I have the following class:
Class MyClass
Property MyInteger as Integer
Set(ByVal value as Integer)
_MyInteger = value
[code]....
As I'm not using any validation etc in my Property, is there any advantage of using a Property in this case, or would it be neater to use:
Class MyClass
Public MyInteger as Integer
End Class
Below is the class with a property.
public class abc
{
public int MyProperty { get; private set; }
}
What's the benefit of typing private access modifier in setter ?
What is the advantage on creating ur own class and property??when making a system like POS. . . .it is necessary to create a class or property??It is possible that I will create a module and i will declare the import statemnt in the module and i will declare ol of the mysql commnds in the module and I will open the connection in the module so that ol of my forms can see my declaration?
View 2 RepliesI have a very simple class that holds a few public properties - ID, Text, Colour, etc. and a Boolean called 'SelectedItem'. Just like the Checked property on RadioButtons, only one item can have its SelectedItem property set to True within a particular group. Note: there will be several separate groups (lists), each allowed to have only one item with SelectedItem = True.
My first thought was that I would probably just have to handle everything outside of the class, setting SelectedItem to False for every other item in a particular list when another item was selected. But that seems rather inelegant to me. So I've been trying to think of how this might be done within the class. For example: could I perhaps have a private string property called say "GroupName" - set in the New sub when adding a new instance of the class - and then use a private shared method to set every item's SelectedItem property to False, provided the item has the same GroupName as the newly selected item? I would have a go at doing this but I have no idea how to enumerate every instance of a class from within that class, or whether that's even possible. Is it? Or is there another (better) way to achieve my goal? Here is a cut-down version of what I've got so far:
Public Class ResourceItem
Public ID As Integer
Public Text As String[code]....
As can be seen: instead of instantiating a new ResourceItem and passing that as an argument to the manager's Add procedure, I'm simply passing the details of the new item and the procedure is creating the item from those. I don't know whether this is a good or bad idea - please advise - but I've done it because I couldn't figure out how to make the SelectedItem property only writeable by the manager, so I wanted to avoid having directly accessible objects that could have their SelectedItem property set to True without it deselecting all the other items in the same group. Of course that still leaves the possibility of setting a variable to one of the manager's list items and setting it from there, so I would still like to know how I could prevent that, if possible.
UPDATE: I didn't use the code above in the end, deciding instead to go with Cyborgx37's solution - which seems to work perfectly well for me despite the warnings about best practice. I also realised I would need to use the same class in another scenario where multiple items could be selected, so it was easy to add a Boolean property to the manager to enable that.
I have the following code:
Public Class MyColorsClass
'Constructors
Public Sub New()
'Empty Constructor
[code]....
However, if the empty constructor was called to instatiate this class then the colortype is not yet set. Therefore, if one accesses the 'IsColorCool' property it will always return 'False'. Now for the sake of this example, I must keep the empty constructor as part of the class.Now I could add some code in the 'IsPropertyCool' to check and see if a ColorType has been defined, and throw an exception if it has not been set, but I don't really want to do that.I also could always move the logic OUT of the property and into a method on the class called 'DefineIfColorIsCool' or something, and make the owness on the caller to make sure the method was called if they want to use the property 'IsColorCool'?
Supose a base class
Public Class airplane
Private var_num_seats As Integer
Private var_num_engines As Integer
[code]....
Obviously, I don't wish that the class Glider has the method "start_engines" neither the property "num_engines". Otherwise, other child classes may have. How can I supress these property and method in child class, not just ignoring (if I can)?
I have procedure (Import) that calls a for a new instance of frmImportData. I also have a class name clsBatch that has a data table property called prpParametersTable.For some reason, I get an error (indicated below with ERROR>>>) when trying to assign prpParameterTable to cv_dtImport2. The error states "Object reference not set to an instance of an object.". Why does this error not happen when I assign dtBP to cv_dtImport1? Both cv_dtImport1 and cv_dtImport2 are equal to Nothing and in my Import procedure dtBP = prpParametersTable.
