I have a form based application that works without issue at 100% (Windows 7), but one increases it to 125%, everything goes awry. Now, I know to set the form AutoScaleMode to DPI, which alleviates some of the issues, but some controls are cut off because of the form size.I know I can set 'AutoSize = True' on the form as well, but this gives unintended results and doesn't allow the user to resize the form as needed.What is the best way to handle DPI increases? Should I get the user's DPI and manually draw all the controls based on their DPI setting?
then s3 has precision 2, whereas both s1 and s2 have precision 1. This seems odd, especially as the documentation states that the return value of the addition operator is "A new SqlDecimal structure whose Value property contains the sum." I.e. according to the documentation, addition should not change the precision.
I have a simple question that most could probably answer. I have a button that when it is clicked it transfers information from that form to a microsoft word doc. Now what I want to do is everytime that button is clicked it creates a number that is displayed on the word doc. So this is how it would go:
first click- it would show a number 1 on the invoice.
second click- it would show a number 2 on the invoice.
This would continue as long as the program is used.
Ok i have a progress bar that increases when a download starts to finish. The once its compleate the next part of the script starts.
After all the script has finished, around 30 seconds. It starts the full process again but atm it wont start again as the progressbar is still complete.
I have tryed adding
ProgressBar1.Value = 0
To the end of the script to set its value back befor the script starts again but that dont work either :/
How would i get the progress bar to go back to its orginal state so that it can start all over again.
VB CODE
Dim Gimagepath As String Gimagepath = System.IO.Directory.GetCurrentDirectory() + "udimage.jpg" Dim Gimage As String
I'm trying to fix a problem that is just killing my program's efficiency. When I run it, it starts out at maybe 10M of RAM, but it gradually increases. Within 20 minutes, it can get up to 700M of RAM. Now, when the program is restarted, all of this goes away and starts anew, but restarting the program every so often is a very loose solution. Here's what my program does: there's an array in which many (anywhere from 500-4000 or so) links are placed. I have a webbrowser that navigates to each of these and does an action on them, then moves to the next page. For example: [Code]
And all of the actions work perfectly, but the memory exponentially increases, resulting in a crash if left on for too long. I've searched Google and all I've found is that that's not the actual usage, and that if you just minimize it and maximize it again it will go down, but it did not when I tried it. Why is the memory increasing so much like that, and is there any way to fix it?
I check the memory usage of my project from task manager, It always increases when I open forms but doesnt decrease when I close them. So the memory usage is getting bigger and bigger...
I recently made a change to the code within a loop in my code, and now when I run the code through Visual Studio 2010 Express, the loop runs about 10x slower than the previous loop.I did not make any significant changes (to my knowledge) to the code within the loop.I made the change so that the loop could handle various conditions I imposed in another section of the code.I know that it is this loop that is slowing everything down because I report the loop progress on my form.[code]I feel like my changed code should run better, but it doesn't.I know that my code is not written very efficiently (and feel free to comment on ways to improve it), but my main concern is the significant increase in computation time that resulted from my changes.The loop above is the main block of code within the Sub, which is run via a thread.In my tests, it is the only thread running at that time.Everything works, and the computation yields the correct result, but takes 10x longer than previously. Additionally, the number of iterations does not increase.So the new code isn't iterating excessively, it is simply taking much longer to compute within each iteration.
I am currently working a piece of code which needs to send an attachment in the email it generates. The attachment is a PDF document. Due to requirements I am unable to save the PDF and send it, so I have had to create a memory stream attachment.
The issue I have with this is that the file size is _500KB. However save the file on my machine and it is around 370KB.
This increase in file size is unacceptable. has anyone come across this issue before? If so how have they got round the problem.
Below is the section of code.
Dim memStream As System.IO.MemoryStream = Nothing 'assign number to the PDF name Dim filename As String = req.GetAccountNumber()
I have created a page containing the Wizard control. It's a very simple one. User selects some data on the first page, clicks Next and then has a choice of Previous or Finish. When they click Finish the form is submitted but, for some reason, the font size of all my labels increases. There's nothing in the code of the Finish button that would do that.
the goal i want to accomplish is when the user presses a button, "moneyamount" increases by a random number generated. the problem i am having is that after the action is finished the script does not seem to save the new value and always starts at zero. here is the script:
Private Sub button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles dojob1button.Click
Dim moneyamount As Integer = moneyamount + Int(Rnd() * 10) moneylabel.Text = "$" & moneyamount End Sub
This is a mathematics "testing" program, after every correct answer it increases the variable "userScore" by 1. This works perfectly along with the rest of the program, the only problem is that even when the answer the user inputs is WRONG and a message telling them they have got it wrong appears it STILL increments the "userScore" variable by 1..
