RichTextBox C#
When i do a comparison
if RichTextBox.Lines.Count() > 2
//Do Something
For some reason i get these data stored in rich text box, while i am working on restricting that i need to validate for the screwed up data
[0] - "East coast road"
[1]- "New York"
[2] -""
This returns count as 3 where in there should be only 2, how do i eliminate that white space next line?
I am looking for a way to count words in VB My full code is as follows Public Class lblTranslator
[Code]...
I am unable to load rich text files into my rich text box. It worked fine yesterday, would there have been anything I could have changed by accident?
With OpenFileDialog
.Filter = "Text format (*.txt)|*.txt|Rich Text Format (*.rtf)|*.rtf|All files (*.*)|*.*"
[Code]...
but I am getting the error File format is not valid when i attempt to open any Rich Text file
I have a rich text box which I use in order the user is able to add pictures, coloured writing, different font etc... however I need to load specific text in the rich text box when the user load the Form.how I can add (I guess) the HTML to load this every time the user load the form.
P.S the text will change depending on who loads the form so I can not do a simple
RichTextBox1.LoadFile("C:Documents and SettingsDesktopSigniture.rtf")
I want to count length of a userId and change the string to that many asterisks. I also want to take the account number and replace all characters except the last 4 XXXX.
View 2 RepliesI need to seperate a name into 2 parts using split the first part being 2 letters "That was easy" but the last part of the name would have an unknown lenght. so how do I get the unknown length? I believe I understand the Join Part here is what I have but it only works when you know the lenght of the name
Project Notes
'Form has two textboxes and one button
'first text box holds a first and last name
' 1-seperate the first and last name into 2 variables
[code]....
How do I trim a text if text's width is bigger than a specific unit of measure (for example 3 centimeter).
View 14 RepliesBasically, Is it possible to get a grids row count using jquery.if my grid has 20 rows in it not including the header or footer, i want to now the count of actual rows, this will tell my users how many tasks they have in their list.
View 3 Repliesi want to trim a text from the 4-th letter and i want to put the trim text into a richtextbox...how can i do this? i search and i don't find something good....
View 3 RepliesI need to trim the last for characters off in a text box. These characters are either .jpg, .bmp, or .gif.
View 10 RepliesI'm try to trim the end of a text
[code]...
The Drive String equals to "C:" But I need to change it to "C:"
I which to use the text of a textbox to fill another text box. I only want to use the first 5characters of the text. I which not to change the original textbox text.
View 2 RepliesOn the main form of my application, I have a Rich Text Box which is where the user will be entering information. The text is black. then, i have a button which calls the dialogue "Notes" A dialogue appears, with a rich text box. the user should then be able to enter text into the box, click "OK", and the text entered into the Notes dialogue be inserted to the rich text box on the main form -- with the font colour "Red". The rest of the text in the main rich text box on the main form should remain black.
View 2 Replieshow to apply the correct syntax to read the text file which is in C drive
I just wondering how to apply on it in my coding.
Here is sample text files i would like to create the program to read the text files content:
Example:
0x0C03C6ED Wed, 27 Jul 2011 00:33:18
0x0C038E28 Wed, 27 Jul 2011 00:36:29
0x0C039289 Wed, 27 Jul 2011 00:39:51
[Code].....
I have text box which I use the properties window, datasource set to bindigsource1 in my dataset.. I want to trim the text that is being populated.. Is there a wayt o do this through the visual studio gui or is it redo in codebehind?
View 1 RepliesI'm Making a Simple syntax highlighter and I'm Doing the highlighting in the text Changed event of a RTB and for obvious reasons I can't re highlight the whole document each time someone presses a key so i highlight one line each time the text changes. But this creates a Problem. If someone pastes code into the RichTextBox It only highlights the last Line. So is there a way to get if the user typed the text in with his keyboard or pasted it from the clipboard in the text Changed event?
View 6 RepliesI have this assignment that says: Create an application to let the user enter a sentence, then calculate how many words there are in that sentence. I know how to count the "Char" in a word (using .Length), but for this assignment, I really have no idea how to count the words in a sentence. What kind of method am I supposed to use for this particular assignment?