Public Sub Import(ByVal clsB As clsBatch)
Try
Me.cv_clsB = clsB
[code]....
I have three class files, accounts.vb and transactions.vb in addition to my form.vb. I am unable to retrieve a member variable from on class from inside the other. When the combobox index changes, the program loads the correct account (checking or saving) from two different sequential files. I don't think I have the calcBalance procedure in the correct class file. And that is what I am having trouble with. Accessing it to display it. [Code]
View 1 RepliesThis is a bit of a continuation from a previous post for which AtmaWeapon was very informative.
Problem:
A parent class has a sub class with various properties. A property of the parent class is a List(of T) with T = the sub class The issue is how to store data in the sub class of the instantiated parent
Some example code (hopefully formatted correctly):
Code:
'=========== Class Definitions =============
Public Class courseClass
Public Class timeTableClass
[Code].....
I'm looking for a tutorial on how to Adding a list(of Class) or Collection as another Class's Property.What I am after is something like the Columns Collection for the DatagridView control.I would like to add Items in the graphics screen. Where the item list is displayed in the left panel and the selected Item properties are displayed in the right panel.
View 4 RepliesI have a class that has the following property that is generated by the methods in the constructor.
Public Class clsLoadTables
Private _ds As New DataSet
Public Property ds() As DataSet
Get
[CODE]........................
My problem is that I do not want to inherit this class, but I have other classes that need to access the ds DataSet property. If at all possible I would like to not use inheritance and not load my datatable more than once in the program.
Here is my failed attempt to access the property inside another class that is not inheriting clsLoadTables:
[CODE].........................
How I can access this dataset that I want to load only once in the program from many classes without using class inheritance or a global module?
I know that an interface can contain another interface within it.But;can a class contain another class within it?Can an interface contain another interface within it?
View 9 RepliesI have two classes, and for a property in one of the classes I'd like to be able to load it up with an array of the other class. However my attempt at accomplishing this results in a "Object reference not set to an instance of an object" error. I know it's a rookie mistake, but I'm stumpedssist?
My code is as follows:
Namespace Parking
Public Class garage
[code]......
bare with me during this silly example. :-) Let's say I have a class like this:
Public Class Animal
Public iLegs as int32 ' Number of legs
Public bWings as Boolean ' Wings? Yes/No
End Class
And another class that inherits the "Animal" class and adds one more property:
Public Class ScaryAnimal
Inherits Animal
Public iScariness as int32 ' 0-100, how scary is it?
End Class
Now, if I have an instance of "Animal" with some values in it, and I decide I want to cast it to a ScaryAnimal for some reason, how do I do that without having to create a new instance of "ScaryAnimal" and copy each property value?Basically I'm looking for a way to do this, without having to write the lines marked with '*** below:
[Code]...
im considering to study properly 1 of these two languages because in vb.net the limitations ive encountered were not very significant, and C# because i hear all ppl shouting at how vb express is for newbs and how C# is the way to go..What i would like to ask is, what is exactly the main advantage of C# over VB Express because what ive read from wikipedia, the only difference is the language, while C# might have 1 thing or 2 extra to vb express and vice versa...[URL]..So, could anyone clear me up please? i would really like to know if vb express is really worse than C# or the differences are only in syntaxes.
I personally used to hate VB Express at the begining but now im fastly changing my mind so im more inclined to this language, but i dont wanna wake up in 3 years realising ive been wasting so much time in a language that isnt as good as "the competition", get it?
I have a litlle idea about for the sql parameter. I need other explanation why using sql parameter and what are the Problem not using sql parameter.
View 10 RepliesWell how can I do this? So my app is faster?
View 5 RepliesWhat is the advantage of using USING keyword in vb.net??im new with the USING and it seems that most people are using this.