Public Class frmMultiplication 'declare correctanswer as a variable which can be seen by the whole program Dim Correctanswer As Integer[code].....
I wrote an application to handle a joystick with directinput. It works fine if it uses the handle of the main window but it doesnt happen the same if the handle is the one of the component that contains the joystick's operation.
I mean:
main form handle: 15
component handle (which is inside the window and the joystick needs the focus of this component to work): 25
It always work if the handle i initilizate the device is the main form (15).How can i use only the handle of the component?
Possible Duplicate: Can .NET intercept and change css files?
I have configured IIS6 to get .NET to handle css files.I did the following steps
Launch IIS Manager Right-click on Default Web Site Click on the Home Directory tab Under Application Settings click on Configuration.Add a new association for .css and map it to .NET executable:
How can I check if this is working, i.e. I want to change the default style of a page depending on the url, i.e. if the referer url is http://intranet, it should continue to use the old existing style style1.css, if the referer url is http://intranetv2, it should use the new style style2.css.
I am trying to get a handle on the correct way and easiest way to do things. By easiest I am not talking about being lazy just accessing and modifying later on. I have started using my own classes and such but I have a few questions. Sometimes I want to create a control on the fly through code instead of using the designer. Should I create this control in the main form file or in a separate class? If I make it in another class it seems harder to access later on. Then again if I dont know that the control is going to be created(user clicks a button to add a control) how can I access it? Also it seems alot harder to access certain things when it is in another class. For example if I create a new window in a class and then want to check if it is there or not it is alot harder to do.
I need the intPtr for a form. Control.FromHandle(control) gives me the control from a handle, but I need the opposite--get the handle from a control. How do I do this?
I am trying to create a small utility that tracks desktop usage in detail, to the level of individual text boxes etc.... in other applications. However, it is proving quite tricky. I thought I had it nailed using the Windows api. The below code is just a snipet of the code but essentially it provides me the handle of the control that the mouse is over. I thought from here, it would be easy to to the same thing but to provide the handle of the control that the cursor was actually clicked on, for example, if someone is filling in a text box in an application, they would not necessarily move the mouse to get to the text box, they may tab to it. Does anyone know if there is a way to get the handle of the control that is in use?
Private Sub Timer1_Tick(sender As Object, e As System.EventArgs) Handles Timer1.Tick Dim ptx As Integer = Cursor.Position.X Dim pty As Integer = Cursor.Position.Y
I am going mad about getting the process id for one existing handle on VB2008.I tried both GetWindowThreadProcessId(hwnd, pid) and GetProcessId(hwnd), while PID always returns 0, I tried the same things in VBA of Excel, it works perfect, so this is somewhat weird,
I have referred DLL in my project. I have to handle the event from DLL in VB.net code. I guess we can do using WithEvents. Can you give me complete picture?
I am having a SP run in my VB application every 10 seconds to check for any new rows that have been inserted to the database since the last check. What is the best way to do this? Most likely it will be 0 or 1 rows, but I am afraid at random times it maybe more than 1 and so I thought I would fill it in a DataSet, but I came in here to see if there are any other better ways. If dataset is the best way, how do I do a For Each Row in the dataset to process some VB code for each row?
I read stuff from a SQL DB (database) using a data set. Some of the columns in the DB may contain NULL. I want to go through the table in the dataset and print, or use in some other way, the data. But when I try to use a certain data that corresponds to a NULL in the DB my program crashes.How can I detect - in the dataset - that it has no value and that I shouldn't try to use it?
Private Sub Get�rendenLista(ByVal e As System.EventArgs) '---------------------------------------------------------------------- ' This function fetches a list of �rende from the table �rende '---------------------------------------------------------------------- Dim cno As New SqlConnection
The short program below runs just fine when it is the only item on a form. However, when I put it into the ItemInsertTemplate of a ListView control, I get the following message:
Handles clause requires a WithEvents variable defined in the containing type or one of its base types
Line 30: Protected Sub btnDate_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnDate.Click
The error message identifies Line 30 as the problem.I get the same message for Sub clnEvent_SelectionChanged How do I correct this?
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="clnControl.aspx.vb" Inherits="clnControl" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server">
Does anybody know if there is an API function that would let me cancel a print job.I already know how to get a handle to a printer and how to enumerate the print jobs using the printer handle.
how to make VB handle my associated files.I made a program that opens fine when from the EXE file. But however, when I try to open it from the associated file, it behaves the same way as if opened from the EXE.So, where (in what method?) do I tell VB how to handle those files?
I have several installations of my Linq-to-Sql app running in the field. Now I've created a new version, which adds a new column to a certain table. I've added this column in the dbml file. But when updating the installation, I want to preserve the existing database. How to handle this? Linq-to-SQL doesn't seem to like this inconsistency.Is there an easy way to update the existing database using my new dbml file?