View 3 RepliesI know how to cut off characters at the end of a string using vb script, which uses the LEFT(string, #) syntax, however, how do i do this using vb.net?
and my second question, I have a string being sent into a drop down menu that gets the data pulled from an access database using a data source control. How do I format it so say, it only shows the first 100 characters of that string in the dropdown?
I have a question, how would i have a button, then when you click it, it puts the text at the text cursor in the RTF?
View 5 Replieseveryone! I've been at this for a while, and I'm not sure how this issue can be resolved:I'm working on a project in VB.Net, and I have a form with a rich text box. I have a groupbox with 4 radio buttons inside that are intended to change the font color of the text. Coincidentally, I have to repeat this same functionality for a 2nd set of radio buttons that would change the text font family.
At any rate what I've only been able to do is the following to successfully change the font color of whatever text I highlight in the rich text box:
Private Sub rbtnBlack_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles rbtnBlack.CheckedChanged
rtbxTextEditor.SelectionColor = Color.Black
End Sub
Private Sub rbtnRed_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles rbtnRed.CheckedChanged
[Code]...
Is there a way that I could write a sub (I'm assuming I would use a sub, since I don't think I need to return anything, thus eliminating the use of a function) that would handle the action of changing the selected text color in the rich text box without having to use a separate sub for each radio button? Mind you, per my teacher's specs, she doesn't use a button handler for any of this.
is it possible to make first 60 characters in a rich text box a different color than the remaining text?
View 25 RepliesI will show 3 columns of text in rich text box. i want show the column border with color.i can separate the texts with tabs or spaces but showing data in columns and cells will improve the visual of my program .
View 1 RepliesOkay, so what I want to do is directly output formatted RTF text to a Rich Text Box control in VB.NET. I don't want to find the text, select it and color it as it is not practical for what I'm doing. I've tried outputting RTF code but that isn't working either. Can I actually do this or will I have to write a dll?
View 1 RepliesI am working on an applictation to scan windows files to check for missing files, i have a couple questions on how to do this.I would like to use the %systemroot%system32 that way that it doesn't matter what drive letter it is, i'm not sure how to do this because when i tried it, it told me the file i was looking for didn't exist (in this case C:windowssystem32 undll32.exe) which does exist. Is there some way to use the %systemroot%?
Also, i am trying to print the resaults to a rich text box such as if rundll32.exe is missing put in the box "rundll32.exe is missing". How do I allow it to write it in the box, I tried the print command, but it didn't work.
I've been wanting to create a look like the attached jpeg Ive been looking around for a few hours for a solution to make text boxes transparent or have a background image. I've found a few projects on this form and elsewhere which include transparent text boxes, but every time I try to use it the way I need to--with the text box over a picture box--there are always various rendering errors. Most of the time, the text box is transparent if its just placed on the form (not over any other controls). But when I place them over other controls (like picture boxes), the 'transparent background' always take on the color of the form background.
This is one that I was trying to use. I found a few others around, but they all had the same render errors more or less.[URL]...I figured transparency or background images would have been supported natively. Anyone have any ideas? Maybe I missed something in my searches. I didn't really see anything which adds background images in text boxes (rich or otherwise). At this point, I'd just like anything that works, so it doesn't really need to have transparency--just a simple background image would be great.
what is the code for finding the shortest,average and longest sentence form the text box
View 4 RepliesHow can I change certain text's color (like Visual Studio does with "Public Class" or "Public Sub") is inside of a Rich Text Box?
View 14 RepliesHow can I fully justify text in rich text box?
View 1 RepliesI want to transfer data from one rich text box to another but when i use RichTextbox2.text = RichTextbox1.text it transfer just text not images.if there is any way to do so?
View 4 RepliesI have ~ 1 page how to that is currently in a text file which I want to add to a richtext box.I am just wondering if there is some way I can just copy/paste it so it keeps its formatting etc.
View 1 Replies