View 5 RepliesIn this post Jon Skeet pointed out that the following code should be changed to conform with the .NET naming conventions. Doing that would also decrease the amount of noise in the code.
[Code]...
I must admit, I was pretty much like a sheep and was following what others have done before me. I thought the prefix did not look right and then to have it twice did not make sense either. After looking at a couple of .NET Framework examples, it looks like this would be closer to the standard.
[Code]...
What's the advantage of declaring a function as "Shared"? I've noticed that it doesn't require you to instantiate an object to use the method when it declared as "Shared". Is that the only upside?
View 3 RepliesThese two snippets do the same thing - is there one that's better than the other, or is it just a matter of preference?
Using context As MyDatabaseDataContext = New MyDatabaseDataContext()
Dim test = context.Employees.Count
End Using
vs.
Dim context As MyDatabaseDataContext = New MyDatabaseDataContext()
Dim test = context.Employees.Count
I have a VB.NET web app that is about 2000 lines of code, contains about 20 different subroutines, and about 50 different functions.Is there an easy way to "rewrite" this to take advantage of classes and objects?
View 5 RepliesI am running from a problem while iterating over class properties.
I have my first class:
class Item
private _UIN as integer = 0
private _Name as string = ""
[Code]....
I get UIN, Name, ItemCategory but i expected UIN, Name and Category.
I am a bit unclear about this and dun know why this is happening? What should i do to correct it?
I have 2 classes and I set a property in class A... how can I get this value within Class B?[code]...
View 3 RepliesHow can I get a string with the name of a property at run time?Obviously using GetProperty, as shown below, is NOT a solution since it requires knowing the property name to begin with:
Imports System.Reflection
Module Module1
Public Class Country
Public Property Capital As String
Public Property Population As Long
[Code]...
What I want is to get the name from an instance (Nation.Capital for example) or from the type (Country.Capital).
Private _Order As Order() Public Property Order() As Order() Get Return _Order End Get Set(ByVal value As Order()) _Order = value End Set End Property
I need to get property name 'color' inside the 'order()' array, i am trying ' Order.color ' but its not getting,
I have created a very basic class for an object that has nothing so far other than a "name" property.
What I want to do is allow the User to add new properties to the class. Basically all the properties will be strings, but I would like to learn how to generally allow the User to create new properties for the class.
I'm currently writing a HMI for an automated machine in VB.Net 2010. I have a custom class that turns a Border green or red depending on the value of an input on a remote I/O module.
The connection to the remote I/O module is through a COM object provided by the manufacturer. I have three remote connections, lets' call them g1, g2, and g3. They're of type Manufacturer.ConnectionObject.
I would like to specify, using a property that I can set in XAML, that instances of MyCustomBorder use g1, g2, or g3. Unfortunately, setting up a Property called g and typing 'g1' into the property field results in the message "Property value is not valid. Details: Property 'g' does not support String to Value conversion."
[code...]
I need to implement a converter between String and the custom class, Manufacturer.ConnectionObject, but I have no idea how to accomplish this, especially since Manufacturer.ConnectionObject is part of a closed-to-me COM object.
When you create a property in a VB.NET class how do you tell it which category it will belong to when it shows up in the property window?
View 4 RepliesI have a Class that is defined as
Public MustInherit Class Entity(Of T As Entity(Of T))
And various classes derived from it. I would like to have another class accept all of the derived objects as a property, but I cannot seeem to find a workable syntax. If it were a parameter of a sub, I could say
Public Sub Foo(T As Entity(Of T))(TheEntity As T)
I can't seem to get that to work for a property:
Public Property E(Of Entity(Of T))() As Entity(Of T)
Gives me "Type parameters cannot be specified on this declaration"
Public Property E() As Entity2008(Of T)
Gives me "Type Parameter T does not inherit from or implement the constraint type ..."Is there an acceptable way to do this or am I stuck with using a Set Sub and a Get Function?
