inherits TextBox
Private SpaceOK As Boolean = False
' Restricts the entry of characters to digits (including hex),
' the negative sign, the e decimal point, and editing keystrokes (backspace).
[Code] .....
Details : I have the MultiModem (MT5656ZDX) . I wrote visual basic application for making the call using 'MakeCallAsynch(txtPhoneNumber.Text)' function. Also i have the callback event handler for get the line status and write the log. But my tapi call is not going the status except DAILING,PROCEDING,CONNECTED,DISCONNECTED and IDLE. Its not showing the line busy, phone swithed off status. Please guide me regarding this.
My event handler
Friend Sub LineProcHandler(ByVal hDevice As Long, _
ByVal dwMsg As Long, _
ByVal dwParam1 As Long, _
[code]....
I have the MultiModem (MT5656ZDX) . I wrote visual basic application for making the call using 'MakeCallAsynch(txtPhoneNumber.Text)' function. Also i have the callback event handler for get the line status and write the log. But my tapi call is not going the status except DAILING,PROCEDING,CONNECTED,DISCONNECTED and IDLE.
Its not showing the line busy, phone swithed off status. Please guide me regarding this.
[Code]...
I'm trying to match exactly the following format:
+639201112222
09201112222
and this is all Ive tried so far:
(+63|0)?d{10}
the problem is that it match 2920111222 in 29201112222. How can i create a pattern that will match only the formats below?
+63XXXXXXXXXX
0XXXXXXXXXX
+63 or 0 plus 10 digit number only.where X are all digits from 0-9.
Does anybody know what specific Nokia mobile phone should i use for my project development to send SMS through my PC using a GSM phone... I have my own mobile phone but it doesnt support SMS Text Format on AT COMMANDS. It shows error 303 when i use AT+CMGF=1. meaning my phone does not support Text format. It only support PDU code. I dont have any idea using PDU codes.
View 1 RepliesI'm looking to create a windows application in vb.net or c#.net that will capture the phone number of incoming calls. This would be a land line. What would the hardware requirements be?
View 3 RepliesI don't really need all the code, just a method of doing something.I'm trying to do number #42 on page 496 of the VB 2005 book. I'm able to get each number from each button on the phone to display, but I'm not sure how to go about adding the numbers to the number already on the screen. I can get 1 then a 2, then a 3, etc but not 123.
I believe the method is adding to a string, and I know I have to use concatenation or something.. I just need a push in the right direction.
I know this is an easy one but I cant seem to find it with searching..I have a textbox with a phone number as follows: 1234567890 how can I split that phone number and put it into 3 new textboxes like this [code]I have seen it done in vb6 with left,mid, and right but it seems that it doesnt work the same with vb.net
View 2 Repliesi have this problem iam working on its a phone number word generate i have a code that is correct no errors just 2 problems 1. my generate button is not working and 2. how can i get the words generate to appear like say the number is 4247288 the word would be Haircut here is my code:
[Code]...
Our company has an old intranet site, that has 1000's of pages, and ive created a loop to look at them all, but i wanted a way to put all the phone numbers it can find, into a text box, i have the code below but cant seem to get it to work.
Sometimes the phone numbers can be 111-222-3333 (111)-222-3333 111 222 3333
'Reg exp for phone number
Dim myMatch As Match = System.Text.RegularExpressions.Regex.Match(My_Text, "^([2-9]{3}-)?[2-9]{3}-d{4}$")
[Code]....
I have searched on google and asked friends, but have not figured out a way to add dashes while a user is typing either a phone number or a social security number or something of the like. I am using Visual Studio 2008, VB Windows Form. This is not for homework but I enjoy adding things to certain projects and thought this would be neat to incorporate into one of mine. I am also curious about allowing the user to enter the first three numbers for their area code and then send the focus to the next text box so that the user can type the rest of their number. I was thinking I could do something with the text box text entered event procedure where I would send the focus after three characters entered. Not 100% on the entire idea or if there is an easier way.
View 1 RepliesIF cell phone is connected with PC over BlueTooth or Wireless and someone call that cell phone is it a possible to get caller person number from cell phone ?
View 5 RepliesI need to take a fully formated number:
Ex: (111)-111-1111
And take out all the none integer characters, such as parens, hyphens, and spaces.So far I have:
sNumber = txtNumber.Text
If sNumber.Contains("-") Then
sFixed = Replace(sNumber, "-", "")
lblNumberOut.Text = sFixed
[code]....
sNumber and sFixed are both declared class/global level. The thing is, I've made two separate if's, i've made the second one an elseif, It just only enacts one if statement, such as only taking out the hyphens and not taking out the parens, or vice versa. I'm thinking i need to declare multiple sFixed (sFixed1,2,3, etc) but that seems terribly inefficient.
I am thinking of dialling the number and if it rang then it is existing but I am not sure how to implement such. I am on Vista and it looks like all comm ports are not available or that I don't know how to enable them. Upon googling I have found samples of TAPI but I am unable to make them work, the following code is supposed to call a phone no. but I am getting the exception "Value does not fall within the expected range." on the 2nd line and I am clueless as to how to fix it
[code]...
In one upgarde of my app, I will connect the PC to one Siemens phone, wich create a COM port.Now, I nedd send one number to the phone, for it makes me the call automatically.
View 1 RepliesI know you can get a currency symbol or a data format for a country using System.Globalization. However, is it possible to get the phone number format for a country from it as well. If not is there a way to get this information from the .NET Framework?
View 11 Replies